Best Air Tool Fittings

NEIKO 30252A Water and Oil Separator for Air Line | 1/4' NPT Inlet and Outlet | 90 PSI | Air Compressor and Air Tool Accessory | Protect Lifespan of Pneumatic Tools | Water Moisture Filter Dryer

  • ...e conveniently located to removed anything trapped inside..
  • SPECIFICATIONS: Each in line air compressor moisture filter comes with a 1/4” NPT inlet and outlet for any standard air hose with a quarter inch fitting and can handle pressure to 90 pounds per square inch. Durable aluminum housing construction with brass fittings..
Check Stock

4 Pieces 1/4 Inch NPT 360 Degree Swivel Air Hose Connector 1/4 Inch Swivel Air Plug Air Fittings Connectors Portable Air Tool Plug Male Thread Female Thread Household Industrial Coupler and Plug

  • 360 Degree rotation: both male air hose connectors adopt 360 degree swivel design, which would not break the air hose, and prevent the hose from kinking, keeping the air line from getting tangled and twisted and increasing the maneuverability.
  • Widely applied: there are two connections of 1/4 external rotation and 1/4 internal rotation on the NPT swivel fitting, suitable for 1/4 inch male NPT and 1/4 inch female NPT, which can be applied to standard threaded fittings and most common applications at home.
  • Practical function: this swivel air hose connector can be applied in the air inlet of the spray gun or pneumatic tool, providing an unhindered air path and improving flexibility between the hose and the pneumatic tools.
  • Quality material: this air line swivel fitting is made of aluminum, solid and reliable, featuring strong corrosion resistance and rust resistance, which can offer you a long service life.
  • What you get: you will get 2 pieces of 360 degree swivel air tool plugs and 2 pieces of 360 degree universal hose swivel connectors, which can be applied together to avoid you buying twice separately.
Check Stock

HaSaoMoi Air Brake Line Fitting, DOT Brass Push in Fitting, Push to Connect Union Fittings Air Brake Union 1/4" Tube OD for Trucks Trailers andIndustrial Use (4 Pack)

  • 【PREMIUM MATERIAL】:Our push in fittings are made of high quality CA360 brass,Certified by DOT and Air Brake system Requirements,with corrosion resistance, high temperature ductility and low permeability. Great for long time use, dot air brake fitting pneumatic fittings type: 1/4".
  • 【TYPICAL APPLICATION】:The air brake fittings assortment kit can be used with air systems, copper tubing in air lines brake systems, which is perfect for automotive car or truck repair,air operated seats, operating gauges, air horns, heater controls, industrial workshops, daily garden or lawn mower repair, towing machine hose connection and air brake connections ..
  • 【EASY TO BE INSTALLED】: Union connect two tube with same OD. All quick connect fittings can be sealed by pushing the tube firmly into the fittings and they are also simple to be removed from the tube..
  • 【MAX PRESSURE】: Working pressure from vacuum to 250 psi. Temperature Range: -40° F to +200° F(-40°C to +93°C)(Note: see tubing manufacturer’s recommendations for pressure and temperature mutations).
Check Stock

HALARON Mini Grease Gun-Portable Multipurpose 1000PSI Output Pressure and 80C.C. Capacity, Needle Nozzle Mini Tool for Greasing BB, Headset Bearings, Pedals & Hubs, Bicycles, Small Accessories (1PC)

  • Portable design:Mini Grease Gun features a needle nozzle design perfect for lubricating small fittings and devices. Equipped with a spring-loaded push button design, the compact size and 3-ounce capacity are easy and convenient..
  • Wide Applications:The Push mini grease gun is the solution you need for quick greasing on small fittings and moving parts, perfect for lubrication air tools including impact wrenches, etc.
  • The easing tool with 1000PSI output pressure and 80C.C.capacity, mainly used for , mechanics, apprentices, cycling, or automotive enthusiast..
  • No Leak:high-pressure grease tool equipped with deepened thread design, strong sealing, no oil leakage, easy and convenient knob..
  • Reliable And Effective: Users trust Halaron to be a quality tool. You are backed by our Performance Assurance Limited Lifetime Warranty. If you have any issues with your Halaron Push Type Grease Gun.
  • High-Quality Guarantee: Our aim is to provide the best product and top customer service to every buyer's friends. If there are any concerns with the product, please do not hesitate to contact us within 30 days, and we will give you a replacement or return and a full refund..
Check Stock

