TerraBloom ECMF-315, Quiet 12' (313mm OD) Inline Duct Fan with 0-100% Variable Speed Controller, Air Tight Metal Casing, Energy Efficient EC Motor.
TerraBloom EC duct fans are used in indoor grow facilities and vertical farms, heating and cooling transfer, commercial drying and air filtration applications. Our inline blowers can also create negative pressure environments, simulate wind, exhaust odors and smoke as well as intake fresh air from outdoors.
Built with cutting edge brushless EC Motor and dual jet type blades, this blower delivers 1662 CFM airflow rate using 260 Watts at max speed. It translates into only $660 annual cost of 24/7 operation at max speed using $0.29 average cost per KWH. Our fans don’t “purge” or waste electricity at lower speeds..
Our EC fan gives you a unique flexibility of controls – choose any speed from 0 to 100% using 2 (digital and analog) included speed controller without creating background noise or hum at low speeds. Or choose to upgrade to a wireless remote control (Model: ECMF-WR) or intelligent thermostat speed controller with temperature programming (Model: SC-ECMF). This fan supports 3d party PWM and 0-10V controllers via 3.5mm TRRS port.
Coated steel housing resists rust, protects motor and blades from accidental damage and harsh elements to reduce maintenance in demanding applications. This fan has IP64 ingress protection rating.
4" Inline Fan - 100 CFM, Metal Duct Booster Fan, ETL Listed, Pre-Wired 6 FT Grounded Cord - Great for Grow Tent Exhaust and Intake, Register Booster for 4 Inch Ducts
4IN INLINE FAN FOR GROW TENT VENTILATION: Use It As Intake Fan to Bring Fresh Air to Grow Tents or Rooms. Can Be Used as Exhaust Fan in Smaller Set Ups with LEDs or CFL Lights..
HOUSEHOLD VENTILATION: This Versatile Inline Duct Fan Is Designed To Exhaust and Intake Air Through 4″ Ducts, Serve as Register Booster Fan to Improve Airflow from HVAC Units to Remote Register Vents, Exhaust Odors in Bathrooms, Workshops, Ventilate Stale Air in Basements and Attics, Etc..
IN LINE FAN SPECS: Airflow 100 CFM, Power 18W, Voltage 120V/110V, Speed 2600 RPM. ETL Listed, Compatible with Certain Speed Controllers. For Indoor Use Only in Environment With Max Temperatures Not Exceeding 140F..
PACKAGE CONTENTS: 4 Inch Duct Fan, Instructions Manual. 4 Inch Diameter x 7.25 Inch Length, 6 Foot Grounded Power Cord..
WARRANTY: This Inline Duct Fan is Covered by 1 Year Warranty. Contact Us through Amazon For Service..
iPower GLFANXCONTROLMAXV1 Variable Vent Fan Speed Adjuster HVAC Controls, One Switch with 3 Settings for Inline Duct Exhaust, Black
Wide variety of applications: If you do not have a grow tent, do not fret as this controller can be applied to many situations. These can include but are not limited to greenhouses, kitchens, bathrooms, and many other HVAC set ups.
Safety and protection: When it came to your grow, your safety and protection is of the upmost importance. Featuring an easily removable fuse, this device is protected in the event of power surges and item malfunction.
One switch for 3 settings: ‘H’ ‘M’ ‘L’. Make it easy to adjust the speed of your inline fans and duct fans.
Specs: Built-in grounded plug for safe operation.
voltage/frequency: 120V/60HZ. Amperage: 15A.
Note: This controller is not suitable for shaded Pole motor and brushless motor fan.
VIVOSUN 6 Inch Air Carbon Filter Smelliness Control with Australia Virgin Charcoal for Inline Duct Fan Grow Tent Pre-Filter Included Reversible Flange 6 x 18
Superior Carbon Quality: Made of imported Virgin Australian activated charcoal, delivering 100% filtered airflow.
Eliminates Smelliness: Protects from chemical irritants and eliminates smelliness from pungent indoor grow operations to bathrooms, basements and....
Effective Smelliness Control: Eliminate some of the most undesirable, pungent smells and particulates from indoor grow tent, hydroponics grow room.
Versatile Applications: Item can be used as intake or exhaust filter in a variety of setups including use with 4-inch inline fans and duct fans,....
