Best Adjustable Welding Clamp

Strong Hand Tools CPL45 , Pipe Fit-Up Clamp, Pipe Welding Alignment Tools (Pipe Diameter Capacity: 2″ ~ 4″ (50~100 mm))

  • A compact, light weight, portable clamp for the quick fit-up of round pipes and flanges for butt welding. Easy-to-use design for the rapid, repeated loading and unloading of work pieces..
  • A compact, light weight, portable clamp for the quick fit-up of round pipes and flanges for butt welding..
  • Easy-to-Use design for the rapid, repeated loading and unloading of workpieces..
Check Stock

Mig Welding Machine,MYYWELD Mig Welder MIG/MMA/TIG 3 in 1 Flux Core Wire Digital 130D Dual Voltage 110/220V, Gas/Gasless Stick-Solid Wire Automatic Feed IGBT Inverter Welder

  • The application of IGBT technology has significantly enhanced the welding machines reliability and turned them into a lighter and compact version . Also you canot ignore about this wire feed welder is the integrated wire feeder, to whom you should thank when you see a smooth wire feed. 2lbs quality welding wire included..
  • MULTIFUNCTIONS IN ONE MACHINE- You can work with CO2 gas, mixed gas or without gas. Welding machine mig uses 0.8mm or 1.0mm flux core wire.Gasless(flux core wire) and Gas(solid wire) welding: supports 2 lbs/ 10 lbs .030’’ or .040’’ wire to weld over. 030’’ thickness carbon steel stainless steel/mild steel. Duty Cycle: 60% at 130A. LIFT TIG Welding is not high frequency TIG mode, just switch to “LIFT TIG” on the panel. Stick Welding switch to “MMA” on the panel and adjust the current as needed..
  • WORKS WELL AND EASY TO PICK UP 3 in 1 welder - This portable welding machine is an amazing portable welding unit. The adjustments are simple, the sound is smooth and the welds are outstanding quality. Automatic settings are pretty accurate. The welding machine case is metal. Welder is sturdy. 100% satisfied with the fast wire feed rate way wether it welds thick or thin materials. This MYYWELD Mig Tig stick welder performs gr....
Check Stock

MIKMAYTOO Small Quick Release Horizontal Toggle Clamp Hold Down Hand Tool 201A Hand Tool 60 lbs / 27kg (201-8PACK)

  • 【Packing type】8 PCS hand tool Toggle Clamp GH-201 non-slip red horizontal clamp quick release tool.
  • 【Holding Capacity】27Kg / 60Lbs, solid grip.
  • 【Material】 Cold rolled carbon steel, galvanized coating, corrosion resistant. Rugged grip, mounted on clamps, tool holders or removable bases..
  • 【CLAMP SPECS】7.5 x 2.5 x 1.7cm/ 3" x 1" x 0.7"(L*W*H).
  • Hole Dia : 0.6 x 0.4cm/ 0.23" x 0.15"(L*W).
  • 【Wide Range of Uses】Rugged fixtures, mounted on fixtures, tool holders or movable bases, are ideal for fast fixing of metal plates or boards for machine operations, woodworking, welding, molds and more..
Check Stock

ANDELI 110V/220V 200AMP Aluminum Tig Welder AC/DC Tig Welder With Pulse Cold Welding Machine TIG-250PLS AC DC Al SUIT

