Best A Mortise Lock Body

MPOWER CRB7 Combination Router Jig Mk3 *MEGA BUNDLE* 9 Separate Functions – Including Large and Small Circle Cutting Jig – Multifunctional Router Guide for Routers for Woodworking

  • ...s the Parallel Edge Guide. The usual design of the edge guide is large, cumbersome, time consuming to set up and has a disappointingly small range to penetrate in-board from the edge. However, the CRB7 Edge Guide is a considerable time saver when batch routing many boards with the same dado or groove dimensions..
  • 4. Mortise Hinge Lock and Flute Jig : A pair of micro adjustable precision machined jaws.
  • these sit either side of the work piece re-establishing a safer level of surface contact between router and work piece. Allowing accurate Mortise or Hinge and Lock Rebates or flutes to be machined. Work mortise length with uninterrupted “Sight lines”. Cut centred and off centred mortises. Cut hinge and lock rebates. Repeat cut sets of flutes. Edge Mould Parallel to edge groove or channelling..
  • 5. Offset Router Base Plate. 6 Anti Tilt Router Support. 7 Adjustable Mortising. 8 False Panel Rebate Copier. 9 Adjustable Straight Edge Clamp Guide. 10 EDGE AND DOWEL TRIM KIT Creating a stable router platform, maintaining a consistent cutter height and Increasing routing pass speed with the Tracer Racer Bearing..
Check Stock

STB Sliding Glass Patio Door Lock, Mortise Type, 2-Point, 7-51/64

Check Stock

CoreSure Smart Keyless Entry Door Lock - Fingerprint Electronic Deadbolt Door Lock, Auto Locking, Biometric Smart Door Lock and Password Card - Compatible with Tuya Smart Home App for Remote Access

  • ...entional door locks use pin tumbler mechanisms so practised thieves could not pick the lock without a lot of difficulty. A fingerprint lock is keyless so that the door only unlocks when an authorised fingerprint is captured in the scanner. This is smart door lock with key option included. Must use supplied mortice. Mortise has 50mm / 2 inch backset and 71mm / 2.8 inch case depth. Faceplates is 160mm x 22mm.
  • ✨【ALL-IN-ONE SMART LOCK】A biometric lock can be programmed to store fingerprints of multiple users. You have multiple ways to unlock your door: smart phone, keypad, fingerprint, two IC cards and two mechanical keys supplied.
  • ✨【INCREASED CONTROL】 Remote access is such a handy application to have, especially when you have visitors in an office or guests at home. You can share the code with your guests temporarily and change it when you want to revoke the access rights of your visiting guests. The CORESURE fingerprint door lock is smart, secure, yet understated so that it blends into your home and life.
  • ✨【100% SATISFACTION GUARANTEE】We provide a the best customer service levels. If you're not satisfied with our product or arrived in damaged condition, we are willing to issue a full refund or a replacement for you , no questions asked. ....
Check Stock

Full Mortise Cabinet Door or Dresser Drawer Lock w/Skeleton Key - Antique Furniture Hardware | S-15

  • The package contains one lock with key (KY-3AB).
  • Pin is centered 11/16″ down from top of lock.
  • This is a full mortise furniture lock can be used in old furniture. This lock can be used for drawers and right hand doors.
  • Overall Size: 1 7/16″ High x 1″ Wide.
  • A high-quality reproduction of antique furniture lock. The lock is made of steel.
Check Stock

(Set of 4) Combo Entry Entrance Keyed Door Knob Lock Set Door Knobs & Single Cylinder Deadbolt Lock Combo Keyed Entry Set, Satin Nickel Finish Door Hardware & Locks by Probrico

  • Material: Lock Cylinder: Copper. Keys: Copper. LWZH door handle: Zinc Alloy with black anti-corrosion powder coat finish..
  • Dimension: Handle size: L 6.3"/160mm, W 1.77"/45mm. Lock body: L 3.2"/80mm, W 2.2"/55mm. Center distance: 35mm.(Please refer to the picture for details)..
  • Fit for: Works on door panel thickness 1.38"-1.97"(35mm-50mm). The sliding door lock fits either left or right handed door. The sliding door mortise lock fits for patio door, pocket door, bathroom door, kitchen door, closet door and so on..
  • Application scenarios: This door lock can be bolted inside or locked outside.When it is bolted inside, it can be unlocked by key from outside.(Pay attention to the correct direction of the lock cylinder, otherwise it may not be able to lock or the key may not be pulled out. If the above situation occurs, please rotate the lock cylinder 90 degrees and reinstall the lock plate).
  • Note: Please be sure to follow the instructions manuals to install the lock step by step and allow 1-3mm error due to manual measurement. If you have any questions, please email us and we will reply you within 8 hours..
Check Stock

7 pcs Square Hole Mortise Chisel Drill Bit Tools 3/4\ 5/8\ 9/16\ 1/2\ 3/8\ 5/16\ 1/4\

