Best Adjustable Dc Power Supply

CRJ DC Power Supply for 2 x 3/4-Pin 12V Computer PC Case Fans

  • DC Power Supply and Adapter Cable Allows You to Power Two Computer Case Fans.
  • Cable Is Compatible with Both 3-Pin and 4-Pin PWM PC Fans.
  • Fans Will Be Operated at Full Power from the DC 12V 1A Power Supply.
  • Additional Fan Splitter Cables Can Be Used To Expand Your Fan Configuration (Within The Curent Capacity Of the 1A Power Supply).
  • Female DC 5.5 x 2.1mm Adapter Cable Allows You The Flexibility To Use Other Power Supplies To Better Suit Your Needs.
Check Stock

HiFi 25W DC Linear Power Supply 5.1V 3.5A, Audiophile Regulated Converter Adapter, Upgrade for Raspberry pi 4 Model B -Solupeak

  • Stable DC bench linear regulated power supply Compatible with Raspberry Pi 4 Power Supply with ON/Off Switch.
  • Upgrade for RPi 4 Model B 1GB / 2GB / 4GB Version, Include Type-C cable.
  • 25VA power transformer, output DC 5.1Volt, current max 3.5A.
  • Desktop Power adapter Regulate,Ultra-Low Noise,provide clean DC power source.
  • USB+5.5/2.5mm DC port output,Note 5.5/2.5mm port should not be used with RPI 4 at the same time, overloading will damage the power supply.
Check Stock

Sundown Audio SAE-2000D V.3 Monoblock 2000W RMS Digital Class D Amplifier SAEv3-2000D

  • Features: Monoblock Class D Amplifier. Power Handling: Maximum Output Power at 14.4V DC 1-Ohm: 3000W RMS | Maximum Output Power at 14.4V DC 2-Ohm: 2025W RMS | Maximum Output Power at 14.4V DC 4-Ohm: 1140W RMS. Input Sensitivity: 200MV, Signal-to-Noise Ratio: 86dB, Frequency Response: 10Hz-20kHz (-3dB)..
  • Crossover: High Pass Filter: 15 to 80Hz (-12dB/8) Variable | Low Pass Filter: 80Hz to Full (-12dB/8) Variable. Bass Boost: 0 to 12dB (50Hz), Thermal Management: Smart Cooler (Fan Powered by Temperature or Audio with 3 Speeds), Input Impedance: 56K-Ohms, Protection System: Output Short/High/Low Supply Voltage/Thermal Protection, Minimum Supply Voltage: 9V DC, Maximum Supply Voltage: 16V DC, Dimensions: TBA..
Check Stock

DC Buck Converter, DROK DC to DC Step Down Power Supply Module 10V-65V to 0-60V 0-12A Adjustable Voltage Regulator Transformer Board with LED Display for Volt Reducer

  • 【Adjustable Output Voltage and Current】For DROK buck converter: Input voltage range is DC 10-65V.
  • Output voltage range is DC 0-60V, can be arbitrary adjustable and used to convert 24v to 12v 5v.
  • Output current range is 0-12A, can be arbitrary adjustable.
  • 【LED Display】This power supply module is designed with LED display, which can show real-time voltage, current, capacity and time..
  • 【Constant Current and Voltage with Indicator Lights】This volt transformer board can set constant output voltage and constant output current by the key buttons. Also, the module is equipped with working status indicator lights, which are output OUT, constant voltage CV and constant current CC respectively, so that the working status can be checked in real time..
  • 【Auto Output and Button Lock Mode】Automatic output can be set after power on. And The parameter adjustment button can be locked to prevent misoperation to adjust the output voltage and current parameters..
  • 【Cooling fan and cooling pad】This adjustable power supply converter is equipped with cooling fa....
Check Stock

Dasiter 600W High Power DC to DC Boost Converter DC 12-60V to 12-80V Boost Module Board Step-up Transformer

  • 【DC to DC Boost Converter】600W high power booster module, wide voltage input: 10V ~ 60V, 12V ~ 80V adjustable wide voltage output.
  • ultra-low input and output pressure difference..
  • 【DC to DC Boost Converter】Specifications: Radiator bottom plate thickness 5mm, tooth height 21mm, length 85mm, width 63mm, booster plate fixed above the radiator, rational design, integrated design of radiator and booster plate, convenient for users to use directly, use long screws fixed directly..
  • 【DC to DC Boost Converter】The module has a constant voltage and constant current function, but it is a non-isolated boost mode, due to its characteristics, the constant current range depends on the input and output voltage and load..
  • 【DC to DC Boost Converter】Please Power on the module first, then connect the load, which is especially important in high-power loads.
  • the input voltage should be stable, especially when some low-voltage (12V) input power supply is connected to the load voltage, it will fall below 10V, and it is easy to break down the power tube at this time..
  • 【DC to DC Boost Converter】Two or more modules can not be used in parallel input and output, otherwise the current limit function will be invalid.
Check Stock

Programmable DC Power Supply (0-30 V 0-10 A) HM310T High Precision 4-Digit Voltage Current Power Time Display Variable Switching Digital Power Supply with PC Software and USB Interface

