Mr. Gasket 6279 Truck Mounted Battery Installation Kit
RUGGED DURABILITY -This dual battery isolator kit is all you need to charge a dual battery system. It features a voltage sensitive chip ensuring your primary battery is always ready for your vehicle to run. This dual battery isolator is also built to withstand extreme weather environments, vibration and is water resistant..
EASY TO INSTALL - No alternator or ignition connection needed,You don't need any additional components to complete installation as everything is included in the kit, including leads, connectors, screws, zip ties, and more..
VOLTAGE SENSITIVE RELAY - The Automatic 140 Amp Dual Battery Isolator is all you need to charge Two Battery Systems. Voltage Sensitive Relay (VSR) cuts in at 13.3 volts and cuts out at 12.8 volts to ensure your primary battery is always charged and ready to start your vehicle. It's like having two separate power sources for each battery while only having one alternator!.
FITS A WIDE VARIETY OF VEHICLES - This Dual Battery Isolator Kit with Printed Installation Instruction Manual Gives You the Power for Your Recreation Without Needing to Worry About Getting Home After.12V, 140A, 13.3V cut-in voltage, 12.8V Cut-out Voltage, Suitable for 12V 4WD, Marine, Truck, Caravan & Camping Applications..
DNA Motoring LEPOW-010 Aluminum Battery Box Relocation Kit 13.5\W x 9.5\D x 10\H
【Easy installation and waterproof】 No need for alternator or ignition connection. After installation, it can still be used normally even if it is affected by vibration, various bad weather and other factors. At the same time, the isolator supports waterproof function, and the waterproof grade is IP67. (Only suitable for lead-acid battery to lead-acid battery or lithium battery to lithium battery).
【Manual Modes】 Press and hold the "Power" button for 3 seconds, the upper blue (LED) indicator light is on, and the manual mode is turned on. In this mode, click the "Power" button to turn on/off the isolator. Click the "power" button, the lower red (LED) indicator light is on, and the isolator is turned on.
click the "power" button again, the lower red (LED) indicator light is off, and the isolator closure..
【Automatic Mode】Long press the "Power" button for 3 seconds, the upper blue (LED) indicator light goes out, and the automatic mode is turned on. In automatic mode, the voltage-sensitive relay (VSR) cuts in at 13.3 volts, and the lower red (LED) indicator lights up. The voltage-sensitive relay (VSR) is cut off at 12.8 volts, and the lower red (LED) indicator light turns off.
【LED SCREEN REAL-TIME VOLTAGE DISPLAY】 The surface of the isolator....
Battery Isolator:Battery isolators are suitable for applications that need to isolate multiple batteries, such as mobile audio, marine, powered sports, etc. It is used to isolate batteries that power AV, navigation, etc. It allows the second battery to be fully dedicated to the sound system and does not create a voltage drop like common isolators tend to do. The isolator will draw less than 1 amp when your vehicle is powered on..
Extends battery life:its a must for daily driver systems,This 500 amp continuous duty relay does not have the voltage drop that a solid state battery isolator has and does a much better job of charging auxiliary batteries through..
Feature:Made of high-quality materials, excellent performance and durable.Easy to install and start up immediately..
Warranty: For any reason, if you are not satisfied with your purchase, please contact us directly. We offer Half a year warranty, 100% satisfaction guarantee..
HiLetgo 2pcs ADUM1201 Dual Channel Digital Magnetic Isolator Replace Optocouplers
Lower power consumption than the same data transfer rate when the traditional optical isolator 1/10, the minimum operating current 0.8mA..
Performance higher timing accuracy, transient common mode rejection, the degree of matching between channels are better than the traditional optical isolator..
The smaller the integration, the printed circuit board (PCB) area of 40% of the traditional photoelectric isolator..
Isolate IT Lavalier Microphone Isolation Shield System for Sanken COS-11 (Black)
FOR LAVALIER MICROPHONES: This lightweight mic isolator is designed to fit Sanken COS-11 lavalier microphones. To install, insert the lavalier wire while flexing the isolator open and then slide the microphone down into the cavity..
COMPACT ISOLATION: This isolation device is made with a Sorbothane lining that can absorb up to 94.7% of vibration noise and energy while in use. This mic isolator can also reduce noise from mic hits, rustling clothes, and other unwanted sounds..
SAFE TO USE: These heavy-duty isolators are safe to use on all materials and can be attached directly to the skin. To fix onto fabric, skin, or other materials, attach the isolator to an adhesive, like a sticky piece of tape, to ensure a sturdy hold..
OPTIMAL SOUND QUALITY: Thanks to its slim, contoured design, this miniature mic isolation adapter can provide crisp, quality audio when attached to all types of garments and between layers of clothing..
PROFESSIONAL AUDIO RECORDING: This portable lav filter can be used to provide high-quality sound for an interviewer, reporter, broadcaster, presenter, podcaster, and anyone else in a field that requires up-close, quality sound..
Canon PowerShot SX540 HS 20.3MP Digital Camera with 50x Optical Zoom + 64GB Delux Accessory Bundle
Multiple Outlet Wall Plug: 12 AC outlets with 1680J Surge protector wall mount, 15A Current Limit switch, Safety ground indicator Light, surge protection indicator light, 2 hanging hole for all types of Standard Electrical Outlets.
