【 Portable Air Compressors】Air Compressor is equipped with four high pressure cylinder and can be compressed air maximum up to 20-30mpa/200-300bar/3000-4500psi, gauge pressure indicate, safe valve will be automatic leaking after full filling..
【Breathing Air Standard】This high quality air compressor can provide high-quality safe compressed air for human respiratory requirements for any industry that needs high-pressure pure gas source, meets the EU EN12021 and GB18435-2001 breathing air standard..
【110V Air Compressor】Air compressor consists of pump, motor, intake filter, belt, cool fan, oil separator & filter, safety valve, pressure switch, starter, frame, isolator etc, the Lubricate Oil we recommend that ISO grade 100/150..
【Paintball-compressor】Widely used in diving, fire fighting,outdoor construction,pipeline welding,container welding,scientific research and pressure testing,and laboratory,can also be used at PCP rifle paintball tanks..
JACO Lightning S2-Series Tire Air Chuck - 1/4\ F-NPT | Open Flow (2 Pack)
...e tire valve stem with absolutely ZERO air loss - eliminating any margin for error when precision matters..
EASIEST TO USE - 360 swivel head eliminates tension on your air hose & lets you make adjustments without air leaks. Laser-cut 1/4" F-NPT fittings allow for seamless compatibility w/ tire gauges, inflators, and compressor attachments..
OPEN FLOW - feature laser-cut threaded fitting (1/4 inch F-NPT) for compatibility w/ tire inflators & gauges to control air flow from compressor w/ precision for tire inflation (not recommended to attach directly to air compressor hose)..
BUILT TO LAST - engineered by the experts at JACO w/ over 35 years of experience in the industry, and proudly backed by our 100% Lifetime Warranty. Experience firsthand the most revolutionary advancements to air chucks ever made with our exclusive Lightning Technology..
1/2\ Brass Electric Solenoid Valve,110v Ac Brass Electric Solenoid Valve for Water Air Gas Fuel Oil
High quality normally closed electric solenoid valve:Model:2W160-15.
Size:1/2 inch,Working temperature range: 23-176°F；Pressure range：0-145Psi.
Constructed of industrial grade brass, this valve is corrosion resistant, more conducive for welding, optimal for higher temperature projects, and can be used with gasoline, diesel fuel, kerosene oil, natural gas, air etc.Due to the chemical composition of brass, this valve should NOT be used with projects involving drinking water or other water projects..
This solenoid valve 110v was manufactured with a VITON seal,two-way inlet and outlet ports with standard female thread NPT connectionsm and heat and oil resistant Viton gasket..
Applicable use in many fields: Irrigation controls (garden, farm,etc.), liquid controls ( pipeline, artificial river etc. and air controls ( lab, factory, etc.).
Satisfaction guaranteed! Try any product we sell for a full 30 days. If not completely satisfied, return it to us for a no-hassle refund or credit..
DJ TRANS PARTS – 45RFE 545RFE 68RFE Solenoid Pack – Quality and Tested OEM product – Compatible with Dodge, Chrysler, & Jeep – Years 2004 and Up | Warranty Included with Purchase (RENEWED)
COMPATIBLE WITH – Here is a list of products that is compatible with this item. Feel free to google the part numbers as well to ensure it fits your vehicle. Compatible with Chrysler 300 2010-11 Valve Body Solenoid, Chrysler 300C 2010-11 Valve Body, Chrysler Aspen 2007-09 Valve Body Solenoid, Dodge Avenger 2010-11 Valve Body, Dodge Challenger 2010-11 Valve Body, Fit for Dodge Charger 2010-11 Valve Body Solenoid, Dodge Dakota 2004-11 Valve Body Solenoid, Dodge, Durango 2012 Valve Body Solenoid..
PRODUCT IS REMANUFACTURED OEM PART– All of DJ Trans Parts items are original OEM products. That being said, they are not brand new but refurbished. They are remanufactured and tested to ensure they work. This means you are getting the actual transmission, valve body, solenoid kit, etc. that your car needs. You can ensure our products will work with OEM parts..
PART NUMBERS - Here are the related part numbers of this item - 5RFE 545RFE 68RFE Transmission Solenoid Block Pack.
INSTALLATION VIDEOS ONLINE - Searching related installation video on the internet will be recommended. You can find these videos on Google and searching the part numbers online. We recommend to always wear eye protection and start with installation tools..