HVAC Duct Start Collar, 12\ Round Snap Together Sheet Metal
4" Plastic inline round duct connector with backdraft damper..
Outside dimension of the duct fits 4" inch flex or solid ducting pipe..
Assembly: Press on chosen duct - flexible or straight - and use montage glue. tape or steel clamps tighten the connection..
Connect dryer duct, exhaust or any other duct that needs only one way airflow with this backdraft preventer to ensure required air direction, and remove polluted air from accessing habitable areas..
perfect for Heating. cooling or air conditioning - HVAC. bathroom and kitchen air exhaust. Heat-resistant from: 5 °F to 160 °F..
iPower 6 Inch Air Carbon Filter Smelliness Control Scrubber with Australia Virgin Charcoal for Indoor Plant/Inline Duct Fan/Hydroponics/Grow Rooms, 6', Silver
Effective odor control: Protects from chemical irritants and eliminates odors from bathrooms, basements and kitchens. Absorbs odors from pets and smoking, pungent smell and particulates from indoor grow tent.
Superior carbon quality: 1050+ IAV Australian RC412 activated carbon: High-quality carbon for higher absorption and long service. Filters 3 times more odors and particulates than standard filters. You will get 100% filtered airflow.
Reversible flange and base: Air flow: 400 CFM. The flange and bottom can be removed to reverse the charcoal canister, allowing the filter body to be flipped upside-down for reversible smell filtration and an extended service life.
Versatile applications: item can be used as intake or exhaust filter in a variety of setups including use with inline fan and duct fans, intake and exhaust fans, air exchange fans, ventilation ducts, and other accessories.
Pre-filter included: We recommend replace the pre-filter every 6 months to protect your filter. Dimensions: 6'' x 16''.
Vent Systems 4\ inch Air Vent Duct Connector Flange Straight Ventilation Pipe Plastic Ducting Connector Plate For Cooling Heating Ventilation System HVAC 4\ inch - Pack of (1)
...length according to your needs. Two 3-inch clamps make the installation a breeze.
WIDELY APPLICATIONS - The 3 flexible duct usually be used in heating, ventilation, and air conditioning (HVAC) system to deliver and remove air. Plays an important role in delivering and removing air in hydroponic grow rooms and tents, inline fans, bathrooms and attics, heating and cooling transportation, and other installations. it also can be as ac exhaust hose and dryer vent hose.
2 Pack 4 Inch Flexible Ducting Hose 12 feet, Black Aluminum Ducting Dryer Vent Hose with 4 Screw Clamps for Heating Ventilation Air Conditioning (HVAC), Boat Blower, Exhaust Grow Tents
...gth according to your needs. Two pair of 4-inch clamps make the installation a breeze.
WIDELY APPLICATIONS - Flexible ducts usually be used in heating, ventilation, and air conditioning (HVAC) system to deliver and remove air. Plays an important role in delivering and removing air in hydroponic grow rooms and tents, inline fans, bathrooms and attics, heating and cooling transportation, and other installations. It also can be as ac exhaust hose and dryer vent hose.
3Inch Flexible Ducting Hose 16.5 feet Black Aluminum Ducting Dryer Vent Hose with 2 Screw Clamps for Heating Ventilation Air Conditioning (HVAC), Boat Blower, Exhaust Grow Tents
...length according to your needs. Two 3-inch clamps make the installation a breeze.
WIDELY APPLICATIONS - The 3 flexible duct usually be used in heating, ventilation, and air conditioning (HVAC) system to deliver and remove air. Plays an important role in delivering and removing air in hydroponic grow rooms and tents, inline fans, bathrooms and attics, heating and cooling transportation, and other installations. it also can be as ac exhaust hose and dryer vent hose.
G17 Part# G17 - Nail Polish DaniPro Anti-Fungal Clear Top Peace By Alde Associates LLC
Highest Rated Premium Airflow Control Backdraft Dampers.
Spring-loaded butterfly aluminum damper blades encased in a 20-guage galvanized steel housing.
May be installed in any position or orientation to prevent backflow and designed for use in AC, Heating, Vent and other HVAC application temperatures....
Extremely easy and secure inline duct insertion installation. Available in 4", 5", 6", 7", 8", 10", 12", 14" and 16"..
Minimal pressure to open. 0.04 to 0.08 in. w.g. Maximum automatic back flow protection.
