NEIKO 30252A Water and Oil Separator for Air Line | 1/4' NPT Inlet and Outlet | 90 PSI | Air Compressor and Air Tool Accessory | Protect Lifespan of Pneumatic Tools | Water Moisture Filter Dryer
...e conveniently located to removed anything trapped inside..
SPECIFICATIONS: Each in line air compressor moisture filter comes with a 1/4” NPT inlet and outlet for any standard air hose with a quarter inch fitting and can handle pressure to 90 pounds per square inch. Durable aluminum housing construction with brass fittings..
4 Pieces 1/4 Inch NPT 360 Degree Swivel Air Hose Connector 1/4 Inch Swivel Air Plug Air Fittings Connectors Portable Air Tool Plug Male Thread Female Thread Household Industrial Coupler and Plug
360 Degree rotation: both male air hose connectors adopt 360 degree swivel design, which would not break the air hose, and prevent the hose from kinking, keeping the air line from getting tangled and twisted and increasing the maneuverability.
Widely applied: there are two connections of 1/4 external rotation and 1/4 internal rotation on the NPT swivel fitting, suitable for 1/4 inch male NPT and 1/4 inch female NPT, which can be applied to standard threaded fittings and most common applications at home.
Practical function: this swivel air hose connector can be applied in the air inlet of the spray gun or pneumatic tool, providing an unhindered air path and improving flexibility between the hose and the pneumatic tools.
Quality material: this air line swivel fitting is made of aluminum, solid and reliable, featuring strong corrosion resistance and rust resistance, which can offer you a long service life.
What you get: you will get 2 pieces of 360 degree swivel air tool plugs and 2 pieces of 360 degree universal hose swivel connectors, which can be applied together to avoid you buying twice separately.
HaSaoMoi Air Brake Line Fitting, DOT Brass Push in Fitting, Push to Connect Union Fittings Air Brake Union 1/4" Tube OD for Trucks Trailers andIndustrial Use (4 Pack)
【PREMIUM MATERIAL】：Our push in fittings are made of high quality CA360 brass,Certified by DOT and Air Brake system Requirements,with corrosion resistance, high temperature ductility and low permeability. Great for long time use, dot air brake fitting pneumatic fittings type: 1/4".
【TYPICAL APPLICATION】：The air brake fittings assortment kit can be used with air systems, copper tubing in air lines brake systems, which is perfect for automotive car or truck repair,air operated seats, operating gauges, air horns, heater controls, industrial workshops, daily garden or lawn mower repair, towing machine hose connection and air brake connections ..
【EASY TO BE INSTALLED】: Union connect two tube with same OD. All quick connect fittings can be sealed by pushing the tube firmly into the fittings and they are also simple to be removed from the tube..
【MAX PRESSURE】: Working pressure from vacuum to 250 psi. Temperature Range: -40° F to +200° F（-40°C to +93°C）(Note: see tubing manufacturer’s recommendations for pressure and temperature mutations).
Racewill 25 ft 3/16 Copper Coated Brake Line Kit Includes 16 Fittings and 4 Unions Brake Line Fittings + Brake Line Double & Single Flaring Tool Kit
MATERIAL：Racewill copper coated steel line is easy to be bent by hand and flare by simple tools.all brake line fittings are made of durable brass to prevent rust and plated for corrosion resistance.
UPGRADE TO 20 FITTINGS: ① 2 x 3/16” (7/16-24) Inverted Tube Nut.
② 10 x 3/16" (3/8-24) Inverted Tube Nut.
③ 2 x 3/16” (1/2-20) Inverted Tube Nut.
④ 2 x 3/16"(9/16-18) Inverted Tube Nut.
RUST AND CORROSION PROOFING：Our 3/16 Copper coated steel line are the longest lasting brake line and much better than standard steel tubing. Copper coated brake line are ideal for vehicles experiencing harsh weather and environmental conditions.
MAKE DOUBLE & SINGLE FLARES: Designed to use when flaring single or double flare in a variety of material: copper, aluminum, brass, magnesium, and soft steel brake line tubing. Flaring tool apply to 1/2", 3/8", 5/16", 1/4", 3/16" O.D. tubing..
WIDELY APPLICATION：Brake line and fittings Fits for Most Hydraulic Braking Systems, Fuel Systems, and Transmission Systems,etc. It is also widely fit for household, industrial and commercial uses..
Hromee Compressed Air Piping System with 3\\/4 inch x 100 feet HDPE Tubing and Aluminum Outlet Blocks for Garage Connect Air Compressor Hose Accessories 37 Pieces
FAST INSTALL - Plan to locate your air compressor and compressed air outlets before installtion. The tubing is can be installed in the wall or hanging from the ceiling with tubing clips. A cutter and fittings are ready. Only a wrench is needed to tight the connection..
LEAK-LESS - High-density polyethylene(HDPE), a layer of aluminum is sandwiched between layers of HDPE, is extremely ductile, lightweight and corrosion resistant. And it has a smooth surface, which reduces the energy to push compressed air through the compressed air system. Above of all, it will keep pressure while running for long time. Operating Pressure: 200PSI at 73℉and 160PSI at 140℉..
EASY TO CONNECT - No glue, soldering or crimping needed. L-shaped and T-shaped fittings are equipped in the kit for different tubing extending directions. Double O-ring compression style ensures 100% sealing in high working pressure..
FLEXIBLE - Do not need to worry about elbows because HDPE tubing is flexible enough to be bent to any shape. The 3/4-inch inside diameter of the pipe has a bend radius of 6-8 inches. 100 Feet continuous pipe lengths which means less leak points. Inner Diameter: 3/4”.
EASY TO MODIFY - It’s convenient and low-cost to expand or make anoth....
JACO FlowPro Tire Inflator with Pressure Gauge - 100 PSI
Mechanic Recommended: Performance tested & calibrated accurate to ±2% at our NIST and ANSI certified calibration lab, providing the ability to measure, inflate, & air down tires with precision up to 100 PSI without relying on batteries. 0-100 PSI dial glows in the dark for high visibility at night..
Fully equipped with a solid steel body w/ a rugged matte black powder coated finish, heavy duty 21″ flexible hybrid air hose, precision “push-to-inflate” air filler thumb trigger, and built-in air bleeder valve to quickly air down overinflated tires..
Lightning Chuck – includes our all-new patented automatic lock-on Lightning Air Chuck w/ advanced locking mechanism & quick-release valve – no more leaking air or fighting with the valve stem for a proper seal..
Complete in-line inflation set – ready to attach to your air compressor set-up with 1/4″ NPT fittings – accessories includes (1) industrial quick-connect steel plug fitting, (1) thread seal tape roll, and Quick Start Guide..
100% Lifetime Guarantee by JACO (for any reason) when you order today, so click “Add to Cart” with confidence and take your garage or shop tire filling setup to the next level w/ professional, industrial-grade air tools!.
