PRECISE FIT. This trailer coupler is designed to mount onto an A-frame trailer tongue and couple to any standard 2-5/16-inch diameter trailer ball.
SECURE COUPLING. The sleeve-lock latch mechanism of this trailer tongue coupler fully encompasses the trailer ball when coupled, providing maximum security and safety for towing.
ENHANCED SECURITY. The sleeve-lock latch accepts a safety pin or coupler lock that passes completely through the neck of the coupler, ensuring maximum security for heavy-duty loads.
HIGH-STRENGTH. Constructed from high-strength steel with a solid steel neck, this trailer ball coupler is rated as a class 4 trailer coupler and has a capacity of 12,500 lbs. gross trailer weight and 1,875 lbs. tongue weight.
CORROSION-RESISTANT. To easily outlast the elements, including rain, snow, dirt, road grime and more, this A-frame tongue trailer coupler is finished in a durable black powder coat and makes a great boat trailer coupler.
Shocker Hitch Vertical Channel Weld On Tongue Adapter for Trailer A-Frames Completely Welded
Trailer Tongue Vertical Channel Style Weld On Adapter for Trailer A-Frame. Trailer Tongue Vertical Channel Style Weld On Adapter for Trailer A-Frame..
Equipped with 6 Adjustment Holes. Raw Steel. The six bolt hole pattern works great with typical vertical channel bolt on trailer couplers. Actual vertical channel is 3-1/2" x 11-3/4" w/ 2" on center bolt pattern.
The outer front is 4" wide, the outer rear is 11" wide. From front to back it measures 7-1/2". Weight Rating: If you are using 2 bolts to attach coupler then its 14,000 lbs if using 4 bolts then 20,000 lbs that also assumes this kit is properly weld onto the trailer and the coupler you are using can handle those respective capacities..
Allows you to convert your trailer a-frame to one that accepts Vertical Channel couplers. Welding required for installation..
3 Style to choose from - Completely Welded, Spot Welded & Components Only (2 Sides,Base & Vertical Channel). Made in the USA by Shocker Hitch - Arthur, ND.
Made in USA, STEADYfast Stabilizer System for Parked 5th Wheel, Travel, and Camper Trailers with Round Jack Footplates and Auto Power Leveling - Item C
Made in USA system. Stabilizes your 5th Wheel or Travel Trailer with Auto Power Leveling System in less than 60 Seconds..
This System is designed for Big Foot, Level Up, Ground Control, and similar power leveling systems with cylinder type jacks.
Approximately 2 Hour Installation. 60 seconds to engage. Permanently installed so there is nothing to setup or store..
Eliminates Need for Tripod, Between Wheel Chocks, and Slide Out Jacks..
NovelBee 2-5/16\ Ball Class IV A-Frame Trailer Coupler with Powder Coated Black,14000LBS Capacity
PRECISE FIT. This trailer coupler is designed to mount onto an A-frame trailer tongue and couple to any standard 2-inch diameter trailer ball.
SECURE COUPLING. The sleeve-lock latch mechanism of this trailer tongue coupler fully encompasses the trailer ball when coupled, providing maximum security and safety for towing.
ENHANCED SECURITY. The sleeve-lock latch accepts a safety pin or coupler lock that passes completely through the neck of the coupler, ensuring maximum security for heavy-duty loads.
HIGH-STRENGTH. Constructed from high-strength steel with a solid steel neck, this trailer ball coupler is rated as a class 4 trailer coupler and has a capacity of 7,000 lbs. gross trailer weight and 1,050 lbs. tongue weight.
CORROSION-RESISTANT. To easily outlast the elements, including rain, snow, dirt, road grime and more, this A-frame tongue trailer coupler is finished in a durable black powder coat and makes a great boat trailer coupler.
DEPENDABLE STRENGTH. This A-frame trailer jack is rated to support up to 2,000 pounds trailer tongue weight.
VERTICAL RANGE. This trailer tongue jack allows for 15 inches of vertical movement and can be fully retracted for towing (9-1/4-inch retracted height, 24-1/4-inch extended height).
EASY OPERATION. This trailer tongue jack features a side-wind handle for easy operation. The handle also has an integrated grip for comfortable handling when raising and lowering the trailer coupler.
CORROSION-RESISTANT. For long-lasting corrosion resistance against water, dirt, road salt and more, this trailer jack is protected in a durable black powder coat and zinc-plated finish.
SECURE INSTALL. This A-frame trailer jack can be bolted into place or welded onto the trailer tongue (hardware not included).
DEPENDABLE STRENGTH. This A-frame trailer jack is rated to support up to 5,000 pounds trailer tongue weight.
VERTICAL RANGE. This trailer tongue jack allows for 14-1/8 inches of vertical movement and can be fully retracted for towing (10-3/8-inch retracted height, 24-1/2-inch extended height).
