Best Acme Screw Jack

ROGTZ Electric Car Jack kit 5 Ton 12V Car Jack Hydraulic Jack with Impact Wrench and Tire Inflator Pump, Car Lift Floor Jack for SUV Sedans Tire Change with LED Light (Black)

  • ...max height(lifting height range:6.1~17.7 inch) .The inflator pump in storage box takes 2 min for inflating(35L/Min) the replaced tire.Build-in warning flash light and LED light enables operation at night,no need to buy additional lighting tools..
  • √Usage electric impact wrench NOTES: One:2 sleeves are available for screws of 4 sizes, pay attention to the sizes when selecting the sleeve.
  • Two: The left side of the power switch marked "II", means loosening the screw. Press "II" and keep holding until the screw has been loosened, remove the nuts.The right side mark "I", means tightening the screw.Same way, keep the "I" side pressed until the screw has been tightened.
  • √SAFE AND SECURE TO USE:Our electric hydraulic jackis will automatically stop working after reaching the height limit.The jack head uses a non-slip design:a cross-shaped groove plus particles protruding from the surface to increase friction.The self-locking fully enclosed design,completely waterproof,no oil leakage,to ensure safety during use..
  • √MATCH MOST VEHICLES:The electric jack kit 's two-way power supply (battery clip with 12V DC power socket or car cigarette lighter) allows any adult to change and repair tires at any time on the garage/highway,best choice for your car, truck or SUV.....
Check Stock

HAPPYGRILL Fruit Wine Press, 1.6 Gallon/6 Liter Solid Heavy Duty Wood Basket, Apple Grape crusher, Juice Cider Wine Press (Multi)

  • Heavy duty T-handle turns large-diameter Acme screw & creates high pressure with little effort.
  • Frame yoke tips to back easily for easy basket access.
Check Stock

OMT Spring Compressor 11-1/2 Macpherson Strut Spring Compressor 13/16 Socket 1/2 Drive to Compress The Coil Spring Set of 2

  • ...nch or socket and allows a 1/2-inch extension for adjustment if the strut is too close to the tool, 11.5-inches threaded rods for 10-inches to 10.5-inches maximum opening to fit jaws to coils (Wide jaws with standard diameter of approximately 6 inches OD front coil springs)..
  • Constructed with forged hooks and center screw hardened for maximum strength and longevity, designed to withstand extreme pressure in any environment, ideal for professional mechanic and automotive repair novice..
  • 1-YEAR WARRANTY: Orion Motor Tech backs these spring compressors with a generous 1-year warranty as well as our usual friendly 24/7 customer service, ensuring that you'll enjoy their use for years to come!.
Check Stock

Moose Toys Space Jam: A New Legacy - Baller Action Figure - Bugs Bunny with Acme Blaster 3000

  • Bring all the on-court action from Space Jam: A New Legacy into your home with Space Jam Baller Figures..
  • Action Figure with Articulated head, shoulders and waist..
  • Each Baller Figure comes with an ACME inspired accessory with a Space Jam twist..
  • Load and launch missiles with the ACME Blaster 3000!.
  • Collect all the other Space Jam: A New Legacy Baller Figures..
Check Stock

YOST Vises 750-DI Multi-Jaw Rotating Combination Bench & Pipe Vise with Swivel Base

  • Extreme-Duty Casting Clamp force: 13,400 lbs. and Torque rating: 316 Ft-Lb.
  • Made from heavy duty 65, 000 PSI Ductile Iron castings, 3x stronger than cast iron vises.
  • Jaw Width: 5" (12.7CM) x Jaw Opening: 5" (12.7CM) x Throat Depth: 4" (10.2CM) x Pipe Capacity: 0.125”D x 3.5"D (0.32CM x 8.9CM).
  • Vise head rotates 360° with respect to the vertical, locking at every 30° or (12) twelve different locking positions and equipped with a large 3.5" x 2.7" (8.9CM X 6.9CM) anvil work surface.
  • 360-degree interlocking (geared) swivel base with (2) lock downs adjusts the direction of the jaws for proper placement.No-pinch main screw handle.
  • Machined Q235 steel main screw 0. 75"D with rolled single acme threads at 4 threads per inch.
  • Replaceable Hardened Steel Serrated (Top) Jaws and EXCLUSIVE SELF-ALIGNING Pipe Jaws.
  • 0.51"D x 9. 5" (1.3CM x 24.1CM) Long handle with rubber bumpers.
  • Base mounting tabs: (4) x 9/16"D (14MM), mounting hardware not included..
Check Stock