  • [Programmable DC Power Supply]: This programmable DC power supply has a standard USB interface on the back and supports the Modbus programming instruction set. Hardware list With programmable sequence output. Six groups of quick parameter storage features..
  • [High accuracy]: The HANMATEK variable DC regulated power supply can display the output current, voltage, and power in 4 digits. At the same time, the time can be displayed and the decimal point is automatically rounded up. Output voltage: 0-30V, output current: 10A. Voltage resolution: 10mv.
  • [Reliability and Safety]: This variable DC regulated power supply has five powerful functions: overvoltage protection (OUP), overcurrent protection (OCP), overpower protection (OPP), overheat protection (OTP), and short-circuit protection. It has a protective function. With the automatic temperature control cooling fan, the cooling fan turns on automatically when the operating temperature exceeds 45 ° C..
  • [Multi-function]: Front 5V 1.5A dual USB charging interface that can be charged and repaired. The one-key output on / off switch allows you to preset the voltage and current values ​​when the output is off, which is convenient for operation. One key for the voltage stabilization a....
Check Stock

UpBright 12V AC Adapter Compatible with Dinair 874 Digital + Pro Compressor Airbrush Makeup 505 Mini 700 Basic Compressor 12 Volts DC .8 Amp KSAS0241200200D5 12VDC 2.0A DC12V 2A Power Supply Charger

  • World Wide Input Voltage 100-240VAC 50/60Hz. OVP, OCP, SCP Protection (OVP: Over Voltage output Protection. OCP: Over Current output Protection. SCP: Short Circuit output Protection). Tested Units. In Great Working Condition. UpBright 30 days money back guarantee. 1 full year service warranty..
  • UpBright New Global 12V AC / DC Adapter Compatible with Dinair Model 874 Digital + Pro Compressor Red Sparkle Digital + Pro Compressor Airbrush Makeup Systems, Inc. 12 Volts DC .8 Amp 12Volts 0.8 Amp 12 Volt DC 0.8Amp 12Volt DC 0.8 A 12VDC 800mA - 2000mA DC12V 0.8A - 2A 12.0V 800 mA 2000 mA 12.0VDC 2.0A 12 V 12.0 VDC Switching Class 2 Transformer Power Supply Cord Cable Battery Charger Mains PSU.
  • Compatible with: Dinair Model 505 Mini Compressor Airbrush Makeup Systems, Inc. 12Volts DC .8Amp Power Supply.
  • Dinair Model 700 - 12Volts DC, .8 Amp Airbrush Makeup Air Basic Compressor Power Supply.
  • Compatible with: Dinair Model: KSAS0241200200D5 12V 2.0A Power Supply.
Check Stock

GOKKO GKB-55 Extra Large Guitar Pedal Boards with Isolated Power Supply and DI Box, Aluminum Alloy Guitar Pedalboard 25.6' x 12', Come with Mounting Tape and Carry Bag

  • 1.Pedal board at the size of 25.6 x 12 x 2.6 inch offers large space to hold up a bunch of guitar effects pedals..
  • 2.Made of high quality Aluminum Alloy, which is solid to hold and protect the pedals nicely and durable to use..
  • 3.The pedal board is equipped with a completely independent power supply, which is more convenient to use, eliminating the trouble of carrying an additional power supply..
  • 4.Guitar power supply Specification:10 Isolated, 8 port DC 9V, 1 port DC 12V, 1 port DC 18V..
  • 5.Package include:1 x Pedal board with power supply,1 x Carrying bag,1 x Bag shoulder Strap,2 pairs 60 inches (150cm) Pedalboard Velcro,1 x Power Adapter,1 x Polarity Reversal cable,10 x DC Power Cable..
Check Stock

Printer s Devil Color Vinyl

  • [24v 2.5a 60w power supply adapter Input Voltage :] AC 100 - 240Vac 50/60Hz, Output Voltage: DC 24V, Max Current 2.5A, Max Wattage 60W..
  • [60W Power Supply Adapter Safe Switching:]Shortage Protection, Overload Protection, Over Voltage Protection. No need to worry about any fires....
  • [24v 2.5a power adapter Application: ](Should be 24V & not exceed 60W) LED Strip Lights, printer, LED display, speaker system, soundbar, humidifier,....
  • [24v power supply adapter How To Use]connect the power cord and the adapter, then connect the adapter with your device,very easy to use..
  • [24v 2.5a 60w power supply kit Package Include:] Length 1.2M/47.2IN US AC Power Cord*1, 24V 2500mA power adapter (with 1.2M DC cable and 5.5mm x 2.5mm....
Check Stock

Diitao 50W×2+100W Bluetooth Power Amplifier Board with Subwoofer 2.1 Channel, 12V-24V Audio Power Amplifier Module with Treble and Bass Control for DIY Bluetooth Audio ZK-MT21, Black

  • ...ZK-MT21 Power Amplifier Board】Uses Bluetooth 5.0, and its transmission distance can reach 49 feet (without obstruction). At the same time, this power amplifier board has a 3.5mm AUX audio input interface..
  • 【Specification】With 36*25*10mm heat sink, suitable for power supply DC12-24V/5A or above (24V battery pack cannot be connected), suitable for speakers 20~100W, 4~8Ω..
  • 【Protection Function】ZK-MT21 Bluetooth power amplifier board has multiple protection mechanisms to ensure its safe operation. It has short-circuit protection, over-current, over-heat, and anti-reverse protection..
  • 【Come With DC Conversion Plug】The DC adapters on the market (plug specification 5.5mm*2.1mm) basically can meet the needs of the ZK-MT21 Bluetooth power amplifier board. If your existing DC power plug is not 5.5mm*2.1mm, there is no The problem is because we have included a DC conversion plug in the product..
  • 【Tips】There will be enough output power only when the audio input is sufficient and the power supply voltage/current is sufficient.The higher the power supply voltage, the greater t....
Check Stock