Class A Customs | Under Mount 30 Gallon RV Concession Fresh and Gray Water Holding Tank | UM-3000
30 Gallon Fresh or Gray Water Holding Tank Manufactured by Class A Customs - Made from NSF Approved Materials - Fresh & Drinking Water Safe - Can be used for Fresh or Gray Water Storage.
WATER TANK MEASUREMENTS: 48” Longest Length (not including fittings) x 8.5” x 20.5” - Tank can sit on any side - rotate tank to change height or width Average Thickness 7/32” +/- Please view photos. (Due to the manufacturing process +/- .25" on each measurement).
TANK BUILT-IN FITTINGS: (TWO) 1.5" Female NPT Fitting - fitting is sealed and water-tight, to use remove membrane with razor knife (TWO) .5" Female NPT Fitting - fitting is open DO NOT Over-tighten fitting damage will occur – Use plastic threaded fittings, metal threads may damage tank fittings.
NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process..
Great extra water storage in RV, pop-up camper, off-road vehicles, concession trailers, hot dog carts, smaller food vendors and portable hand washing sinks. Class A Customs Manufactures this item in the USA i....
Tool Daily Pressure Washer Adapter Set, M22 to 3/8 Inch Quick Connect, 3/4 Inch to Quick Disconnect, Male M22 Hose Adapter, 9-Pack
ATTENTION: M22 14mm female fitting has 14mm inside plug, If pressure washer needs 15mm, it will cause leakage. NOT FIT electric pressure washer of Sun Joe, Campbell, MI-T-M, AR Blue, Stanley, Cleanforce, Simoniz, Excell..
9-pack High power washer quick connect fittings include: 2-pieces Metric M22-14 female to 3/8’’ plug, 2-pieces 3/8’’ quick disconnect to M22 14mm male, 2-pieces 3/4’’ female to 1/2’’ quick connect, 2-pieces 1/2’’ plug to 3/4’’ male, 1-piece M22 14mm male to M22 14mm male..
M22 pressure washer quick connect fittings helps pressure washer hose quick connect to pressure washer pump or gun..
3/4″ Garden Hose Quick Connector Sets connect all 3/4″ standard garden hose to water inlet of power washer pump..
Pressure washer hose adapter has double M22 14mm male NPT ends. It converts the female M22 fitting of pressure washer hose to male M22 end. All high replacement couplers provide secure fittings and are convenient for frequent connection. Their working Pressure is rated to 5000 PSI..
Class A Customs | T-10000 | One (1) RV Fresh Water 100 Gallon Tank, Grey Water | Ribbed for Extra Support
100 Gallon Fresh or Gray Water Holding Tank Manufactured by Class A Customs - Made from NSF Approved Materials - Fresh & Drinking Water Safe - Can be used for Fresh or Gray Water Storage.
WATER TANK MEASUREMENTS: 50” Longest Length (not including fittings) x 18” x 26” - Tank can sit on any side - rotate tank to change height or width Average Thickness 7/32” +/- Please view photos. (Due to the manufacturing process +/- .25" on each measurement).
TANK BUILT-IN FITTINGS: (SIX) 1.5" Female NPT Fitting - fitting is sealed and water-tight, to use remove membrane with razor knife (TWO) .5" Female NPT Fitting - fitting is open DO NOT Over-tighten fitting damage will occur – Use plastic threaded fittings, metal threads may damage tank fittings.
NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process..
Great extra water storage in RV, pop-up camper, off-road vehicles, concession trailers, hot dog carts, smaller food vendors and portable hand washing sinks. Class A Customs Manufactures this item in the USA in ....
hygger Quiet Aquarium Sponge Filter with Biomedia Airtubing Electric Internal Fish Tank Filter for 10-30 Gallon Tank, 7W 100 GPH
...ebris while bio balls provide plenty space areas for the colony of beneficial bacteia.
【Ready-To-Go Aquarium Filter Kit】Quick set with all the necessary accessories come with, no air pump, no priming required. Just wash clean sponge and bio balls, install suction cups, connect aquarium filter with air tubing, plug in and go.
【Dead Silent】Powered by a 7 watt motor, aquarium internal filter runs as quiet as whisper. It cycles water at 100 gallons per hour, fast water flow is suitable for fresh or salt water aquariums, turtle tanks up to 30 gal.
【Venturi Aeration】This fish tank filter is equipped with a venturi nozzle to connect to an air tubing for improved oxygenation. Please put airtubing hang on outside of the tank. To slow down water flow, just remove the airtubing or the water pump and connect to an air pump. The directional flow nozzle allows for free rotation as desired..
【Clean Up Water Fast】Our fully submersible tank filter driven by 7w water pump, water goes from cloudy to crystal clear Within ONE DAY.
YOTOO Hybrid Air Hose 1/4-Inch by 25-Feet 300 PSI Heavy Duty, Lightweight, Kink Resistant, All-Weather Flexibility with 1/4-Inch Industrial Quick Coupler Fittings, Bend Restrictors, Blue
Blended rubber and PVC air hose is heavy duty, lightweight,flexibility,abrasion resistance and all weather use..
Equiped with 1/4” industrial NPT fittings and quick coupler for directly connect to air compressor and air tools. No need to buy seperately air fittings..
Bend restrictors reduce kinking and help to increase the life of the air hose.
Hybrid air hose is 1/4 INCH inner diameter by 25 FEET long delivers up to 300 PSI for maximum working pressure, 1200 PSI bursting pressure..
