Student Geometry Math Set Drawing Compass and 6 Inch Plastic Clear Swing Arm Protractors 180 Degree Math Protractor
Wide application: 2 Piece math set are great for drawing circle and measuring angle, good for students, teachers, engineers, designers, artists, etc..
2 Diverse tips Design compass:Stainless steel compass,solid and durable.
The opposite side of the pencil end is an adjustable separated jaw which allows you to fix the ink or paint..
Integrated compass package: Compass comes with a clear box, contain 1 piece geometry compass and 1 box refill packaged in a transparent box, convenient for organized and carry..
6 Inch protractor: Made of plastic, inch marks is up to 6 inch, centimeter marks is up to 10 cm.
Range of 0 to 180 degrees, and clear color allow you see the words, letters, figures on page through the protractor, it makes measuring easy..
Notice: If you receive the product and found the screw of compass is loose, do not worry, it is not a quality problem.
The loose screw makes it easier for you to turn the pencil lead down.
You can tighten the screw after using pencil lead replace divider part..
Johnson Level & Tool RAS-120 Aluminum Rafter Square w/Manual, 12
RAFTER ANGLE SQUARE: Johnson Rafter Tool gets the job done easily and accurately with a strong aluminum body featuring CNC machined edges. This versatile tool is perfect for professional builders and contractors..
POWDER-COATED FINISH: This rafter square & protractor features permanently etched graduations and numbers that are easy-to-read due to the low-glare, protective powder-coated finish..
ACCURATE MEASUREMENTS: This square layout tool has scribe notches beginning at 1-3/4" that are excellent for transferring outer increments from the pivot point, as well as convenient markings that measure 24 board dimensions of 1-1/2", 3", and 3-1/2"..
APPLICATION RANGE: The thick edge of this angle square is perfect as a saw guide for cross-cuts or angled cuts utilizing the engraved protractor scale. It can also be utilized indirectly, by scribing notches to form a saw cut line for rip cuts..
SIMPLIFIES STAIR LAYOUT: This 12" triangle square integrated distance and angle scale allows you to draw your cut lines on your stringers quickly and precisely. This rafter square contains scales for cutting hip, valley, and jack rafters..
Woodworking Edge Ruler, 0-70 Degrees Adjustable Protractor ,Multifunctional Construction Ruler, Angle Measuring Ruler,Thickness 1.5mm Approximately .(20in)
Ruler thickness 1.5mm approximately, much stronger than others(0.8mm typically).The ruler dial is made of plastic with good hardness. it has a long service life..
woodworking ruler is a multifunctional device for length measurement and angle drawing.this tool for every woodworkers and mechanics..
The protractor can be adjustable from 0 degree to 70 degrees and firmly locked every 5 degrees..
Loosen the nut first , adjust it to a suitable angle , and then tighten the nut to fix it at this angle . Pick up the stroke line , and then go to the next step ..
Each woodworking ruler is equipped with a wall-mounted storage rack, which make it easy to store..
Precise and Accurate - The 505P-7 is a 175mm (7") Plastic Saw Miter Protractor that is made from a durable hardened plastic that has markings which provide accurate angle calculations for transferring and making cuts with the utmost precision..
Easy To Use - Starrett protractors are an easy-to-use cutting guide for carpenters, plumbing, builders, and any DIY home improvement jobs. They have two laser engraved scales and a smooth pivot assembly for precise operation..
Miter Cut & Single Cut Transfers - Our protractors offer miter cut scale transfer readings which go directly to the miter saw for miter joints and single cut scale transfers readings for butt joints..
Everything You Need - Cut down your work time and reduce waste by using Starrett's top of the line protractor. It's durable scratch resistant design is ideal for any workplace and construction job..
Measure Right The First Time - Our protractors will simply set your saw to the right angle. Upside down or backward, rest assured that you will always get the correct reading..
Bnlcd Miter Saw Protractor, 7.3-Inch Aluminum Protractor Angle Finder Featuring Precision Laser Engraved Scales, Woodworking Angle Measuring Tool with 360 Degree Rotation Function
【MITER CUT & SINGLE CUT】This professional miter protractor has two scales to measure angles. One for a single cut which use the ourside scale, where only one piece of material is cut, and another one which use the inner scale, when two pieces of material need to be lined up/match.
【CUTTING GUIDE TOOL】Doing angle measuring first, then set the angle on your miter saw or table saw without conversion required, smarter and friendly for baseboard trimming work.
【LENGTH MEASUREMENT】INCH/CM 2 type of scales for length measurement suitable for different scenarios.
