Taytools 465494 Wheel Marking Gauge Depth Gauge with Solid Brass Machined Head Hardened .310 inch Diameter Beam Hardened High Speed Steel Cutting Wheel Overall Length 8 Inches Easy Read SAE and Metric
The 1-9/16 inch diameter by 1-3/16 inch tall head is precision machined from solid brass (not plated!). The ergonomic brass head fits perfectly in the hand providing precise control. The knurled thumb screw is also solid brass and securely locks the head to the beam holding measurements. The head has a countersink so the cutter can be fully retracted protecting it when not in use..
The wheel cutter is 7/16 inch in diameter. The cuter can be easily resharpened by rubbing the flat surface in any sharpening media. Replacement cutter are also available..
The hardened steel beam is .310 inches in diameter and 8 inches long. Maximum cutting depth of the gauge is a full 7 inches. The beam is black chrome plated to protect against corrosion and to allow easier reading of the mm and SAE graduations. Graduations allow easy setting of the gauge and extend to 150 mm or 6 inches..
Countersink Drill Bit Set (8 Piece Set - Carpenters Quality) Counter Sinker Set for Woodworking and Carpentry
8 PACK OF COUNTERSINK DRILL BITS - In the Following Sizes: 5/64 - #4, 3/32 - #6, 9/64 - #6, 7/64 - #8, 1/8 - #10, 9/64 - #10, 9/64 - #12.
CARPENTER GRADE PRECISION GROUNDED 82 DEGREE TIPS - Our Counter Sinker Bits Consist of 4 Incredibly Sharp Blades That Cut Into The Hardest Woods with Ease. 1/4" Hex Shaft That's Compatible with Most Drills & Impact Drivers.
ADJUSTABLE LENGTH - Easily Adjust the Overall Length of the Bit with 2 Allen Head (Hex) Screws. Hex Key Allen Wrench is Included With Every Purchase.
STORAGE CASE INCLUDED - Keeps Your Countersink Bits Organized and Safe in a Hard Shell Plastic Case.
LIFETIME GUARANTEE - Here at Owl Tools (USA Based Company) we only care about your satisfaction. We try our best to ensure each product is in perfect condition before you get it, but if something is not up to your satisfaction, please contact us for a full refund or replacement..
Chamfer End Mill 3 Flute Chamfering Router Bit 90° Tungsten Steel CNC Polishing Carving Tool for Small Cutting Amount(D3*90°*50L)
3 FLUTES: The chamfering knife is designed with 3 flutes, which can complete the operation of conical surface at one time, and is suitable for small cutting amount..
ONE-PIECE DESIGN: The unique one-piece design makes the debris generated during the cutting process easier to fall without clogging the tool..
EASY TO USE: The milling cutter bit dopts professional chamfer design, which can polish and engrave the workpiece without unloading..
STANDARD SIZE: The end mill chamfer bit has standard size and can be used as an aluminum‑copper milling cutter tool and an engraving milling cutter head..
APPLICATION: The chamfering tool is compact design, easy to carry and store, mainly used for 90° chamfering or taper hole processing on the workpiece..
29-Pack Woodworking Chamfer Drilling Tools WENHUALI 6 Countersink Drill Bits 7 Counter Sinker Drill Bit 8 Wood Plug Cutter 3 Step Drill Bits and 3 Countersink Drill Bit with 1pcs Center Punch.
.... Specification: 3/16''-1/2'', 1/4''-3/4'', 1/8''-1/2''. Suitable for drilling holes within 0.12 inch (Iron Plate, Copper Plate, Aluminum Plate).
within 0.2 inch (Wood, PVC sheet, Insulation Boards). Not recommend for hard and brittle materials such as stainless steel, glass, tile floors, walls etc..
7Pcs 3- Pointed Countersink Bit for Wood – Made of high carbon steel with high hardness & abrasion resistance, large chip flute and five edge chamfers can drain sawdust faster and easier(Size include: 3mm, 4mm, 5mm, 6mm, 7mm, 8mm, 10mm). With 1pc hex L-wrench, you could easily remove and adjust counter sleeve depth and drilling depth..
8Pcs 3/8" Shank Wood Plug Cutter Drill Bit Set – Made of durable carbon steel, it is used for tapered 1/4", 3/8", 1/2", 5/8" corks to cover recessed screw holes or hide imperfections.Could cut the plug 22mm/23mm/25mm/26mm in depth as well..
6Pcs 1/4" Hex Shank 5 Flute Countersink Drill Bit – Made of high speed steels, they're pectect for sinking 90° holes into Wood and PVC boards for ountersunk screws and fixings. 6 different diameter: 6mm(1/4"), 8mm(5/16"), 9mm(3/8"), 12mm(1/2"), 16mm(5/8"), 19mm(3/4")..
NEIKO 10218A Countersink Drill Bit Set for Wood and Metal, 1/4” Tri-Flat Shank, 5 Piece Countersink Bits, M2 High Speed Steel
PRECISION MACHINED TIPS: These countersink drill bits come with 1/4" tri-flat shanks with a precision-ground 82-degree tip for sinking holes into wood, machinable metals, mild steel, fiberglass plastic, and more and fit common handheld power drills..
M2 HSS MATERIAL: Each metal countersink bit is made of high quality M2 HSS material for extended drill bit life and efficiently drills countersinks to help create strong joints between screw and material..