Class A Customs | Under Mount 30 Gallon RV Concession Fresh and Gray Water Holding Tank & Plumbing Kit | UM-3000-BPK
30 Gallon Fresh or Gray Water Holding Tank Manufactured by Class A Customs - Made from NSF Approved Materials - Fresh & Drinking Water Safe - Can be used for Fresh or Gray Water Storage.
WATER TANK MEASUREMENTS: 48” Longest Length (not including fittings) x 8.5” x 20.5” - Tank can sit on any side - rotate tank to change height or width Average Thickness 7/32” +/- Please view photos. (Due to the manufacturing process +/- .25" on each measurement).
TANK BUILT-IN FITTINGS: (TWO) 1.5" Female NPT Fitting - fitting is sealed and water-tight, to use remove membrane with razor knife (TWO) .5" Female NPT Fitting - fitting is open DO NOT Over-tighten fitting damage will occur – Use plastic threaded fittings, metal threads may damage tank fittings.
NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process..
BASIC PLUMBING KIT INCLUDES: (TWO) 0.5” Hose Barb to 0.5” Male Pipe Thread Adaptor (FOUR) 0.5” Hose Clamp (ONE) 1.25” Hose Barb to 1.5” Male Pipe Thread Adaptor (TWO) 1.5” Hose Clamps (ONE) 1.5”....
YOTOO Hybrid Air Hose 3/8-Inch by 50-Feet 300 PSI Heavy Duty, Lightweight, Kink Resistant, All-Weather Flexibility with 1/4-Inch Brass Male Fittings, Bend Restrictors, Red
EXCELLENT MATERIAL: This air hose is blended rubber and PVC air hose is heavy duty, lightweight, flexibility,abrasion resistance and all weather use..
EASE TO USE: Equiped with 1/4” industrial NPT fittings and quick coupler for directly connect to air compressor and air tools. No need to buy seperately air fittings..
BOTH ENDS INSTALLED BEND RESTRICTORS: Bend restrictors reduce kinking and help to increase the life of the air hose.
HIGH STRENGTH: 3/8 INCH inner diameter by 50 FEET long delivers up to 300 PSI for maximum working pressure, 1200 PSI bursting pressure..
YOTOO Hybrid Air Hose 1/4-Inch by 50-Feet 300 PSI Heavy Duty, Lightweight, Kink Resistant, All-Weather Flexibility with 1/4-Inch Industrial Quick Coupler Fittings, Bend Restrictors
EXCELLENT MATERIAL: Blended rubber and PVC air hose is heavy duty, lightweight,flexibility,abrasion resistance and all weather use..
EASE TO USE: Equiped with 1/4” industrial NPT fittings and quick coupler for directly connect to air compressor and air tools. No need to buy seperately air fittings..
BOTH ENDS INSTALLED BEND RESTRICTORS:: Bend restrictors reduce kinking and help to increase the life of the air hose.
HIGH STRENGTH:: Hybrid air hose is 1/4 INCH inner diameter by 50 FEET long delivers up to 300 PSI for maximum working pressure, 1200 PSI bursting pressure..
Class A Customs 40 Gallon RV Waste Black Water Holding Tank WT-4000
40 Gallon RV Waste Water Holding Tank MADE IN THE USA by Class A Customs using Medium Density Polyethylene (MDPE) Resin TANK NOT FOR FRESH OR DRINKING WATER USE – WASTE/GRAY WATER USE ONLY – Used in RV’s Campers, Trailers, Motorhomes and Tiny Houses.
INSTALLED OUTLET 3” ABS Female Pipe - outlet can not be moved DO NOT over-tighten fittings damage will occur Dump valves do not hook directly to the 3" ABS fitting, from the outlet run PVC or ABS piping (not included), dump valve (not included) is added to the piping..
INLET & VENT INSTALLATION Class A Customs Black Water Tanks only come with the outlet the end user will determine where the inlet and vent will need to be placed and install, hardware NOT included. TANK MUST BE VENTED allowing air in and out when in use. *DO NOT PRESSURIZE TANK* DO NOT over-tighten fittings damage will occur..
NOT INCLUDED Inlet and Vent Fittings / Additional Fittings / Hardware / Mounting Hardware / Dump Valve / Piping NOT INCLUDED.
Class A Customs 27 Gallon RV Waste Black Water Holding Tank WT-2700
27 Gallon RV Waste Water Holding Tank MADE IN THE USA by Class A Customs using Medium Density Polyethylene (MDPE) Resin TANK NOT FOR FRESH OR DRINKING WATER USE – WASTE/GRAY WATER USE ONLY – Used in RV’s Campers, Trailers, Motorhomes and Tiny Houses.
INSTALLED OUTLET 3” ABS Female Pipe - outlet can not be moved DO NOT over-tighten fittings damage will occur Dump valves do not hook directly to the 3" ABS fitting, from the outlet run PVC or ABS piping (not included), dump valve (not included) is added to the piping..
INLET & VENT INSTALLATION Class A Customs Black Water Tanks only come with the outlet the end user will determine where the inlet and vent will need to be placed and install, hardware NOT included. TANK MUST BE VENTED allowing air in and out when in use. *DO NOT PRESSURIZE TANK* DO NOT over-tighten fittings damage will occur..
NOT INCLUDED Inlet and Vent Fittings / Additional Fittings / Hardware / Mounting Hardware / Dump Valve / Piping NOT INCLUDED.
