MC Enterprises 91365MC Ignition Module for Dometic Water Heaters (Replaces 93851MC)
【Standard 1/2'' Size】The thread size of our rv water heater drain plug is 1/2" NPT male threads, this RV water heater replacement drain valve great replacement for your RV water heater.
【Additional Teflon Tape】Teflon tape is a necessity for replace hot water heater valve, made of PTFE material, has a sealing function to prevent the leakage of water.
【Brass body and Steel Handle】The body of the drain cock is made of high quality brass, the top of the drain cock is made of hardened steel. Heavy duty hardened steel material and good structure can ensure that the rv water drain valve can provide long term service.
【Perfect Replacement】This upgraded water heater drain valve is ideal for RV, camper, and trailer water heater, this rv water tank drain valve effectively solve your leakage problem on the water heater..
【Tips】You should flip open the hot water pressure relief BEFORE draining. That will take any pressure off of the tank. And add thread tape to both the large and small nut before you install.
SMACO Scuba Diving Equipment 1L Mini Scuba Tank with Hand Pump Support 15-20 Minutes Underwater Breathing(No More Than 30m) S400Pro Diving Oxygen Tanks for Diving Sightseeing/Backup Air Source, Black
✅【Longer Diving Time】The S400 diving cylinder can be used for 15-20 minutes when it is full of air (it's a test result in an environment of 16 ft underwater and 50°F, the diving time related to many factors: water temperature, water pressure, and personal breath rate and so one). SMACO scuba tanks are not only suitable for beginners' diving practice and recreational diving (no more than 33ft), but also as a backup gas source for professional divers (no more than 100 ft)..
✅【High Quality Diving Tank】The tank is made of 6061 aviation aluminum, the surface adopt anti-oxidation coating material, which can better resist seawater corrosion and rust. The regulator equipped with a decompression chamber and an explosion-proof valve for higher safety.
equipped with air switch, which can be turned off when not use to avoid air leak.
equipped with pressure gauge to see the real-time pressure.
the release valve is equipped in the breath valve, can easily release pressure..
✅【Professional Design】The 8mm inflatable male head can match most inflatable equipment.
equipped with a weight belt, you can carry the gas cylinder on your waist and move freely.
Timbertech Upgraded Airbrush Single-Piston Oil-free Mini Compressor ABPST08 with Cooling Fan 3L Tank Regulator Moisture trap for hobby tattoo graphic and so on
Cool-Down Fan to reduce the air compressor temperature and extend the lifetime.
Compact, portable and quiet (47db)-can be used unobtrusively in the home, maintenance free oil-less piston,built in carry handle-light and easy to....
Receiver tank-ensures pulse free output with constant air flow 20-23L/Min, and takes some stops between two refilled session for more long lifespan.
Industrial type Pressure regulator with gauge, water trap and air filter,Pressure relief safety valve, Overheat protector.
Ideal for designers, modellers, artists, cake decorators, nail art, spray tanning and any other airbrush application (Please note: This Air Compressor....
Aquarium Air Pump Aerator Pump: Upgraded Ultra Silent Air Pump for Fish Tank High Energy Saving Fish Tank Aerator Aquarium Accessories with Check Valve Air Stone 1-15 Gallon Fish Tank Bubbler 1W
...or your fish tank, which is perfect tool for improving fish health at home..
SPECIAL CHECK VALVE DESIGN - The aquarium air bubbler is equipped with unique water flow check valve, that can be adjusted to ensure that the aquarium or fish tank oxygen pump maintains stable air pressure and airflow. Kindly Note: ① please put the air pump about 25cm(10 inches) higher than the water level in order to avoid water backflow.
②If you need to put the air pump below the water level, please ensure to use the check valve to prevent water backflow..
ULTRA QUIET & LIGHTWEIGHT - Unlike traditional aquarium air pump, bedeeaerator for fish tank is driven by thin piezoelectric ceramic plate instead of the motor or other mechandism. Its working sound is lower than 35db, which is perfect to be placed in the bedroom, living room or office. The diameter of the fish tank bubbler pump is only 2 inches, which is very lightweight and space-saving..
LOW POWER CONSUMPTION - This aquarium pump adopts piezoelectric ceramic technology, power consumption is only 1.0W, with flow rate 0.5L/min, bedee mini fish tank pump keeps pumping air into your fish....
SKYTOU Dual Gauge CO2 Regulator, Keg Beer Regulator CGA-320 Inlet for Draft Beer Homebrew Kegerator Dispensing Regulator
❤【Double Gauge】: The top gauge (0-60psi) of this CO2 regulator shows you how much pressure is being provided to the kegs, the side gauge(0-3000psi) of this CO2 regulator shows you how much CO2 is left in your cylinder/tank..
❤【Compatible & Safe】: This CO2 regulator works with any CO2 tank with a CGA-320 valve. It comes with a CGA-320 Female thread and a shut off valve allows you to turn the gas flow on / off and prevents liquid from backing into the regulator..
❤【Premium Material】: The Draft Beer Dispensing CO2 Regulator adopts to food grade high-strength copper chrome decompression material and sturdy rubber boots that help protect them from damage. And Inside Safety Pressure Relief Valve springs also have high fatigue strength and durability..
❤【Easy To Install】: Slap this CO2 regulator on a food grade CO2 tank, connect a gas line ( ID 5/16' or 3/8”) and carbonator, and you have a lot cheaper carbonated water than buying carbonated water bottles directly..
❤【Suitable Occasions】: Particularly suitable in a Shop,Bar,Home,Out Door,Plants etc.....
Kegco BF STCK-5T Standard Tower Kegerator Conversion Kit with 5 lb Co2 Tank, Standard
PRO SERIES DUAL GAUGE REGULATOR: Easily measure PSI and CO2 volume and adjust CO2 output pressure using this Kegco 542 Pro Series Double Gauge Regulator packed with premium features. The top gauge indicates output pressure, while the side gauge tells you what's left in the CO2 tank, so you don't run out of gas during a party. The Standard plated brass body has a large pressure adjustment knob for easy use and includes a manual pressure release valve..
LEVER HANDLE KEG COUPLER: This NSF-approved Kegco KT85D-L "D" System Keg Coupler features a sturdy nickel-plated forged brass body with a stainless steel probe, and is designed for use with all domestic brand American D system Sankey kegs. The lever-handle design is easy to use.
simply pull out and then down on the handle to couple the keg. A 55-psi pressure relief valve makes this coupler even more convenient to use, allowing over-pressurized gas to escape before it enters your keg..
SINGLE FAUCET DRAFT BEER TOWER: Featuring a beautiful Standard-plated metal finish and a matching Standard-plated faucet with metal lever, this 3" diameter air-cooled draft beer tower is the same stylish tower used on most commercial grade kegerators. This tower conveniently includes 5 feet of clear beer tubing ending in a n....
Hitachi Pilot Unloader Check valve Combo for Gas Compressors 885426 EC2510E
Replaces Hitachi 885426 for EC2510E Gas Compressors 110 - 140 PSI Made in USA.
Check valve /Unloader valve / Pilot valve all in one - (continuous run unloader) for gas & electric powered air compressors.
110 - 140 PSI factory setting. pressure can be adjusted 30-40 psi up or down.
1/2" Metric Flare TOP Inlet x 3/8" Male Pipe Thread outlet to air tank.
30 scfm Rating ! Pressure can be adjusted 30-40 PSI Higher or Lower. If pressure adjustment is needed, Please see Pic attachment for adjustment instructions..