  • 1. You will get 7 different sizes mortise chisel drill bit 1/4 Inch (6.4mm), 5/16 Inch (8mm), 3/8 Inch (9.5mm), 1/2 Inch (12.7mm), 9/16 Inch (14mm), 5/8"(16mm), 3/4 Inch (19mm). They can meet your different ordinary need. Each square hole drill bit is packed in a single plastic case, easy to maintain..
  • 2. The square hole mortise chisels drill bit are made of high-speed steel / HSS, heat treatment, high hardness, lengthened core, high concentricity..
  • 3. These woodworking morstising chisel bits is with high performance flute design geometry for superior chip extraction..
  • 4. Woodworking drill bit sets with long drill core and square chisel, easy to lock the hole on the wood, can reduce labor intensity of construction workers, speed up the construction speed, reduce construction costs..
  • 5. These woodworking morstising chisel bits set fit mortise and drill accessories, mainly used for woodworking aspects in construction, installation, renovation, decoration industry, etc..
Check Stock

Lanai Sliding Glass Door Handle and Mortise Lock Set with Oak Wood Pull in White Finish, Includes Key Cylinder, Standard 3-15/16” CTC Screw Holes, 1-1/2\ Door Thickness

  • Includes inside and outside pull, mortise lock and strike, key cylinder, and thumb latch.
  • Easy replacement for most sliding door mortise lock sets.
  • Choose your door thickness and receive correct hardware- no cutting down hardware or screw lengths!.
  • Classic exterior pull and oak wood interior pull handles work on right or left handed doors.
  • Sturdy die cast construction with durable white powder coated finish.
Check Stock

SAMSUNG SHP-DH537 SHP-DH537MC/VK Mortise Handle RFID Card Tag/Passcode Smart Digital Door Lock (SHS-AML220)

  • DETAILS » Program up to 100 user codes and 100 RFID tags. Fits doors 40mm to 80mm thick. Automatic locking. Compatible with certain NFC items. Handle levers are adjustable to left or right side. Battery operated with emergency power contact..
  • DESIGN » Samsung door locks have a sleek modern design which would complement any interior or exterior door in the residential home, apartment, or commercial business office building..
  • EASY TO USE » Use the digital touchscreen numeric keypad to enter a password or RFID faster than you can turn a key. Shut the door and the magnetic sensor automatically locks the door for you..
  • MORTISE » Sturdier and more durable than cylindrical deadbolt locks but do require door modification. The mortise is electronic for faster open/close and has the added security of a latch..
  • SECURITY » Rigorously tested construction, random security code feature, bump and pick proof, intrusion alarm, PSB fire tested and fire detection sensor, anti tampering lock out. The lock has your back..
Check Stock

Sliding Glass Patio Door Handle Set Oak Wood Interior Handle and Exterior Pull in White Diecast Finish+Mortise Lock 45° Keyway Fits 3-15/16” Screw Hole Spacing Non-keyed with Latch Locks

  • ☛【 COST EFFECTIVE TO REPLACE OLD OR BROKEN DOOR HANDLES】: When your door handle is broken, old or unsightly, don’t replace the door entirely,....
  • ☛【INCLUDES】: Interior Handle, Exterior Pull,Mortise lock, Thumb Latch, 6XScrews. Standard reversible, non-handed handle set that can be mounted....
  • ☛【EASY INSTALLATION】:This is a DIY project in the box. For handles with 3-15/16” hole spacing & a Mortise (Latching style) lock. Remove 2....
  • ☛【REVERSIBLE DOOR HANDLE & THUMB LATCH】:Also known as "Non-Handed”. Our handle is designed for Right or Left-Handed or the door that opens....
  • ☛【NON-KEYED】:The exterior die-cast pull comes non-keyed. This handle is NOT CONVERTIBLE WITH KEY FUNCTION AT THIS TIME!.
Check Stock

Prime-Line C 1282 Mortise-Style Sliding Door Handle Set – Replace Old or Damaged Door Handles Quickly and Easily –For Right- or Left-Handed Doors - Satin Nickel Plated, 3-15/16” Mounting Holes

  • REPLACe OLD OR BROKEN DOOR HANDLES – When your door handle is broken, old or unsightly, don’t replace the door entirely, just get a new sliding patio door handle set! This handle is for mortise-style doors and features an offset thumbturn/lever..
  • INCLUDES – The patio door handle set comes with matching inside and outside satin nickel plated handles that fit on door thicknesses that range from 1-5/8” to 1-3/4” thick. Mounting hole centers are 3-15/16”..
  • NON-HANDED CONSTRUCTION – The sliding door handles can be used on either right- or left-handed doors by reversing the handle on the mounting plate..
  • EASY INSTALLATION – Installation is quick and easy with all hardware included. The satin nickel plated lever operates various mortise latches installed in the door (mortise latch sold separately). The handle set is non-keyed, but a lock can be added..
  • COMPLEMENTS YOUR SATIN NICKEL SLIDING PATIO DOOR – Used by many patio door manufacturers, the durable satin nickel plated handle set will complement your sliding patio door and stand up to repeated use..
  • For all dimensional information please refer to the line art and compare to your needs before purchasing.
  • This handle set is used to replace damaged or missing mortise/hook style handle sets ....
Check Stock