EASY OPERATION. This trailer tongue jack features a top-wind handle for easy operation. The handle also has an integrated grip for comfortable handling when raising and lowering the trailer coupler.
CORROSION-RESISTANT. For long-lasting corrosion resistance against water, dirt, road salt and more, this trailer jack is protected in a durable black powder coat and zinc-plated finish.
SECURE INSTALL. This A-frame trailer jack can be bolted into place or welded onto the trailer tongue (hardware not included).
bullke Trailer Jack Block Stand | 12,000 lbs Capacity Trailer & RV Stabilizing Pads | Strongest Blocks for RV 5th Wheel Camper, Post, Foot, Tongue Jack, or Stabilizer Round, Square Pad Leveler
⍟ DURABLE & UV RESISTANT: The bullke stabilizer blocks for camper trailer jack supports up to 12,000 lbs.. Our trailer stabilizer stand is made in the USA with Recycled Plastic which is UV Resistant..
⍟ MULTI-USE: Our jack pads is for motorhomes, trailers, RVs. fits most trailer jacks with Wheel, RV Camper, Pop Up, Boat, etc. Stabilize and secure with rv stabilizer blocks that have up to 12,000lbs capacity - the strongest RV jack block on the market today!.
⍟ VERSATILE: These camper wheel chock stabilizer stands are designed to be stacked to adjust for all terrains. Understanding that you have different needs for trailer tongue support types, and trailer stand capacities, here at bullke we offer these rv wheel stabilizer even leveling blocks in sets of 2, 3, 4, and 5 RV jack pad blocks..
⍟ DIMENSION: The unique RV blocks for leveling by bullke are lightweight, yet superiorly sturdy with dimensions of 10 X 10 X 4 inches. They are expertly designed and made in the USA with thick and heavy-duty materials to support most tongue jack, foot, post, and stabilizers (round or square)..
⍟ QUALITY YOU CAN TRUST: Rest assured knowing that these rv jack foot plate stands are made from premium thick plastic right here in the USA. Here at bullke to build prod....
ZXFOOG Rubber Trailer License Plate Bracket-Trailer/Truck License Plate Light Bracket and License Plate Frame Carbon Fiber ,Universal Front Bracket for Boat Trailer with Stainless Steel Plate Screws
【Heavy Rubber Trailer Bracket】: All the hardware included in the kit is shown in the first picture. If the package you receive is missing the relevant hardware, please feel free to contact us for a free replacement.Rubber Trailer License Plate Bracket designed for replacing your Plastic license plate bracket or Aluminum license plate bracket, Prevents loss of trailer/truck license plate. Let the license plate bracket with light last longer.
【Durable Trailer License Plate Bracket】: Black multiply fabric reinforced neoprene rubber license plate bracket for boat trailer,Flexible, durable, corrosion proof, tear proof, fatigue proof, cold temperatures, good UV resistance and long lasting,Replaces flimsy plastic, rigid steel and aluminum holders.
【Carbon Fiber License Plate Frame】: The perfect Match Plate Frame Carbon Fiber (thick plastic license plate frame), matched with 4 carbon fiber plate license plate screws, makes your Trailer / Truck back or front trailer license plate bracket more beautiful.
【Trailer Bracket Easy Installation】: 32PCS stainless steel trailer license plate bracket screws, no need to be purchased by dealers, Rubber Trailer License Plate Bracket can easily mounts to 2" hole pattern on lamp assembly, Standard size for almo....
BGGTMO Trailer License Plate Bracket Holder- ATV/RVs/Boat/Jet Ski Utility Trailer Metal Car Tag Frame and Black Aluminum Cover Mounting Kit with Screw Caps
Trailer License Plate Holder- The aluminum metal trailer light bracket is designed for replacing your plastic trailer license plate light holder, prevent damage and loss of your utility boat trailer, PWC, Snowmobile, ATV, Jet ski, RVs license plate, make the trailer frames last longer..
Flexible Trailer License Plate Mount- Sturdy thickness aluminium to keep strong and No bending easily, ensure no rusting and longer years lifetime. The installation size for the bracket is from 1-5/8" to 2-1/2", and the installation size for the license plate is from 4" to 8-5/8", suitable for license plate locks of various models, such as trucks, trailers, motorcycles, etc..
Black Aluminum License Plate Frame- The matte black license plate cover adopts rustproof aluminum, smooth and high gloss surface. 1.3mm thickness, strong and durable. The four-corner round design will not scratch your hands. Heavy duty metal license plate frame, with black screw cap, is suitable for the front or rear license plate of various colors of cars.
Easy To Install- Our trailer plate bracket kit matches with license plate light of size 2"....
