This is the "momentary" variety of the touch sensor - touch and it turns on, release and it turns off..
Positive and negative can be used as a touch surface,can replace the traditional touch button..
Four M2 screws positioning holes for easy installation.Module can be installed in such as surface plastic, glass of non-metallic materials..
In addition to the thin paper ( non-metallic ) covering the surface of the module , as long as the correct location of the touch , you can make hidden in the walls, desktops and other parts of buttons..
The module is based on a touch-sensing IC (TTP223B) capacitive touch switch module. In the normal state, the module output low, low power consumption.
When a finger touches the corresponding position, the module output high, if not touched for 12 seconds, switch to low-power mode..
XTOOL X100 PAD 3 Advanced Key Fob Programming Tool with KC100 Key Chip Programmer + EEPROM Adapter, Bi-Directional Control & 31+ Services, OE All Systems Diagnostic, 2 Years Update
【2023 Newest Comprehensive Key Programmer】X100PAD3 performs various IMMO functions like Read pin-code, Generate key, Make dealer key, All key l0st( Read PIN/CS), Immobilizer data reading & writing, Backup IMMO data, Add new key fob, Remote learning, Immobilizer module replacement, IMMO ECU reset & coding, Key Matching/Learning, smart keys reading, EEPROM Read & Write and backup the EEPROM chip inside the immobilizer module. Please confirm with us compatibility first with your car VIN..
【KC100 Key Chip Programmer & EEPROM Adapter Add on】Equipped with KC100 key programmer and EEPROM Adapter, X100 PAD 3 Professional scan tool can not only make key chip programming for VW Group 4th/5th immobilizer and BMW CAS1-3/CAS4 immobilizer, but also allows you to read, write and backup the EEPROM chip inside the immobilizer module. Through this adapter you can get access to the IMMO data, pin code and mileage information..
【Bi-Directional Control & Active Test Capability】XTOOL X100 PAD3 features full-featured bi-directional control ability to verify system input/output by sending commands to vehicle’s systems/components. Such as compression test, EVAP test, turn on/off radiator fan, A/C Clutch On/Off, Fuel Pump, Window/Mirror/Door Lock Test, Pump&Value ....
Versatile split design great for typing and gaming: move the right module out of the way and bring your mouse in close for improved endurance and more precise aim (eSports proven). Rotate the left module for optimal key coverage or to squeeze into a tight space at a LAN. Or split the modules up to 20 inches and put your stream mic, HOTAS, or mouse in the middle for easy access. Separate the modules to shoulder-width for an ergonomic typing posture and add the lift kit tenting accessory to reduce forearm strain. The detachable Palm Supports now include all-new thick cushioned palm pads for even more comfort..
100% Mechanical switches for maximum performance: genuine Cherry MX Blue mechanical switches (clicky, tactile feedback) offer professional-grade responsiveness and unmatched durability (50M clicks). Choose the switch that's right for you..
Immersive RGB lighting for a signature look: 16.8M Color per-key RGB Backlighting with 10 customizable effects like wave, spectrum, rebound, pulse, rain and much more. Install lighting expansion pack 1 to add Dual layer lighting and two-tone effects..
All 95 keys are fully programmable for complete customization: Use the dedicated SmartSet key for convenient on-the-fly Remaps and macros, or use the all-new SmartSe....
... brackets sold separately). Overall TV speaker dimensions are 2.21" H x 23.38" W x 4.02" D..
Remote control: Compact TV speaker comes with a remote control that enables a dialogue mode to further enhance speech or add a bass boost for more depth..
Build and expand: The Bose TV Speaker is compatible with the Bose Bass Module 500 or 700 and requires the Bose Bass Module Connection Cable or a standard 3.5 millimeter audio cable, sold separately..
1200W High Power DC to DC Boost Converter, PEMENOL DC 10-36V to 12-80V Boost Module Step-up Transformer, Adjustable Charging Power Supply for Electric Vehicles and Solar Power
★High Power DC to DC Boost Converter: This module with a function of constant voltage and constant current. It can be used to provide charge for electronic devices. Suitable for voltage stabilization of solar panels, charging of batteries, lithium batteries, etc.
★Wide Input Voltage and Output Voltage: Input voltage: 10-36V.
output voltage:12-80V. The output current can be adjusted(Max 20A). ultra-low input and output voltage difference. When the current > 18A, please strengthen the heat dissipation.
