Class A Customs | 20 Gallon RV Concession Fresh Water Tank with Plumbing Kit & 12 Volt Water Pump | T-2000-BPK-PUMP
20 Gallon Fresh Water Holding Tank Manufactured by Class A Customs - Made from NSF Approved Materials - Fresh & Drinking Water Safe WATER TANK MEASUREMENTS: 32.5” Longest Length (not including fittings) x 11.75” x 11.75” - Tank can sit on any side - rotate tank to change height or width Average Thickness 7/32” +/- Please view photos. (Due to the manufacturing process +/- .25" on each measurement).
TANK BUILT-IN FITTINGS: (TWO) 1.5" Female NPT Fitting - fitting is sealed and watertight, to use remove membrane with razor knife (TWO) .5" Female NPT Fitting - fitting is open DO NOT over-tighten fitting damage will occur, use plastic connecting fittings as metal will damage threads..
NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process..
BASIC PLUMBING KIT INCLUDES - (TWO) 0.5” Hose Barb to 0.5” Male Pipe Thread Adaptor (FOUR) 0.5” Hose Clamp (ONE) 1.25” Hose Barb to 1.5” Male Pipe Thread Adaptor (TWO) 1.5” Hose Clamps (ONE) 1.5” Male Pipe Thread PVC Male Adaptor (ONE) 5ft. Section of 0.5....
Class A Customs 13 Gallon Water Tank & Plumbing Kit T-1300-BPK
...Fresh & Drinking Water Safe - Can be used for Fresh or Gray Water Storage.
13 GALLON TANK MEASUREMENTS 21” x 9” x 16”- Tank can sit on any side - rotate tank to change height or width Average Thickness 7/32” +/- Please view photos. (Due to the manufacturing process +/- .25" on each measurement).
TANK BUILT-IN FITTINGS: (TWO) 1.5" Female NPT Fitting - fitting is sealed and watertight, to use remove membrane with razor knife (TWO) .5" Female NPT Fitting - fitting is open DO NOT over-tighten fitting damage will occur, use plastic connecting fittings as metal will damage threads..
NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process..
BASIC PLUMBING KIT INCLUDES - (TWO) 0.5” Hose Barb to 0.5” Male Pipe Thread Adapter (FOUR) 0.5” Hose Clamp (ONE) 1.25” Hose Barb to 1.5” Male Pipe Thread Adapter (TWO) 1.5” Hose Clamps (ONE) 1.5” Male Pipe Thread PVC Male Adapter (ONE) 5ft. Section of 0.5” ID Vent/Draw Hose (ONE) 5ft. Section of 1.25” ID (1.375” OD) Fill Hose.
Hromee Air Compressor Hose 3/8-Inch x 50 Feet Hybrid Hose with Fittings, 1/4”NPT Swivel Universal Coupler and Plug Kit
... delivers 300-PSI for maximum working pressure..
HYBRID HOSE - The hose is constructed with hybrid which is blended rubber and PVC so it is lighter and less bulky than traditional solid rubber hose, more flexible and avoid binding, kinking, and tangling. Long using life is achieved in Hromee hybrid hoses..
SWIVEL END FITTINGS - One 360 degrees ball swivel end is equipped in the hoses. 1/4” FNPT brass swivel connectors never corrode, and seal better than aluminum, steel, or zinc. It is designed for avoid hose twisting that improves the reliability needed to get the best out of your air compressor and air tools..
COUPLER & PLUG KIT - Despite a swivel end, our engineers equipped with one 1/4'' NPT universal coupler which fits Industrial (I/M), ARO (A) and Automotive (T) and one I/M style plugs for connecting air compressor and air tools basically. The bend restrictors in the end of hose is for preventing kinking..
RANGE OF APPLICATION - Suitable for industrial, contractor, or household use. It is ideal for connecting supply lines,compressors, hose reels. With high visibility color yellow, you can quickly find your hose easily on a busy job site - then attach tools to the air supply..
JACO Industrial Quick Connect Air Hose Fittings | Plug & Coupler Kit - 1/4\ NPT (Set of 12)
SHOP GRADE - performance tested & built to last from 100% solid brass & steel designed for all-day use working with air compressor tools, hoses, and airline accessories in the garage or shop..
HIGH PRECISION - all fittings are built to 1/4 inch NPT industrial specs (Type D) for endless compatibility with your best air compressor tools & accessories (also called Type I/M)..
QUICK CONNECTION - couplers feature heavy duty six ball bearing insert opening for quick, airtight, and hassle-free connection to plugs - spend less time connecting your air line tools & more time conquering your jobs..
LEAK-PROOF - engineered with precision specs and applicable for home, commercial, and industrial use. All plugs & couplers will work with any size air hose or pneumatic tool that features 1/4 inch end fittings. All kits include a bonus thread seal tape roll..