【MITER ANGLE FINDER】It's also equip with high precision level gauge design for simple tasks of level measuring, And measuring arm can 360° rotate freely without any dead angles.
【DURABLE CORNER ANGLE FINDER TOOL】D DUSSAL bevel protractor is made from high-quality ABS plastic and it's resistant to scratch and very durable without worrying about rust and deformation, well installed keep it will not loose and shake durring.
GemRed Digital Angle Finder Tool, 2 in 1 Angle Gauge, Stainless Steel 7inch/200mm Digital Protractor for Woodworking/Carpenter/Construction/DIY Tools (Battery Included) …
... and length again with one convenient tool. ☆The angle gauge with large LCD display, read clearly. ☆Also easily operate with only 2 bottons.(The red and white buttons make the function distinction clearer and more convenient.).
【Humanized Detail Design】 ☆Locking Function: For read it easily, GemRed digital protractor could be locked at any angle. ☆Specially treated matte stainless steel ruler body: The ruler body does not reflect light, each Angle can be clear reading ☆Bigger and bolder type of the ruler: Sharper reading..
【Durable & Long Battery Life】 This digital protractor has been adopted high quality stainless steel ensures the durability of the product. Large capacity standby with automatic power-off function can work more than 2000 hours, saving power consumption and extending battery life..
【Note & Waranty 】 Stainless steel edge is sharp, please be cautious while using AND KEEP IT AWAY FROM CHILDREN.*SCRATCHES ON RULERS ARE RESULTED FROM TOUCHING WITH EACH OTHER. IT MAY APPREAR ON BRAND-NEW PRODUCT. We provides high-quality services with a 12-month warranty..
MulWark 26ft Measuring Tape Measure by Imperial Inch Metric Scale with Both-Side Metal Blade,Magnetic Tip Hook and Shock Absorbent Case-for Construction,Contractor,Carpenter,Architect,Woodworking
【Patented measuring technology】Ruler and protractor combination for easy measuring inside and outside angles. 【Digital Display】Easy to read..
【Durable Rulers】Well-made stainless steel rulers and laser etched measurements offer clear reading and years' usage..
【High Accuracy】Accuracy of this protractor is ±0.3 degree. It is a good choice for most projects like woodworking, crown molding and daily use. Folded length: about 7.5 inch/220mm.Total length 400mm..
【Locking Function】For read it easily, GemRed angle finder could be locked at any angle. *NO REVERSE ANGLE/DISPLAY FUNCTION..
Miter Saw Protractor Replace the Model #505P-7,Miter Angle Finder with Laser Dial for Carpenters, Plumbers and All Building Trades Also Invaluable for Home Use and Do-It-Yourselfers.
Wide Application: Miter saw protractor #505P-7 replacement widely use in woodworking, plumbers, and all building trades..
Laser Dial:Laser carving dial, accurate and clearly Dial, easy to read, use velvet bag packaging, well protect the dial..
7.3 Inch Miter saw protractor, you can put it in the bag or pocket, easy to carry..
360-Degree Measurement:360 - degree rotation can measure different angles.Inside & Outside miter angle finder..
Simple Operation: Direct read, setting the cut saw angle.But It's not an instrument that measures the angle of bending, it just helps you cut some standard angles..
Saker Miter Saw Protractor|7-Inch Aluminum Protractor Angle Finder Featuring Precision Laser-Inside & Outside Miter Angle Finder for Carpenters, Plumbers and All Building Trades (Black)
⭕【ACCURATE】：Features easy-to-read precision laser engraved scales, protractor allows direct angle reading to the miter saw. Perfect for crown molding, trim work, and a variety of other carpentry applications..
⭕【“O” BODY DESIGN】：Saker Miter Saw Protractor is of “O” shape design during operation and ensures smooth & precise read on inside/outside corners, Crafted from precision CNC-machined aluminum alloy..
⭕【EASY TO CARRY 】：Saker Miter Saw Protractor is made of lightweight aluminum alloy, which has great corrosion and wear resistance, extending the lifespan. Also, its small size and lightweight material makes it easy to carry..
⭕【WIDE APPLICATION 】： Whether you are a professional or not, Saker Miter Saw Protractor is excellent for you. It is suitable for crown molding, miter cuts, carpentry, plumbing, metalworking and more..
⭕【Service】We Are Confident In the Quality of the Product. In the Process of Daily Use, If the Product Has Quality Problems or Have any Questions About the Product, Please Feel Free To Contact Us, We Are Always There..