★With Overcurrent and Short Circuit Protection : Double short-circuit protection (input 20A fuse).
with output anti-reverse flood protection, no need to add anti-reverse diode when charging.Note: There is no reverse connection protection, if you have this need, please connect a diode in series with the input.
★Large Heat Sink: Large heat sink design (85mm*62mm*64mm), and it has been processed with black oxidation (black oxidation has better heat dissipation). Which can prolong the service life of the module and make the conversion efficiency of the module higher.
★Widely Application: High-power LED constant current drive, Lithium battery charging, Ni-Cd or Ni-MH battery charging, Solar panels, Wind Turbines, and so on.
Weewooday Recordable Sound Module for DIY Audio Cards Push Button Activated 120 Seconds Recording Recordable Sound Chip for Valentine Creative Music Personal Voice Card Easy to Record
Versatile applications: the sound module can record from video, sound files, audio recordings, phone messages, movie sounds, etc..
This recordable module is suitable for any device, which will bring you a lot of convenience.
120 Seconds records: our push button sound recorder can hold up to approximately 120 seconds of recording, you can use this button module to make a musical card for your loved one. There is self-adhesive on the back of the sound module, which is easy to paste on the card/box.
Steps to use: first, remove the yellow paper and plug one end of the double-sided audio adapter into the sound module and the other end into a device such as a mobile phone. Move the white button to the far left and play the audio on the device to start recording. After recording, move the white button to the far right to play the recording. Place the yellow paper under your tongue to stop the playing. Remove the yellow paper and it will play again. It can be re-recorded multiple times.
Useful combinations: including a sound module and a double-sided audio adapter, the recordable sound chip measures about 5.3 x 2 inch, the audio adapter measures about 50 cm/ 19.6 inches in length, appropriate for you to use.
Fun to DIY: it is an ideal choice for you to use this ....
DC Audio LVL3-M2 12' Level 3 900W/1800W Dual-2-Ohm Car Audio Subwoofer/Sub
Parameters: DROK audio amplifier board working voltage is DC 8-26V, can be powered by 12V, 24V.
output power is 15W stereo (24V 8ohm)/ 10W stereo (12V 8 ohm), if connect 4 ohm or 2 ohm speaker, the power will be automatically limited to 15W..
Artificial Material: this New-designed stereo amplifier module is made of noble black immersion gold circuit board, PAM8620 chip, imported KEMET speaker capacitor, large-capacity filter capacitor for channels. Besides, we customized black copper terminal blocks and gold-plated audio input terminal blocks for this new amplifier module..
High Performance: the class D power amp module is with high efficiency of over 90%, general harmonic distortion noise is less than 0.2%, low quiescent current and noise suppression..
Safe Protection: the 2 channel amp board is designed with input reverse connection protection, short circuit protection, over heat protection, overcurrent protection, overvoltage protection, undervoltage protection.
Additional Function: it is available to connect external mute function (MUTE: High level mute, factory default low level).
available to add an external Shutdown (SD: the chip will be Shutdown at low electricity level, factory defaults high electricity leve....
DROK DC 24V to 12V CC CV Step Down Volts Regulator Constant Current Voltage 8A DC Adjustable Buck Converter 7-40V to 1.2-35V LED Driver Charger Module with Charging Indicator Solar Power Supply DIY
Module Properties: non-isolated step-down constant current , constant voltage module (CC CV) charging module.
Output voltage :DC 1.2-35V continuously adjustable.
Output Current: 8A ( when power tube's temperature exceeds 65 degrees, please add cooling fan ).
With 4 to 22 stations, the ESP-ME3 provides the station count options customers need. Install the same controller on residential and light commercial sites. Add station modules when expanding irrigation without removing or even powering down the controller..
Upgrade the ESP-ME3 to a SMART controller by adding the LNK WiFi module and a WR2 rain sensor. The LNK makes programming and monitoring easy through the enhanced Rain Bird app..
Configurable to 22 stations with additional 3 or 6 station modules for different sized jobs or future irrigation needs. Comes with power plug and outdoor cabinet for indoor or outdoor installation..
Be alerted of system issues including electrical, programming, or high flow (when using a flow sensor) through a red LED and scrolling messages coupled with mobile device alerts when used with the LNK WiFi Module and the Rain Bird app..
Large text and symbols make the color-coded dial positions easy to understand. Large 3” back-lit screen is clear to read in dark garages or sheds..
