YUHX Lead Free Brass Angle Stop Add-A-Tee Valve, Bidet 3/8 x 3/8 x 3/8 Inch Compression or 1/2 T Adapter for One-Piece Skirted Toilet , 3/8' Compression Outlet Easy Connect 3 Way Diverter
This T-Adapter can be installed on a 3/8" OD compression threaded water supply to divert to your bidet and toilet fill valve.
5 ★【 T-valve size 】3/8" OD female compression x 3/8" OD compression x 3/8" OD compression or 1/2 thread ,the 3/8 t adapter has 3 outlets , which can be used as one water inlet , two water outlets.
6 ★ Package Included:Inlet 3/8" OD female compression x 3/8" OD compression x 3/8" OD compression angle stop Add-A-Tee valve x 1 , 3/8" OD female compression thread to 1/2 NPT adapter x 1.
7 ★ T-valve : The 3/8 t adapter has 3 outlets, which can be used as one water inlet, two water outlets, providing new outlets for bidets, faucets, dishwasher.
HTDAK 12 Inch (About 30cm) Toilet Fill Valve Silent Toilet Repair Water Saving Dual Flush Fittings Silent Split Toilet Valve Top Button Replacement Assembly
Toilet flush valve: for split toilets with top button, button hole diameter 3.8cm, drain hole diameter 6cm-7cm, measured tank height: 27cm-34cm, with tank cover height: 32cm-40cm.
Toilet filling valve: for toilets with bottom inlet, installation thread G15/16, adjustable range according to different tank heights: 27cm-34cm..
The double flush valve of the toilet can adjust the water level up and down to achieve full flush or half flush, and save water by adjusting the flush volume to reduce unnecessary expenses..
The toilet replacement valve kit is made of stainless steel, high-density carbon particle rubber, and high-quality silica gel: it has anti-corrosion, wear-resistant, rust-proof, leak-proof and other properties, and is suitable for operation under various water pressures and water quality..
The universal toilet replacement valve body is simple in structure, easy to replace, and only takes 10 minutes to install. It is easy to clean and maintain, so that your toilet components can continue to run smoothly..
YSTOOL 10L Pneumatic Fluid Extractor Dispenser Set ATF Refill Tool Kit for Changing Oil in Engine Transmission Differential Transfer Case Gear Gearbox Power Steering Coolant with Pump Assembly Tank
... can find appropriate models by applicable manual.
YSTOOL pneumatic oil change tool set allows two-way operation of oil suction and refueling, quick and sparkless. Absorb, transport and distribute liquids under safe and clean conditions. The consistent conversion of the 2-way control valves (blue screw valve and air inlet ball valve) on the pump assembly to achieve the conversion between extracting and dispensing, very easy. Pneumatic tool, works with vacuum pump to extract and with air pump to refill, ensuring high efficient and labor-saving.
Pump assembly incorporates the container cover, the handle trigger with lock, 2-way control valves for conversing evacuate and dispense, safety valve for automatically releasing excessed pressure (above 43psi /3bar), 1/4" American style air inlet plug, pressure gauge (0-80psi/0-6bar) for monitoring the pressure change, quick coupler for connecting main hose. 10L big capacity well constructed container, is marked with accurate scale to help observe the amount of liquid. Stable base avoids dumping.
The main hose is 80" long, with a quick plug on one side to connect the container, and a quick coupler on the other side to connect the dipstick tubes or ATF adapters. There is a ball valve on the quick coupler to control....
Watts Premier Instant Hot Water Recirculating Pump System 6\ X 6\ & Cash Acme 3/4 Inch Tank Booster Water Heater Thermostatic Mixing Valve with Temperature Gauge and Braided Hose
Product 1: Kit includes a pump with timer with 10' cord, 2 adapters with rubber washers, valve mounting screws, sensor valve, and two 12-inch supply lines.
Product 1: Voltage: 120 volts, Item Weight: 8.5 pounds. Overall Dimension: 6.2 x 6 x 5 inches.
Product 1: Provides hot water at every faucet or shower when needed and helps eliminate wasted water.
Product 1: Easily installs to existing plumbing and is maintenance-free.
Product 2: The tank booster Pro features a lockable adjustment, recirculation port, non-returns integral to both inlets, filters for both inlets – hot inlet and cold inlet supplied.
Product 2: The tmv is factory set at 120°f (49°c), but has an adjustable temperature range: 95°f (35°c) – 130°f (54°c).
Product 2: Includes the tank booster temperature gauge in the us.
Ezcasch 150W Aquarium Chiller 42 gal Water Chillers Hydroponic Cooler Fish Tank Cooling System for Axolotl Coral Reef Shrimp 160L with Detachable Air Inlet and Outlet Mesh.