Robinair 18560 A/C and Refrigeration Valve Core Remover/lnstaller

  • Robinair Air Conditioning Valve Core Remover and lnstaller - the ideal tool for replacing damaged valve cores or performing A/C or refrigeration service that necessitates valve core removal.
  • Attaches to 1/4 inch male flare access fittings and allows valve core removal and replacement without loss of refrigerant.
  • Durable, solid brass tool has a ball valve that can be opened and closed in just a quarter-turn, rather than a slower to operate stem-type valve.
  • Ball valve features a corrosion resistant stainless steel ball for smooth action and a reliable seal.
  • Durable brazed side fitting allows system access for various A/C service procedures.
Check Stock

NOVINO Grease Zerk Fitting Tools Fits 1/4"-28 SAE,1/8"-NPT, M10x1 M8x1 and Grease Zerk Fittings with hex Size 3/8" 5/16" 7/16",Multi-Tool for Remove Install Rethread Damaged Broken Zerk Grease Fitting

  • 2 set Heavy-Duty alloy steel galvanize grease zerk tool. One fits for 1/8"-NPT PTF grease zerk fitting, M10x1 and grease zerk fittings with hex size 3/8" (9.5mm) & 7/16" (11mm). One fits for Fits 1/4"-28 SAE, M8x1 and Zerk fittings with hex size 5/16" (7.85mm) & 3/8" (9.5mm).
  • A must have grease fitting multi-tool: 4 tools in one grease zerk kit---install,remove,re-tap holes( repair 1/8"& 1/4"-28 tap thread) and maintain zerk grease fittings .Make job more easier and save time..
  • Function 1---Remover and Installer. The silver sockets are grease fitting removal & install tool,used to removal damaged broken grease fittings OR install straight and angle grease zerk fittings( 30, 45, 65, 90 degree angles ).
  • Function 2---Thread Cleaner and Restorer.The black taps on the cross ends are grease fitting cleaning tool ,designed to clean out the threads of a clogged fitting and retreading repair correct fitting thread..
  • Wide use:Our grease zerk fitting tool kit is designed to meet requirements on tractor/loader/lawn mower/excavator/rotary ....
Check Stock

Happybuy PEX Tubing Oxygen Barrier - 2 Rolls of 1/2 Inch X 300 Feet Tube Coil - EVOH PEX-B Pipe for Residential Commercial Radiant Floor Heating Pex Pipe (1/2\ O2-Barrier, 2x300Ft/Red+Blue)

  • ...on. Heating system's service time can be greatly lengthened. Smooth inner pipe, anti- scaling quality, increase heat dissipation efficiency & speed for energy-saving..
  • Effortless Installation: Compatible with different connection system & floor type, such as: Crimp connection system (crimp tool + crimp rings + crimp fittings).
  • Cinch (clamp) connection system (cinch tool + St. steel clamps + crimp fittings).
  • Premium Flexibility: Min.5" bending radius, easy to bend for different ground situation. Big pressure capacity: 80psi @ 200℉, 100psi @ 180℉, 160psi @ 73℉. Thus to ensure its good temperature resistant, crack- & leakage-proof..
  • Diverse Use Scenario: Suit for home & commercial use, like: radiant floor heat system, solar water heater system, central air-conditioning piping system etc. Structural concrete slabs, Non-structural slabs, Staple-up (between joists) radiant floor heating with and without heat transfer plates, "Sandwich" type radiant heating (between sub floor and finished floor), Snow & ice melting systems etc..
Check Stock

