COMPATIBILITY: The Mite-R-Slide II will fit the JessEm’s Mast-R-Fence II Router Fence and TA Fence.
HOW DOES IT WORK: It slides onto the T-slot on the top of the fence which makes set up of the Mite-R-Slide II quick and easy. When you are done with....
PRECISION MADE GUAGE: The Mite-R-Slide II Gauge is rotatable 45 degrees to the left. Depending on your project, set the desired angle on the slider....
FOUR ACETAL ROLLERS: Four Acetal rollers, each with its own bearings, and each turning on a specially machined stainless steel roller pivot all....
GUARD ASSEMBLY: In addition, the Mite-R-Slide II has been equipped with a clear guard mounted to a swing assembly that enables the guard to move with....
EilxMag DOT Air Line Fittings Assortment, 44 Pcs Push to Connect Fittings NPT Male Thread & DOT Brass Air Brake Line Fittings Kit
【Premium Material】: Our air line fittings are made of PBT Plastic, the air brake brass fittings DOT approved are made of high quality CA360 brass, with corrosion resistance, high temperature ductility and low permeability. Great for long time use..
【Quantity】: Unique dot air line quick connect fittings nylon tubing kit: The plastic tube fittings contain 28 pieces: 8 pcs Male straight push connectors, 6 pcs Straight tube unions. 6 pcs 90 degree Elbows. 4 pcs 90 degree Elbows NPT thread. 4 pcs Tube tees. The brass tube fittings contain 16 pieces: 5 pcs Male connectors. 5 pcs Male 90° elbows. 3 pcs Tube tees. 3 pcs Tube unions. Fit type: 1/2", 3/8", 1/4"..
【Typical Application】: The push-to-connect fitting 1/4 inch are suitable for PU / PA / PE / PVC. The dot air fittings assortment can be used with air systems, and copper tubing in air brake systems. They are widely applied in automotive, manufacturing production lines, car or truck repair, industrial workshops, daily garden or lawn mower repair, towing machine hose connections and so on..
2-in-1 Drip Irrigation Tubing Hole Punch & Fitting Insertion Tool Kit for Easier 1/4' Inch Fitting & Emitter Insertion Drip Sprinkler Systems (Blue)
2-In-1 Punch and Fitting Insert: The drip irrigation hole punch tool is designed to fit for drip tubing punch and 1/4 fitting insertion use.
Hold the handle of the drip irrigation tubing punch and clamp the tube, gently press it until the tube is pierced.
The hole size is 4 mm/ 0.12 inch to ensure the proper insertion of the connector, fitting and emitter, making the installation more closely fitting..
Quality Material: Punch tools are maded made of high-quality plastic and metal, strong and durable, and the puncher has been polished so it will not become dull And can be used for a long time..
Application: This 2-in-one drip irrigation tubing hole punch & fitting insertion tool can be used to puncture holes when installing drippers and micro-sprinklers in polyethylene tubing..
Easy to Use: Simply press the tool through the tubing and then remove the punch tool with a pre-punched hole left.
Insert the fitting into the tubing, then slide the tubing according to the slot and push the fitting into pre-cut hole..
Humanized Design: The smartly designed fitting insertion tool will make you feel untired even after using it for a long time.
It can help you drill easily and fast and save time and energy for you.
The combination of blue and black color makes the dr....
Size and Number of Pieces: 1/4" 10pcs 3/8" 10pcs 1/2" 10pcs Tube OD.
Working Pressure Range: Maximum up to 150PSl. Working Temperature Range: '-40℉ to +200℉(-40℃ to +93℃).
Applications: Used with SAE J844 Type A and Type B nylon tubing in air brake system, or in cab air controls, except for where temperature is under -40℉(-40℃) or above +200℉(+93℃)or where battery acid can drip on tubing..
Advantages: Meet D.O.T.FMVSS 571.106 air brake specifications. Meet functional requirements of the SAE 246 & SAE J1131. Machined from CA360 brass. Easy to assemble (no tube preparation or flaring required.) Built in tube support. Can be used with copper tubing by NTA body with long nut and spherical sleeve. Insert should be removed.
Assembly Instructions: 1. Cut tubing as flat as you can. Maximum 15°angle is allowed. 2.Check the port of the mating part free of burrs or debris. 3.Slide sleeve and then nut on the tubing. 4. Insert the preassembled fitting into the tubing and the tubing should be bottomed to the seat of the fitting. 5. Tighten the nut by wrench until one thread remains visible of the fitting body..
Yeswelder Argon/CO2 Mig Tig Flow Meter Gas Regulator Gauge Welding Weld
Wide Application:Has CGA - 580 Tank fitting so it will screw right into the Argon, Argon/CO2Tanks. Ideal choice for MIG TIG welding, chemical and electronics industry.
Accurate Gas Flow Gague:The Square flow tube reads from 0 - 60 CFH, which is indicated by a ball which moves up and down in the flow tube.And has large 1 1/2" diameter pressure gauge which reads from 0 - 4000 PSI. Easy to read, accurate.
Multiple Outlet:Will fit both the female 9/16" x 18 nut or the male 5/8" x 18 fitting. It also comes with a standard 1/4" barbed fitting.
Design:Combination of regulator and flow meter.
Two Connection Ways:You can choose the connection method according to your needs.