  • 【Function】 This is a Cold Welder/AC/DC Tig Welder machine with a voltage of 110V/220V. The current is 200 AMP. There are 4 modes at the same time: pulse TIG, HF TIG, cold pulse, cold welding, suitable for aluminum, stainless steel and thinner metals..
  • 【Cold welding】Can reduce deformation and discoloration. In cold welding mode, the color of aluminum and stainless steel welds is silver-white. Applicable materials: aluminum, stainless steel, molds, etc. PS: pure argon is required.
  • 【Amazing effect】 ANDELI Aluminum Welder is a breakthrough machine, Real 200AMP output current, utilising the efficiency and reliability of Multiple IGBT Inverters allowing a huge increase in duty cycle!strong input makes you fall in love with welding.Multi-mode selection, more intuitive control. ANDELI TIG-250PLS can weld 0.04 inch seamless aluminum plate by cold spot welding, and use cold welding to weld 0.015 inch -0.12 inch stainless steel plate..
  • 【Package delivery】 Argon arc welding and aluminum sleeve: TIG-250PL ACDC 110V / 220V, with American standard plug, grounding clamp 2m, aluminum torch WP-26 4m, Nozzle * 10, Collet * 10, House clamp * 2, Tungsten pole * 10, Foot switch * 2.
  • 【Safety】CE certification, Efficient customer service team, if you encounter....
Check Stock

DCT C Clamps for Woodworking Welding Clamps Locking Pliers Set 3-Piece Wood Clamp Set 11in and 6in Swivel Tip

  • ...R PROJECT: Use the DCT | 3-Piece Hand Tools C Clamp Set to grip your project without slippage.
  • This locking C clamp set includes 1 clamp with regular pads and 2 clamps with swivel pads for damage-free automotive work with auto body panels, most home improvement and repair, woodworking wood joints projects, and some welding applications.
  • 3 CLAMPS, 2 SIZES: 11-inch clamp with swivel pad tips for securing medium to large work, approximate 1-inch (2.5cm) maximum opening, 0.9-inch x 1.1-inch (2.3cm x 2.8cm) flat clamp face size.
  • 6-inch clamp with swivel pad tips for small to medium pieces, approximate 0.7-inch (1.7cm) maximum opening, 0.7-inch x 0.8-inch (1.8cm x 2cm) flat clamp face size.
  • 6-inch clamp with regular tips, approximate 1.3-inch (3.2cm) maximum opening, 0.4-inch x 0.3-inch (0.9cm x 0.7cm) rounded clamp face size.
  • BUILT TO LAST: Constructed from nickel-plated carbon steel for maximum strength and longevity.
  • Hex key adjustment screw for adjusting to the correct pressure.
  • Classic guarded trigger release for maximum locking force and keeps pliers locked securely.
  • Unlike other C-type clamps, these C clamp locking pliers are designed with the handle opposite the clamp to allow access to tight spaces.
  • Each wood working clamp comes lightly pre-oiled fo....
Check Stock

WYQYQ 4pcs Corner Clamp - Right Angle Clamp 90 Degree Wood Clamps For Woodworking, With Adjustable Swing Jaw Aluminum Alloy Frame Clamps, For Welding, DIY Woodworking.

  • WYQYQ 90 degree angle clamp maximum clamping range is approx. 2.75in/70mm.
  • Quality Throughout: right angle corner clamp is high-quality aluminum alloy die-casting, sturdy and durable, non-slip rubber handle, and comfortable in hand..
  • Precise And Easy To Fixed: 90 clamp with adjustable jaws and rotating nuts, the single-handle claw can be rotated in both directions, and two wood blocks of different thicknesses can be connected at a right angle.the oblong hole can fix it on the workbench..
  • Multi-purpose:right angle clamps are used to fix wooden corners, welding, framing, carpentry, drilling, dowels, making cabinets, installing furniture, etc..
  • What You Get: our friendly customer service, and 4pcs high quality angle clamp to help you complete your work better and faster..
Check Stock

ANDELI 110/220V Cold Welder TIG Welding Machine with Cold/Hot/TIG Pulse MOS Tube Cold Welding Machine TIG-250MPL