FIVE-FLUTE DESIGN: Each of the 5 counter sink bits utilizes a five-flute design that reduces vibration for smoother drilling as found in woodworking with a 1/4-inch shank that allows easy gripping..
BIT HOLDER CASE INCLUDED: Each countersink drill bit set comes with an aluminum case for carrying and easy storage..
BIT SIZES: Each countersink tool set contains 1/4.
Countersink Drill Bit Set (8 Piece Set - New Version Tested by Carpenters!) Counter Sinker Set for Woodworking and Carpentry
8 PACK OF COUNTERSINK DRILL BITS - In the Following Sizes: 5/64 - #4, 3/32 - #6, 9/64 - #6, 7/64 - #8, 1/8 - #10, 9/64 - #10, 9/64 - #12.
CARPENTER GRADE PRECISION GROUNDED 82 DEGREE TIPS - Our Counter Sinker Bits Consist of 4 Incredibly Sharp Blades That Cut Into The Hardest Woods with Ease. 1/4" Hex Shaft That's Compatible with Most Drills & Impact Drivers.
ADJUSTABLE LENGTH - Easily Adjust the Overall Length of the Bit with 2 Allen Head (Hex) Screws. Hex Key Allen Wrench is Included With Every Purchase.
STORAGE CASE INCLUDED - Keeps Your Countersink Bits Organized and Safe in a Hard Shell Plastic Case.
LIFETIME GUARANTEE - Here at Owl Tools (USA Based Company) we only care about your satisfaction. We try our best to ensure each product is in perfect condition before you get it, but if something is not up to your satisfaction, please contact us for a full refund or replacement..
Wahl Professional - Taper 2000 Adjustable Cut Corded Electric Hair Clipper with Black Blade Attachment Guards for Smooth Haircutting for Professional Barbers and Stylists - Model 8472-850
PROFESSIONAL PRECISION: Wahls Professional Taper 2000 is a strong commercial grade adjustable corded clipper with a 1045-100 blade, meant for cutting....
STYLISH AND VERSATILE: Taper 2000 is lightweight, ergonomically designed, powered by an electromagnetic motor, and features a convenient adjustable....
ACCESSORIES INCLUDED: The Taper 2000 comes with all accessories required for use.
the clipper, 4 attachment comb cutting guides (1/8, 1/4",3/8",1/2"),....
PRODUCT SPECIFICATIONS: The Wahl Professional Taper 2000 corded electric hair clipper measures 6.25" long, weighs 1 pound, includes a 1045-100 blade,....
PLEASE NOTE: Due to continuous improvement, the product appearance may slightly vary from the images on this listing. Wahl Professional Products....
SHITIME 34 Pack Wood Working Chamfer Drilling Tools, 6 Countersink Drill Bit Set, 7 Counter Sinker Drill Bit Set, 8 Plug Cutters for Wood, 8 Drill Stop Bit Collar Set and 3 Step Drill Bits.
... integral set of wood working tools for professionals or beginners. Pecfect gift for fathers, friends, carpenter and DIY lovers. Ideal for wood, particle board, fiberboard, logs, plastic boards, PVC pipes used on hand drill, bench drill and electric drill..
7Pcs 3- Pointed Countersink Bit for Wood – Made of high carbon steel with high hardness & abrasion resistance, large chip flute and five edge chamfers can drain sawdust faster and easier(Size include: 3mm, 4mm, 5mm, 6mm, 7mm, 8mm, 10mm). With 2pc hex L-wrench, you could easily remove and adjust counter sleeve depth and drilling depth..
8Pcs 3/8" Shank Wood Plug Cutter Drill Bit Set – Made of durable carbon steel, it is used for tapered 1/4", 3/8", 1/2", 5/8" corks to cover recessed screw holes or hide imperfections.Could cut the plug 22mm/23mm/25mm/26mm in depth as well..
3 Pcs 1/4" Hex Shank HSS Step Drill Bit Set – With titanium coating, it has great heat/ corrosion/ rust resistance. Specification: 4-12mm / 4-20mm / 4-32mm. Suitable for drilling holes within 3mm/0.12 inch (Iron Plate, Copper Plate, Aluminum Plate).
DCT Taper Gauge Jig Tool Kit Set for Tapering (Angle Cutting) Wood Tapered Legs and More on Radial Arm or Table Saw
...uge Jig Tool Kit Set for Tapering (Angle Cutting) Wood Tapered Legs and More allows for complete workpiece control when making taper or angle cuts on any radial-arm or table saw.
Making a taper on a piece of wood is difficult with only a table saw and dangerous attempting free-hand, so this jig with a removable and adjustable stop allows you to make tapers safely and accurately.
Easily taper table legs or use for construction and remodeling.
VARIOUS TAPERS APPLICATIONS: Reversible for left-hand or right-hand operation so anyone can cut out items like tapered table legs, tapered waste baskets, magazine racks, molding cuts, and dado cuts.
The thumb wing nut enables fine adjustment of the jig for all applications up to 24 inches (length of jig legs).
ACCURATE MEASUREMENT: Includes an easy-to-read graduated scale that measures up to 3 inches per foot or 15 degrees of taper.
Gauge allows you to make adjustments to change the angle to your fence so you saw safely with a consistent and reproducible taper.
EASY TO USE: Mark your piece of wood with the angle cut you want to create, set the taper jig next to the piece of wood and measure the distance from the marked angle to the taper jig on both the small and large sides of the marked angle, adjusted taper width....