Winterize RV, Motorhome, Boat, Camper, and Travel Trailer: Air Compressor Quick-Connect Plug To Male Garden Hose Faucet Blow Out Adapter with Valve (Lead-Free Brass)

  • ...es (RV), motorhome, camper, boat, watercraft, and travel trailer by blow out method. This is a safer, healthier, and environmentally friendlier winterization tool when compared with those winterizing kits that use antifreeze..
  • Flexible hose allows the adapter to access tight spaces and minimizes stress on pipes and fittings. Pre-assembled length: 11.5 inches approx. Pressure rating: 250 psi. 100% outdoor rated, virtually indestructible, impervious to water and oil..
  • Hose: Flexible Reinforced Synthetic Rubber, water and oil resistant (Insta-Grip hose, made in USA).
  • For your health and safety, the fittings are made of lead-free brass, certified to contain less than 0.25% lead. Always wear safety goggles when handling or using compressed air..
  • This winterization tool is made from the highest quality parts. The shut-off valve is made from forged brass (not brass casting) for extra strength and durability. If you are looking for a heavy duty tool that lasts a lifetime, this one is for you! This blowout adaptor may also be used to winterize sprinkler system, drip irrigation system, soaker hose, spigot, faucet, sillcock, water garden hose and hose bibb where applicable. Assembled in Wichita, Kansas, USA with domestic and foreign parts..
Check Stock

DOT Brass Air Line Quick Connect Fittings Assortment, 34 Pcs DOT Push to Connect Air fittings 1/4" 3/8" 1/2" Air Fitting Kit with 1/4" Schrader Valve Air Line Fittings for Trucks or Industrial

  • 【PREMIUM MATERIAL】:Our dot push to connect air fittings are made of high quality CA360 brass, meet D.O.T. FMVSS 571.106, SAE J1131 with corrosion resistance, high temperature ductility and low permeability. Long service time, air brake fitting assortment type: 1/4", 3/8", 1/2"..
  • 【TYPICAL APPLICATION】:The dot air line quick connect fittings can be used with air suspension systems, copper tubing in air lines brake systems, perfect for truck /RV repair air line leak, also perfect for industrial workshops, daily garden or lawn mower repair, towing machine hose connection and so on..
  • 【EASY TO INSTALL】:Pre applied red sealant for male thread for better sealing. All brass quick connect air fittings can be sealed by pushing the tube firmly into the fittings, simply depress button to remove tubing..
  • 【MAX PRESSURE】:Working pressure from vacuum to 250 psi. Temperature Range: -40° F to +200° F(-40°C to +93°C)(Note: see tubing manufacturer's recommendations for pressure and temperature mutations).
  • 【ALL IN ONE SET】: Unique DOT Air Brake fit....
Check Stock

100 Pieces Air Hose Fittings Air Line Fittings Straight Push to Connect 4 6 8 10 12 mm Quick Release Pneumatic Connectors Plastic Straight Tube Connector Push to Connect Fittings for Tube

  • Reliable Material to Serve: tube fittings are made of quality PU and plastic, with high pressure resistance, hard to trip out, not easy to deform or break, suitable for long lasting use.
  • Easy to Use: you will get 100 pieces of air hose connectors, which are easy to install or remove, with the push in design to connect the tube easily, quick and safe, the enough quantity will suffice your spare parts needs.
  • Flexible and Straight: air line fittings are flexible and simple to rotate as needed, with ellipse ring design, no other tools needed, just give a little push, time saving and energy saving.
  • Wide Applications for You: air fittings are suitable for many usages, such as industries automatic production equipment, like machinery, automobile, electronics, packaging, and so on, bringing a fluent use experience.
  • Proper Size to Fit: the 100 pieces air hose connector fittings are in 5 diameters, 20 pieces for each diameter, and the diameters include 1/4 inch, 5/32 inch fittings, 5/16 inch, 3/8 inch and 1/2 inch fittings, to meet your various demands and assorted applications.
Check Stock