Best Abrasive And Finishing Products

3M Cartridge Roll 341D - Metal Sanding and Finishing - 3/8\ x 1.5\ x 1/8\ - X-Weight backing - Die Grinder Abrasives

  • Small size is ideal for sanding and finishing hard-to-reach spaces.
  • Cloth backing supports heavy sanding yet frays to expose fresh abrasive.
  • Resin bond withstands high heat and pressure.
  • Aluminum oxide abrasive in a closed-coat layer provides fast cut and long life.
  • Rolls attach to a compatible cartridge roll mandrel (sold separately).
Check Stock

Zubastick Dental Abrasive Stainless Steel Strips Finishing polishing 4mm small 5pcs

  • The polishing strip used for polishing for tooth gap fillers where difficult to reach. Works well..
  • The moderate softness of the dental polishing strip can make them closely fit with the tooth surface, thereby exerting the maximum polishing and dressing effects..
  • Dental finishing strips suit for teeth abrasive great to remove tiny overhangs to form a healthy and beautiful adjacent shape..
  • Dental sanding strips can reduce the gingival process..
  • Dental finishing strips are good resume defects of tooth form..
Check Stock

Diamancel Luxury Diamond Double Foot Buffer - #10 Fine Grit Finishing Rasp and #22 Coarse Grit Buffer - Smooths Calluse, Rough Skin

  • FOR LARGE CALLUSSES - #22 COARSE GRIT AND FINISHING FOOT BUFFER - #10 FINE GRIT: Use on dry skin – our #22 Coarse buffer is for large calluses. Follow with our #10 Fine Grit buffer to smooth feet..
  • MADE OF REAL DIAMONDS: The diamond is also the hardest, most abrasive stone known to man. The natural long-lasting abrasive properties of diamond make Diamancel the most durable files on the market..
  • PROFESSIONAL GRADE, SALON-TESTED: Our files have been extensively used in salons for years and can resist their intensive usage. For daily upkeep, your diamond buffer will last a lifetime..
  • EFFORTLESS, EFFECTIVE: The abrasive natural properties of diamond do the work for you - Effortlessly..
  • EASY MAINTENANCE, REUSABLE, WASHABLE: Our files work best when cleaned. Scrub the file with soap and soft brush after each use. Rinse with water..
Check Stock

Signi Poly Strip Abrasive Drawing Wheel,Clean & descale welds,Paint Rust and Oxidation Wheel Remover Wheel, Polisher Sander Wire Draw for Hand held Polishing Machine (120x100x19mm)

  • High strength wear-resistant fiber mesh as the base material, and the resin elastomer and high quality emery or silicon carbide using special technology organic combination, to form a high strength, high wear-resistant, honeycomb shape, soft grinding wheel, it is more than the traditional grinding wheel steel brush abrasive cloth, etc..
  • The workpiece for rough grinding, deburring, cleaning, paint (paint), sanding, drawing, grinding, decorative lines, grinding, matte, soft light, polishing and mirror processing, with durable, efficient, self-sharpening, workpiece surface not black, high finish..
  • Used for all metal products, ceramic products, wood products, plastic products, stone, etc.
  • Will not damage the surface of the object, high work efficiency, very costly.
  • Can be installed to drawing machine for wood polishing and burnishing, used for surface preparation, conditioning and finishing. Used to remove rust spots, oxide coats and paint, to strongly polish stainless steel and all metals, especially stainless steel, aluminum, iron, etc..
Check Stock

Bosch CBCL1260M 10 In. 80 Tooth Edge Non-Ferrous Metal-Cutting Circular Saw Blade

  • Brute Carbide – an extra-hard micrograin Carbide formulation that increases impact resistance.
  • Triple chip grind (TCG) tooth geometry – designed for a high quality of finishing in highly abrasive materials.
  • Speedcoat – an antifriction finish that delivers cooler running and less dust than bonded abrasive wheels.
  • Zero to slightly negative hook angle – produces clean cuts without binding in extrusions, tubing or Other delicate profiles.
  • Extra-hard steel blade body – delivers accuracy and resists bending and deflection for true cuts.
Check Stock

JET J-41002, 2\ x 42\ Belt and 8\ Disc Sander, 1Ph 115V (577004)