Surwit 15810-RAA-A03 VTEC Solenoid Spool Valve Assembly with Oil Pressure Switch & Gasket Compatible with Honda Accord Element CR-V 2.4L Civic Acura RSX 2.0L Part# 15810-RAA-A01 15810-PPA-A01
The VTEC system provides the engine with valve timing optimized for both low and high RPM operations. The VTEC solenoid actually allows oil to flow to the internal galleries of the overhead camshaft. This means that the housing of the solenoid is holding back full engine oil pressure. A spool solenoid valve can direct the flow of hydraulic fluid. The valve is made up of spools that rotate or slide to block and open channels in a hydraulic system..
Customers can find the product you need accurately according to the OE number. OE part number: 917-224, 15810RAAA03, 15810RAAA02, 15810-RAA-A01, 15810PPAA01, 15810PNEG01, 15810-RAA-A03, 917224, 15810-PNE-G01, 15810-RAA-A02..
While a VTEC solenoid rarely goes bad, problems with VTEC not engaging properly are extremely common. Most of the time incorrect wiring is to blame, but occasionally something even smaller is the culprit. When a solenoid is bad, may mean the solenoid's plunger is either mechanically stuck in a closed position and therefore always making contact which may eventually cause the starter motor to burn its w....
Primefit CR1401G Replacement Air Regulator with steel-Protected Gauge, 1/4" Npt
Material: plastic and zinc alloy and copper.Maximum voltage: 240V.Maximum current: 15 amp.Maximum pressure: 180 psi, 12 bars..
Voltage (V): 240.Diameter of female thread: 1/4 PT.Features: Durable and useful..
Diameter:about 5.91inch-7.09inch(150mm -180mm). Size: 4.13 inch x 3.15 inch x 2.64 inch (105 x 80 x 67mm).Applicable compressor type:Piston compressor..
Easy to install and disassemble.With the barometer, can be set and read the data.With the valve button, you can adjust the atmospheric pressure as needed.Can help save electrical energy..
Strong plastic shell and excellent performance.The air compressor pressure switch is an extremely imperative element, it is used to install or connect the air compressor or trachea, to regulate the air pressure, to start up The main role of this valve is to regulate the stop and start pressure of the air compressor.
Dreyoo Lock on Air Chuck, 1/4” FNPT Heavy Duty Closed Flow Tire Chuck for Tire Inflator Air Compressor Air Accessory Kit, Standard Bore Valve Stem Quick Connector for Valve Adapter (1)
Closed Flow: closed flow air chucks feature internal “check valves” that do not allow air to flow to or from the chuck unless the chuck is engaged with a tire valve stem, which makes them more efficient for using directly on an air compressor hose line, since they will not rapidly deplete the air tank unless engaged with a tire valve stem.
Easy to Use: pushed forward the sleeve to lock the valve stem and pulled back the sleeve to release the lock on air chuck, it makes things easy that you can use one hand to seal and release the chuck.
Standard Size: the top thread, 1/4 Inch FNPT.
Heavy Duty: the lock on air chuck, made of steel and zinc, can prevent rust.
The inside three claws are metal plating to protect them from oxidation.
Wide Use: the top thread is standard size 1/4 inch FNPT, fit for most tire inflator air compressor, air accessory kit, air compressor accessories, inflator gauge compressor accessories.
Ellbest 1/2" Electric Solenoid Valve 2W-160-15 AC110V Brass Valve NC Normally Closed Valve for Water, Air, Gas
High quality electric solenoid valve, for water, air or oil.
Durable brass construction and a high quality copper solenoid are made to last..
This valve is N/C (normally closed), meaning it is closed when power isn't supplied..
It's applicable in many fields: Irrigation controls (garden, farm,etc.), liquid controls ( pipeline, artificial river etc. and air controls ( lab, factory, etc.).
JACO Bike Presta Valve Tire Air Chuck - 1/4" NPT (2 Pack) (Open Flow)
Open Flow - these Presta valve attachments are open flow, meaning air will flow freely through the chuck even if not engaged with the tire valve stem (no check-valve). Must be used with an inline tire inflator gauge or standard tire gauge (Not for DIRECT connection to air compressor hose)..
1/4 inch F-NPT fittings - feature a standard 1/4 inch F-NPT fitting, making them compatible with inline tire inflator tools and tire gauges..
Rugged & reliable - these straight angled Presta valve tire chucks are made of high-quality brass, providing a sturdy and reliable connection between your tire inflator tool and your bike tires..
Presta valve compatibility - the air chucks are specifically designed to work with presta valve equipped bike tires, allowing you to quickly and easily inflate your tires (NOT for Schrader valve types)..
Easy to use - simply attach them to any hand-operated, inline tire inflator tool connected to an air compressor hose, and start inflating your tires (NOT for use with floor pumps, hand pumps, or 12v air compressors)..