100% Lifetime Warranty by JACO - never worry about needing the right size air fittings again. Trusted by mechanics & backed for life by our business with over 35 years of experience serving the pneumatic tools industry!.
ABN Recoil Hose, 1/4in x 25ft – Portable Polyurethane Coil Hose for Air Compressor, Nailer, Sprayer, Staple Gun
FOR ALL AIR HOSE APPLICATIONS: Use the ABN Recoil Hose, 1/4" Inch x 25’ Feet – Portable Polyurethane Coil Hose to transfer air in any industrial, contractor, or household application with air compressors, nailers, sprayers, staple guns, and other pneumatic tools.
NO TWISTS OR TANGLES: Equipped with (2) 1/4-inch installed male NPT swivel fittings with straight end steel bend restrictors for easier set-up and use while also reducing hose twists, tangles, and kinks.
COMPACT STORAGE: Hose stretches out to a 25-foot (7.6m) length.
Condenses to 11.5 inches (29.2cm) when not in use.
The pigtail style of the hose is a self-storing design that allows the hose to automatically spring back into coiled shape after each use.
FLEXIBLE: Remains flexible even in cold weather, which reduces user fatigue and helps protect delicate objects in your shop or garage.
BUILT TO LAST: Constructed from 5x8mm lightweight polyurethane (PU) for extra strength and longevity.
Brass Barbed Tee 3 Way Fitting 1/4 inch by 1/4 inch by 1/8 inch Hose Connector fittings for air fuel water lines 1
Lead Free Brass See photo for materials composition report.
Commonly used to connect lines for air, water, fuel, oil and inert gases in a quick and simple way..
They are commonly used for low-pressure applications in the food and beverage, marine, and chemical processing industries to convey air, fluids, and chemicals through a pipe system..
Ideal for quickly connecting polyethylene tubing for use in environmental pneumatic controls and other low-pressure applications with water and air..
Hose barb fittings are used most often in applications where we're using soft tubing. That could be beverage dispensing. That could be running an airline to your fish aquarium for your air filter. That could even be a low-pressure re-circulating pump on your aquarium as well. In a nutshell, hose barb fittings are used almost anywhere you use soft-side tubing and not in a high-pressure application. They make things versatile, very easy to use..
Dixon Air King AM7SWIV Iron Air Hose Fitting, Universal Swivel, 3/4\ NPT Male
Universal swivel fittings interchange with other Air King fittings and include a heavy-duty, free-turning joint that swivels under pressure to prevent hose kinking.
Wolo (860) Air Rage Heavy-Duty Compressor with 5 Gallon Capacity Tank
Designed for applications that require an on-board air system that can supply large volumes of high-pressure air.
Ideal for powering train air horns, air-locking differential, or to power light-duty pneumatic tools.
Use the coiled filler hose with brass fittings, to fill shocks, rafts and sporting equipment.
The heavy-duty compressor has an extended length stainless steel high-pressure hose, allowing the compressor to be separate from the tank for surface mounting.
Complete on-board air system that includes everything necessary for a professional installation.
Wolo (858) Tornado Heavy-Duty Compressor with 2.5 Gallon Capacity Tank
Ideal for applications that require large volumes of high-pressure air.
Ideal for powering train air horns, air-locking differential, or to power light-duty pneumatic tools.
Use the coiled filler hose with brass fittings, to fill shocks, rafts and sporting equipment.
The heavy-duty compressor is equipped with extended length stainless steel high-pressure hose, allowing the compressor to be separated from the tank for surface mounting.
Complete on-board air system that includes everything necessary for a professional installation.
4 Pieces 1/4 Inch NPT 360 Degree Swivel Air Hose Connector 1/4 Inch Swivel Air Plug Air Fittings Connectors Portable Air Tool Plug Male Thread Female Thread Household Industrial Coupler and Plug
360 Degree rotation: both male air hose connectors adopt 360 degree swivel design, which would not break the air hose, and prevent the hose from kinking, keeping the air line from getting tangled and twisted and increasing the maneuverability.
Widely applied: there are two connections of 1/4 external rotation and 1/4 internal rotation on the NPT swivel fitting, suitable for 1/4 inch male NPT and 1/4 inch female NPT, which can be applied to standard threaded fittings and most common applications at home.
Practical function: this swivel air hose connector can be applied in the air inlet of the spray gun or pneumatic tool, providing an unhindered air path and improving flexibility between the hose and the pneumatic tools.
Quality material: this air line swivel fitting is made of aluminum, solid and reliable, featuring strong corrosion resistance and rust resistance, which can offer you a long service life.
What you get: you will get 2 pieces of 360 degree swivel air tool plugs and 2 pieces of 360 degree universal hose swivel connectors, which can be applied together to avoid you buying twice separately.
