SMACO Scuba Diving Equipment 1L Mini Scuba Tank with Hand Pump Support 15-20 Minutes Underwater Breathing(No More Than 30m) S400Pro Diving Oxygen Tanks for Diving Sightseeing/Backup Air Source, Black
✅【Longer Diving Time】The S400 diving cylinder can be used for 15-20 minutes when it is full of air (it's a test result in an environment of 16 ft underwater and 50°F, the diving time related to many factors: water temperature, water pressure, and personal breath rate and so one). SMACO scuba tanks are not only suitable for beginners' diving practice and recreational diving (no more than 33ft), but also as a backup gas source for professional divers (no more than 100 ft)..
✅【High Quality Diving Tank】The tank is made of 6061 aviation aluminum, the surface adopt anti-oxidation coating material, which can better resist seawater corrosion and rust. The regulator equipped with a decompression chamber and an explosion-proof valve for higher safety.
equipped with air switch, which can be turned off when not use to avoid air leak.
equipped with pressure gauge to see the real-time pressure.
the release valve is equipped in the breath valve, can easily release pressure..
✅【Professional Design】The 8mm inflatable male head can match most inflatable equipment.
equipped with a weight belt, you can carry the gas cylinder on your waist and move freely.
B BURCAM QUALITY PUMPS SINCE 1978 506538SSZ 3/4HP Stainless Steel Shallow Well Jet Pump System
CORROSION RESISTANT JET PUMP BODY: Drink cleaner water with corrosion resistant stainless steel pump body..
INDUSTRIAL TYPE MOTOR: 115/230 Volts Fan cooled industrial motor factory preset 30/50 pressure switch with pressure gauge included..
SHALLOW WELL JET PUMP: This pump can be used for a shallow well application with a maximum vertical lift of 25 feet..
STAINLESS STEEL PRESSURE TANK: 16 gal stainless steel tank has a synthetic butyl rubber bladder for reliability and long lifespan. There is neither water-air contact nor water-tank contact..
STATE OF THE ART JET PUMP SYSTEM: Complete stainless steel pump and pressure tank to deliver the highest quality water without any corrosion in the pump system..
B BURCAM QUALITY PUMPS SINCE 1978 506547SSZN 3/4HP Stainless Steel Shallow Well Jet Pump System
CORROSION RESISTANT JET PUMP BODY: Drink cleaner water with corrosion resistant stainless steel pump body..
INDUSTRIAL TYPE MOTOR: 115/230 Volts Fan cooled industrial motor factory preset 30/50 pressure switch with pressure gauge included..
SHALLOW WELL JET PUMP: This pump can be used for a shallow well application with a maximum vertical lift of 25 feet..
STAINLESS STEEL PRESSURE TANK: 6.6 gal stainless steel tank has a synthetic butyl rubber bladder for reliability and long lifespan. There is neither water-air contact nor water-tank contact..
STATE OF THE ART JET PUMP SYSTEM: Complete stainless steel pump and pressure tank to deliver the highest quality water without any corrosion in the pump system..
SMACO Scuba Tank 1L Mini Scuba Tank S400 Scuba Diving Tank Diving Equipment
...e equipped portable bag, you can easily carry it and free your hands to do more underwater. You can also split regulator and tank body and put them in the portable case, then you can take them on plane to diving in any place..
✅【PERFECT COMPATIBILITY】 : The scuba tank's inflation interface is 8mm, and the work pressure is 3000Psi/200Bar/20Mpa. It has three inflate ways: scuba adapter, electric pump and SMACO high pressure hand pump. When inflate with electric pump, please equipped with oil-water separator.
when use other hand pumps, please make sure it can reach up to 3000Psi. NOTE: using the hand pump to reach up to 3000Psi is tired, it takes about 30-45 minutes, we suggest to use it as a backup inflation devices.
✅【HIGH QUALITY MINI SCUBA TANK】: The tank body was made of aviation aluminum, can better resists to seawater corrosion and stands up well to damage. The regulator include inflation interface(8mm), pressure gauge, air switch, explosion valve, constant pressure valve. and the second-stage valve include mouthpiece, relief valve and breath tube. When normal used, all the parts could work for at least 2 years, and we also provide some free accessories in the accessories bag..
✅【PROFESSIONAL SCUBA TANK WITH DOT CERTIFIED 】:Our min....
... industrial air filter for increased air intake and greater efficiency. Durable cast iron cylinder reduces wear and increases pump life. Stable heavy duty steel tank body with rubber reinforced handle features easy mobility of toting the compressor from garage to outdoors or room to room..
POWERFUL 125 PSI OPERATING PRESSURE】 Delivers 3.9 CFM with a max pressure of 125 PSI for up to 50% more run time, low 56 dBA noise level provides a superior user experience, with oil free pump design for no maintenance and better cooling & ring wear for long life..
【DURABLE TWO GALLON OIL FREE PUMP】 2 Gallon tank combined with powerful motor provides plenty of power to tackle small projects, 125 psi max pressure stores sufficient air in the tank for continuous tool operation.The Built-In Regulator With Gauge help to adjust the airline pressure accurately for peak tool performance..
【MULTIPURPOSE】 The oil free air compressor is great for the garage, job site and workshop. Perfect for cleaning, inflation, hobby painting, fastening, nailing and bolting..
SMACO Scuba Tank 1L Mini Scuba Tank S400 Scuba Diving Tank Diving Equipment
..., with the equipped portable bag, you can easily carry it and free your hands to do more underwater. You can also split regulator and tank body and put them in the portable case, then you can take them on plane to diving in any place..
PERFECT COMPATIBILITY : The scuba tank's inflation interface is 8mm, and the work pressure is 3000Psi/200Bar/20Mpa. It has three inflate ways: scuba adapter, electric pump and SMACO high pressure hand pump. When inflate with electric pump, please equipped with oil-water separator.
when use other hand pumps, please make sure it can reach up to 3000Psi. NOTE: using the hand pump to reach up to 3000Psi is tired, it takes about 30-45 minutes, we suggest to use it as a backup inflation devices..
HIGH QUALITY MINI SCUBA TANK: The tank body was made of aviation aluminum, can better resists to seawater corrosion and stands up well to damage. The regulator include inflation interface(8mm), pressure gauge, air switch, explosion valve, constant pressure valve. and the second-stage valve include mouthpiece, relief valve and breath tube. When normal used, all the parts could work for at least 2 years, and we also provide some free accessories in the accessories bag..
PROFESSIONAL SCUBA TANK WITH DOT CERTIFIED :Our mini scuba tank have....
