Hhobake 12V 150db Air Horn with Air Compressor ,18 Inches Trains Horns for Vehicles, Car Truck RV Van SUV Motorcycle Off Road Boat
...p to 120PSI. When the pressure drops to 90 psi, the compressor will kick on and pump back up to 120PSI. And comes with 2 vibration pads to install under each leg when mounted, a 30 amp fuse, a petcock style tank moisture drain, and 3'ft of 3/8" air hose for the air horn hook-up that is to be used with the push lock fitting on the side of the air tank connecting to the push lock fitting on the air horn..
【EASY TO INSTALLAT】It’s super easy to install!First,you fix the motor to a certain position on the car with a nut, then fix the horn tube horizontally outside or in the engine, It's flexible and portable..
【 WIDELYAPPLICATION】Trumpet Air Horn Compressor Kit Can be mounted on cars, trucks, vans, tractors, motorcycles, boats or any application that has a 12V DC power available..
Class A Customs | T-7500 | 75 Gallon Fresh Water Holding Tank
75 Gallon Fresh or Gray Water Holding Tank Manufactured by Class A Customs - Made from NSF Approved Materials - Fresh & Drinking Water Safe - Can be used for Fresh or Gray Water Storage.
WATER TANK MEASUREMENTS: 50.5” Longest Length (not including fittings) x 17.5” x 19.5” - Tank can sit on any side - rotate tank to change height or width Average Thickness 7/32” +/- Please view photos. (Due to the manufacturing process +/- .25" on each measurement).
TANK BUILT-IN FITTINGS: (TWO) 1.5" Female NPT Fitting - fitting is sealed and water-tight, to use remove membrane with razor knife (TWO) .5" Female NPT Fitting - fitting is open DO NOT Over-tighten fitting damage will occur – Use plastic threaded fittings, metal threads may damage tank fittings.
NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process..
Great extra water storage in RV, pop-up camper, off-road vehicles, concession trailers, hot dog carts, smaller food vendors and portable hand washing sinks. Class A Customs Manufactures this item in the US....
SINTLY 3/8\ NPT to 6AN Flare Male AN6 Straight Fitting Union Flare Adapter Aluminum Black 2Pcs
【Tips】To obtain a proper seal in the NPT joint, you need to use a sealant compound or PTFE tape. The thread is sealed by wedging. The NPT connection cannot be reused. When accessories are reused, this can cause wear or increase the possibility of leakage..
【37 Degree Flare Fitting Taper】:The 6an male flare to 3/8" NPT fitting has one male side AN is a 37-degree flare fitting taper and the other male side NPT is a 60 degree tapered threads. These adapter hose fittings are designed to quickly make professional 37° AN connections from NPT tapered pipe threads. Designed for smooth flow that gives better fluid flow, tight security, and leaks free.
【Application】-6AN to 3/8" NPT straight flare to pipe adapter is widely used in kinds of liquids, oil, Water, Air, Fuel lines, E85, gas, etc. Bulkhead Fitting is perfect to apply in automotive, industrial, boat/marine, etc. The male flare fitting fit all oil cooler / fuel tank / fuel pump/fluid Line/turbo..
【Material & Features】Made of High-Performance Lightweight 6061-T6 Billet Aluminum Material. All threads are designed for the maximum percentage of engagement. One side is AN standard and the other is NPT National Pipe Taper Thread. Each straight fitting is completed with a black anodized fini....
Class A Customs | T-6500 | 65 Gallon RV Fresh Water Holding Tank
65 Gallon Fresh or Gray Water Holding Tank Manufactured by Class A Customs - Made from NSF Approved Materials - Fresh & Drinking Water Safe - Can be used for Fresh or Gray Water Storage.
WATER TANK MEASUREMENTS: 44.5” Longest Length (not including fittings) x 17.5” x 19.5” - Tank can sit on any side - rotate tank to change height or width Average Thickness 7/32” +/- Please view photos. (Due to the manufacturing process +/- .25" on each measurement).
TANK BUILT-IN FITTINGS: (TWO) 1.5" Female NPT Fitting - fitting is sealed and water-tight, to use remove membrane with razor knife (TWO) .5" Female NPT Fitting - fitting is open DO NOT Over-tighten fitting damage will occur – Use plastic threaded fittings, metal threads may damage tank fittings.
NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process..
Great extra water storage in RV, pop-up camper, off-road vehicles, concession trailers, hot dog carts, smaller food vendors and portable hand washing sinks. Class A Customs Manufactures this item in the US....
Ninja Air HPA PRO V2 Series Tank Regulator - 4500 PSI
The paintball air tank regulator max up to 4500psi high pressure gauge input, 800psi regulated output..
The HPA tank regulator fits most of air tanks with inlet threads M18×1.5-6H, the outlet threads size is G1/2-14..
The regulator made of good quality materials, sturdy and durable, an economical high performance tank regulator. With a high air flow rate to make paintball shoot out with faster speed..
The regulator comes with standard 8mm quick disconnect male foster fitting adapter for filling..
The regulator is high air flow rate, light weight, easily operation and re-buil dable, applicable medium with Air..
ARB 4X4 Accessories Digital Tire Inflator Bundle with Tire Inflation Kit for Air Compressors and E-Z Deflator Kit
Boost Projects Custom Kit Includes: ARB Digital Tire Inflator & Tire Inflation Kit For Air Compressors & E-Z Deflator Kit.
Tire Inflation Kit Includes: 1 x High heat pressure hose (18ft long) 1 x ARB air chuck with quick press fitting 1 x ARB T-fitting for use with the....
Digital Tire Inflator Specs : Large LCD Digital readouts with blue backlight, Battery indicator, Multiple measurements (Scale: 0-200 PSI / 0-14 Bar /....
Technical Specifications: 1/4 NPT Female (suites ARB fittings, included) Batteries - x2 AAA (supplied) Battery Life - up to 200 hours Auto switch on....
E-Z DEFLATOR KIT Corrosion Resistant Brass/Stainless Deflator Tool Quality Bronze Bourdon Tube Gauge Design Ensures Accuracy is Not Affected by....
LEIMO KPARTS AC Diagnostic Manifold Gauge Set for Freon Charging, Fits R410A R22 R404 Refrigerants, 1/4' Thread Hose Set 60' with 2 Quick Coupler-r410a Manifold Gauge Set
AC A/C Manifold Gauge Set —- 3-way air conditioning diagnostic manifold gauge set for R404a, R410a, R22 refrigerants. Designed for AC charging, diagnostic check and recovery work.
Necessary tools for HVAC, car air condition maintenance and coolant or Freon adding.Widely used for household air conditioning units.
Refrigerator, air conditioner and industrial refrigeration equipment..
Easy to operate and install, strong sealing for durability and safety.The solid brass gauge threaded connector and hose fitting is different from the brass plated construction, corrosion-resistant and rustless——ideal for professional auto mechanics. .
Freon Charging Hose 4000PSI Burst 800PSI Max W.P. each hose is approx. 5ft ( 60 inches / 152 cm) with 1/4″ SAE fitting——HIGH PRESSURE HOSES with ¼” SAE standard fittings using the highest technology rubber materials giving the hoses the most flexibility and reducing the risk of kinking.
Include 3-PC 5FT extra long Freon charging hose, 3 color for easily recognition, red for high pressure, blue for low pressure, yellow for refrigerant bottle –r410a manifold gauge set.