  • 【Cold welding machine】It is suitable for welding thin stainless steel, thin steel, carbon steel, and other materials. The welding temperature is....
  • 【Pulse function】Using the pulse function, the welding current will continuously drop from high current to low current, and then return....
  • 【Multi-function welding】 Cold welding, argon arc welding, pulse welding and dual-voltage welding machines are powerful assistants in welding, with....
  • 【About current】Please note that the maximum amperage of different voltages is different, the maximum current of 110V is 140A, and the maximum....
  • 【Delivery Package】110/220V TIG-250MPL, ground clamp 2m, COLD torch WP-9F 4m, TIG torch WP-17F 4m, gas pipe 3m, nozzle*20, collet*20, house....
Check Stock

Amico ARC-160D, 160 Amp Stick ARC IGBT Inverter DC Welder 115/230 Dual Voltage Welding Soldering

  • ...machine has an excellent Lift-TIG arc welding function.
  • 5-160A comfortably welds thin stainless steel and other various metals..
  • Automatic selection feature detects input voltage automatically, allowing you to easily switch between 100~250V/50~60Hz input power. Almost all of the voltages and frequencies can be used. Adjustable arc force settings allow you to meet your custom welding needs..
  • Incorporates advanced IGBT inverter technology with superior arc characteristics and has excellent arc stability. 80% duty cycle at 160 amps ensures long time welding and the machine can still work normally with an extended power cord up to 700 feet. The power cord can resist power fluctuations and cable attenuation at any length..
  • ARC-160 has very powerful functions, making it easy to start and use. The machine has a built-in hot start function, anti-stick function, thrust adjustment function, current-intensity control function, and automatic compensation for voltage fluctuations: over-voltage protection, under-voltage protection, over-current protection, and over-load protection..
  • ARC-160 Stick Arc with Lift-TIG can achieve the perfect weld. It is a welding machine of the highest level.
  • the strength of its components makes it a reliable work tool for professionals o....
Check Stock

10PCS Toggle Clamps 201 Quick Release Hand Tool Antislip Red Horizontal Clamp 60Lbs Holding Capacity

  • 【THE GOODS IN THE PACKAGE】:10Pcs Toggle Clamps 201.
  • 【TOGGLE CLAMP SIZE】:7.8 x 2.8 x 1.8cm/ 3" x 1.1" x 0.7"(L*W*H).
  • Hole Dia : 0.6 x 0.4cm/ 0.23" x 0.15"(L*W).
  • 【MATERIAL】: Cold-rolled carbon Steel with Zinc plated coating for corrosion resistance.
  • Oil and Stain resistant red vinyl solid hand grips, complete with adjustable rubber pressure tips..
  • 【WIDE USAGE】Rugged fixtures are best for quickly holding down sheet metal or circuit boards,for machine operation,woodworking,welding,mould,electronic equipment assembly,etc field.Widely used on during welding processing, riveting processing and other processing of fixture products..
Check Stock

ARCFONY Plasma Cutter Welder Machine - 50Amp CTS528XP Non-Touch Pilot Arc Plasma Cutter, 3 in 1 200Amp TIG MMA Welders, Dual Voltage 110V/220V

  • ...s of 14mm, ideal cutting thickness of 10mm..
  • TIG & MMA Mode: 200Amp tig welder machine adopts HF arc ignition technology and has the functions of HF TIG, spot TIG and pulse TIG. The welding has little damage to the base metal and can weld thin process parts. 180Amp MMA adjustable arc current, arc welding stability. Suitable for 1.0mm to 4.0mm different acid base electrode welding..
  • Easy To Use: Plasma Cutter machine adopts IGBT inverter technology, 110/220V dual voltage automatic recognition of input current and voltage. Plasma Cutter equipped with NPT 1/4 "air regular, Duty cycle is 60%. Built-in post time, when you stop cutting, the air runs for a minute to cool the consumables of the plasma cutting torch and extending the life of consumables..
  • Safe & Portable: Built-in overload protection and fan cooling system. When the output current and machine temperature exceed the set standard, the plasma cutter will automatically power off. It can be connected to 110 or 220 volt outlets without tools and can be carried in the workshop or on the job site..
Check Stock