WILLHI 10A Digital Humidity Controller 110V WH1436HUM-PRO Humidistat Switch Hygrometer for Mushroom Greenhouse Grow Tent Home Brewing Reptile Planting Humidifier Dehumidifier
【IMPROVED HUMIDISTAT】We have improved the humidity controller: simplified operation, larger power, wider control range(1%~100%RH), standard U.S. outlet, enhanced robust sensor probe, overload protection, delay protection. NOTE: NO WIFI connection!.
【HUMIDIFICATION MODE OR DEHUMIDIFICATION MODE】Humidification mode OR dehumidification mode according to the settings and device you plug into the controller..
【MAX LOAD】Rated for 10 amps. 1100w@110v or 2200w@220v. DO NOT overload this humidity controller. Humidity Accuracy: ±1%, Probe Measurement Range: 1%~100%RH, Working Humidity for the controller panel:<85%RH, Power Supply: AC 110v, 50/60Hz, Power Consumption: <3W.
【PLUG AND PLAY】 Insert the probe first and then set ON & OFF value. This humidity regulator will turn your device on/off as programmed to keep humidity between the desired range. Comes with a 3m(9.8ft) probe sensor. Measure range is 1%~100%RH..
【WIDE APPLICATIONS】Our humidistat switch is widly used in grow tent, greenhouse, basement, grow room, store room, reptilephibian terrarium. Perfect humidity control for growing mushrooms and other plants, seed germination, fruit development, fermentation, reptile pet....
MS6508 Digital Temperature Humidity Meter, Akozon Digital Psychrometer Thermometer Hygrometer Humidity Monitor with Temperature Gauge Meter with Dew Point Wet Bulb Temperature
...an measure dew point and wet bulb temperature, and display the ambient temperature, dew point temperature, and wet bulb temperature. The dew point is a measure of how much water vapor is actually in the air..
【High-precision measurement】: PM6508 temperature and humidity meter measures the humidity range of 0-100%RH, and the accuracy is ±3.0%RH (20% to 80%) ±4.0%RH (0% to 20%, 80% to 100%).
measurement The temperature is -20 to 60°C (-4 to 140°F), and the accuracy is ±1°C (0 to 45°C) ±1.5°C (-20 to 0°C, 45 to 60°C)..
【Excellent design】: Temperature humidity meter support data storage, can store 99 records storage capacity.
ergonomically designed protective leather case, fast response capacitive sensor, with an openable protective cover, you can use it with one hand.
and has data retention, Automatic shutdown and low battery indication, maximum value and other numerical indications, higher performance!.
【LCD backlight display】: The LCD display has a backlight with a high-precision sensor. The LCD is brighter in a darker place, and the power is automatically turned off after 15 seconds to save power..
【Wide range of applications】: The digital hygrometer is suitable for offices, libraries, and cinemas. It is widely used in HVAC, in....
Accu-Chek FastClix Lancets for Diabetic Blood Glucose Testing Pack of 102
Reduce the pain and hassle of blood glucose testing with convenient pre-loaded lancets.
Use with the FastClix lancing device to collect a small blood....
Easy-to-use sterile lancets feature a thin gauge and bevel cut to ensure smoother entry and less skin tearing to reduce discomfort while testing your....
With 11 depth settings and precision guided technology to minimize side-to-side motion, the Accu-Chek lancing system makes testing easier and more....
Compatible with the Accu-Chek FastClix lancing device, not compatible with any other lancing devices.
For over 40 years, Accu-Chek has been a leader in providing convenient and accurate diabetic management supplies.
350 LEGEND: Use to check headspace of 350 Legend..
RIMLESS CARTRIDGE HEADSPACE: The proper use of Headspace Gages is the most reliable way to test rifle chamber length. Headspace in a rimless cartridge is the distance between the bolt face and a datum line, determined by SAAMI, where the front of the cartridge rests on its shoulder when the bolt is closed..
NO-GO: Corresponds to the maximum headspace we recommend for gunsmiths’ chambering new bolt-action rifles. This is not a SAAMI-maximum measurement. If a rifle closes on a NO-GO gage, it may still be within SAAMI specifications, or it may have excessive headspace. To determine if there is excessive headspace, the chamber should then be checked with a FIELD gage. The NO-GO gage is a valuable tool for gunsmiths’ reaming new chambers, in order to ensure tight and accurate headspace.
PRECISION MACHINED: Manufactured from top-quality, hardened steel and precision ground to ANSI and SAAMI tolerances. Headspace tolerance ground to a very exacting ±.00015. Each Headspace Gage thoroughly inspected with NIST-certified measurement tools to ensure the highest quality product..
MEASURING MEANINGFUL HEADSPACE: Properly speaking, and for safety purposes, one measures “headspace” as the difference betwee....
NO-GO: Corresponds to the maximum headspace we recommend for gunsmiths’ chambering new bolt-action rifles. This is not a SAAMI-maximum measurement. If a rifle closes on a NO-GO gage, it may still be within SAAMI specifications, or it may have excessive headspace. To determine if there is excessive headspace, the chamber should then be checked with a FIELD gage. The NO-GO gage is a valuable tool for gunsmiths’ reaming new chambers, in order to ensure tight and accurate headspace..
Telescoping Gauge Gage Set Tools 6 Pcs 5/16'' - 6'' Range Micrometer Precision T-Bore Hole Gauge
Multispecification measurement range, 6 piece Telescoping Gage Set, can detect hole (or slot) ID 5/16 "-6"(8mm-150mm).
Telescoping Gage Set INCLUBE:A - 8 To 12.7 mm 5/16 "To 1/2".
The Telescoping Gage Set is a stainless steel material that prevents rust and extends the life of the Telescoping Gage Set, a satin chrome plated surface that includes the case, contact points of hardened tool steel, Telescoping spring, with a knurled locking knob and a knurled holding area..
Easy-to-adjust to allow the most pinhole gauge on the retractable gauge to enter, groove and groove up to 6 inches deep..
NO-GO: Corresponds to the maximum headspace we recommend for gunsmiths’ chambering new bolt-action rifles. This is not a SAAMI-maximum measurement..
If a rifle closes on a NO-GO gage, it may still be within SAAMI specifications, or it may have excessive headspace. To determine if there is excessive headspace, the chamber should then be checked with a FIELD gage. The NO-GO gage is a valuable tool for gunsmiths’ reaming new chambers, in order to ensure tight and accurate headspace..