Moose Toys Space Jam: A New Legacy - Baller Action Figure - 5\ Lebron James with Acme Rocket Pack 4000

  • Bring all the on-court action from Space Jam: A New Legacy into your home with Space Jam Baller Figures..
  • 5" Action Figure with Articulated head, arms and legs..
  • Each Baller Figure comes with an ACME inspired accessory with a Space Jam twist..
  • LeBron comes with an attachable ACME Rocket Pack and Basketball accessory..
  • The ACME Rocket Pack 4000 launches missiles..
  • Collect all the other Space Jam: A New Legacy Baller Figures..
Check Stock

SQUEEZE master Fruit Grape Wine Classic Crusher -7 Litre/1.8Gallon with Hydraulic Fruit Wine Apple Press -5.3Gallon/20L

  • Double-tub action for grinder and pressing at the same time!.
  • Features Apple Eater Grinder-- chews up apples for easy pressing.
  • MEGA KIT includes the Happy Valley Ranch American Harvester Press & Grinder, Complete Motor Kit, Retractable Wheel Kit, Petro-Gel lubricant, 1 Quart of EZ- DO wood preparation and 4 pressing bags!.
Check Stock

K Tool International 22 Ton Blue Air Hydraulic Truck Jack Welded Pump Wiper Seal on Ram 3 Adaptors Air Pressure 100-120 PSI KTI63197

  • [22-TON CAPACITY] - K tool International hydraulic jack rated to lift up to 22 tons or 44,000 lbs..
  • [TRUCK JACK SPECS] - Minimum Height: 8 2/3".
  • [WIPER SEAL] - Wiper seal on the ram for longer life in extreme environments.
  • [RELEASE KNOB] - Release Knob At the Top of the T Handle Works At Any Handle Position. 3 handle positions allows for easy storage and jack positioning.
  • [STRONG/DURABLE] - Heavy duty truck jack has a welded pump and reservoir for added strength and durability. Heat treated extension screw for extra....
Check Stock

One (1) Pair BESSEY 60\ Heavy-Duty IBeam Bar Clamps for Woodworking

  • One (1) pair of IBEAM60 clamps that provide 60" of clamping width..
  • All lengths of Bessey IBeam clamps provide up to 7000 lbs. of clamping force and include the following standard specifications: 2" throat depth.
  • Steel, nickel-plated IBeam design provides exceptional strength over large distances without bending or twisting..
  • Cast iron sliding clamp jaw contains 5 clutch plates that allow it to move smoothly along the rail, while still holding its position under pressure..
  • Fixed end jaw has a 3/4" acme-threaded screw and large, easy-to-grip handle for quickly setting the clamp jaws while providing control over the pressure being applied..
Check Stock

One (1) Pair BESSEY 48\ Heavy-Duty IBeam Bar Clamps for Woodworking

  • One (1) pair of IBEAM48 clamps that provide 48" of clamping width..
  • All lengths of Bessey IBeam clamps provide up to 7000 lbs. of clamping force and include the following standard specifications: 2" throat depth.
  • Steel, nickel-plated IBeam design provides exceptional strength over large distances without bending or twisting..
  • Cast iron sliding clamp jaw contains 5 clutch plates that allow it to move smoothly along the rail, while still holding its position under pressure..
  • Fixed end jaw has a 3/4" acme-threaded screw and large, easy-to-grip handle for quickly setting the clamp jaws while providing control over the pressure being applied..
Check Stock