【Essential for Hydroponics and Aquariums】The 42gallon water chiller adopts compressor refrigeration, which sets the ideal water temperature at....
【RAPID HEAT DISSIPATION】Front air inlet and rear air outlet, this aquarium chiller provides powerful ventilation to dissipate compressor heat,....
【DETACHABLE AIR INLET AND OUTLET MESH】The chiller performs great at home, with the detachable air inlet and outlet mesh, the machine runs stablely....
【EASY OPERATIONS】This chiller is mainly gray as a whole. With simple and elegent appearance. Easy to set the temperature. The English manual is....
【WIDELY USE】Necessary for home breeding or small aquarium, suitable for home, aquarium, freshwater tank, fish tank, aquatic plants, crystal....
Kerick Valve MA052 PVC Mini Float Valve, Tank Mount, Adjustable Arm, 1.5 gpm at 60 psi, 1/2\ NPT Male
Estimated rate of flow up to 1.5 gpm at 60 psi.
Tank mount with extended threads on inlet side of valve for mounting through tank wall.
Note: MA052 has a 1/2 NPT pipe thread. This is extremely common in the plumbing world. The thread measures about 3/4 of an inch in diameter, this is a common mistake to those who are unfamiliar with pipe threads and plumbing.
1/2" NPT male threaded inlet and free-flow outlet.
LUMAX LX-1185 Black 18 oz. Suction Gun with 12\ Vinyl Flex Hose. Excellent for Draining and Filling Differentials, Transmissions, Clutches, Gear Cases and More!
45 to 72-inch bowl height adjustment with large telescoping 14-inch/2.75-gallon bowl.
Includes combo evacuation hose/sight gauge.
Utilizes standard pressure relief valve and fixed air inlet regulator.
Unit maneuvers on two 3-inch ball-bearing swivel castors and two 6-inch fixed-axle wheels for easy manipulation over shop floor obstacles.
18-gallon tank with all-steel construction designed to provide an affordable option for draining, transferring and evacuating used oil.
OEM UPGRADE 5221ER1003A 5220FR2006H Washer Water Inlet Valve by Beaquicy - Replacement for Ken-more L-G Washing Machine
✅【IDEAL REPLACEMENT】: ◆5221ER1003A Washing Machine Water Inlet Valve can control the flow of water into the washing machine. There are one inlet (standard hose fitting) and 3 outlets (2 of the outlets face 45 degrees to the right, one outlet faces 45 degrees to the left). This valve is used for cold water fill and pre-wash.◆5220FR2006H Washing Machine Water Inlet Valve for Hot Water controls the water flow into the washer. This inter valve has a standard hose fitting inlet and one water outlet..
✅【OEM UPGRADE IMPROVED】: The package includes 1 x 5221ER1003A Cold Water Inlet Valve, 1 x 5220FR2006H Washer Hot Water Inlet Valve. They are made of durable high-quality materials, well tested by the manufacturer, upgraded and improved on the basis of the OEM, and added metal strainer to the inlet of hose fittings. The standard hose fitting of 5221ER1003A is changed to yellow for better distinction and the main body is in aquamarine blue. The main body of 5220FR2006H is in turquoise green..
✅【WIDE COMPATIBLE】: 5221ER1003A Washer Water Inlet Valve and 5220FR2006H Washer Water Inlet Valve for Hot Water can fit for Ken-more, L-G washing machine. ★5221ER1003A replaces numbers: 5221ER1003C, 5221ER1003D, 5221ER1003F, 4322702, AP5986564,7964153....
Air Operated Double Diaphragm Pump QBY4-25L 1 inch Outlet 35 GPM Pneumatic Transfer Max 120 PSI Industrial Use Chemical Waste Oil Dual Dissepiment Nitrile Fluorine Rubber by Cast Iron Aluminum Alloy
Suction: 23 ft(7M).Can not use for corrosive liquid..
【MAXIMUM HEAD】Air-Operated Double Diaphragm Pump have top quality, a double-acting seal that delivers better performance. 1/2 inch air inlet with NPT fitting uses standard shop air for easy operation.275.59FT/84M, Max Temp : 150 ℉, Max Pressure: 120 PSI..
【EXCELLENT PERFORMANCE】Double Diaphragm Pump features an externally serviceable air distribution system and all-bolted construction. Modular air valve is stall-free, this low pulsation air valve provides smooth and rapid changeover for increased efficiency and minimizes down time..
【RUGGED CONSTRUCTION】 Diaphragm Pump resists corrosion for reliable performance and long life. Bolted construction is designed for leak-free fluid handling..
【WIDELY USE】The diaphragm pump with convenient operating are widely used in various industries, such as petroleum, metallurgy, mining, coating material, paint, printing, paper making, water treatment, automoti....