  • DELUXE MITER GAUGE: Turns and locks for common angles, 45 degrees both left and right.
  • HEAVY-DUTY: Has a steel base, rubber feet, and cast iron construction.
  • REMOVABLE PLATEN: Allows for sanding, grinding or finishing of outside curves or odd shaped work pieces on the belt.
  • THREE-IN-ONE: Abrasive belt unit does the work of a jig saw, coping saw, or hand file while removing material and finishing.
  • EASY ADJUSTMENTS: Allows an operator to get into small openings, plus handle odd shapes and angles.
Check Stock

Brush Research GB Standard Duty Flex Hone for Block Cylinders, Aluminum Oxide, 3-1/2\ Diameter, 240 Grit (Pack of 1)

  • [QUALITY]- Proudly made in the USA. The FLEX-HONE is long lasting, lowering total cost of use compared to other brush options..
  • [DESIGN]- The FLEX-HONE is manufactured to be self-centering, self-aligning and self-compensating for wear for easy use..
  • [FINISHING BENEFITS]- Offered in a wide variety of grits and abrasives to allow machinists to achieve specific finishing tolerances as well as a beautiful crosshatch finish..
  • [CROSSHOLE DEBURRING]- Ideal for finishing and deburring simultaneously in a single setup. Can be used in virtually any rotating spindle..
  • [ALUMINUM OXIDE ABRASIVE]- Excellent on aluminum, brass, bronze, and softer non-ferrous materials. 240 AO is commonly used for deglazing Nikasil cylinders..
Check Stock

Scotch-Brite Surface Conditioning Belt, 48" Length x 2" Width, Medium, Maroon (Pack of 1)

  • Non-woven, surface conditioning belt cleans, blends, deburrs and finishes.
  • Medium grade abrasive provides ideal starting point for final finishing of stainless steel.
  • Reduced loading and heat build-up allow extended operating time and consistent surface conditioning results.
  • Reinforced backing and non-woven open web material provides superior flexibility for detail work, over contours and edges.
  • Removes surface imperfections, grindlines, mill, and other marks.
Check Stock

BHA Interleaf Flap Wheel Abrasive Drum, 4\ x 4\ with 3/4\ Quad Keyway (80 Grit)

  • SPECIFICATIONS - These Aluminum Oxide Shank Mounted Abrasive flap wheels come in a pack of 10. Grit 60, 2-inch in diameter, 1-inch thickness with ¼ inch shank..
  • APPLICATIONS - Designed for use on flat, irregular, and contoured surfaces, as well as hard-to-reach places such as pipes and tubing, Eco Edge's flap wheels are suitable for a variety of applications, including de-burring, finishing, polishing and cleaning on metals. It can be used to remove rust and weld burr, as well as paint removal on wood..
  • DESIGN - Aluminum Oxide Shank Mounted Abrasive Wheels are 003cb003eEngineered & Designed in USA003c/b003e by Eco Edge and Assembled in China. Abrasive Cloth has been handcrafted, for perfection and quality assurance..
  • SHANK - Sturdy Solid Stainless Steel Shank fits all power drills and power tool..
  • SAFETY - Max speed for 1" flap wheels: 30,000RPM |1.5" flap wheels: 25,000RPM | 2" flap wheels:25,000 RPM |3" flap wheels: 20,000RPM. Never exceed maximum recommended RPM speed. Always take safety precautions including, but not limited to, gloves, guards, and facial protection..
Check Stock

Brush Research BC Standard Flex Hone for Brake Cylinders, Hydraulics and Valve Guides, Aluminum Oxide, 3/4\ Diameter, 240 Grit (Pack of 1)

  • [QUALITY]- Proudly made in the USA. The FLEX-HONE is long lasting, lowering total cost of use compared to other brush options..
  • [DESIGN]- The FLEX-HONE is manufactured to be self-centering, self-aligning and self-compensating for wear for easy use..
  • [FINISHING BENEFITS]- Offered in a wide variety of grits and abrasives to allow machinists to achieve specific finishing tolerances as well as a beautiful crosshatch finish..
  • [CROSSHOLE DEBURRING]- Ideal for finishing and deburring simultaneously in a single setup. Can be used in virtually any rotating spindle..
  • [ALUMINUM OXIDE ABRASIVE]- Excellent on aluminum, brass, bronze, and softer non-ferrous materials. 240 AO is commonly used for deglazing Nikasil cylinders..
Check Stock