#120 Aluminum Oxide - 8 LBS - Fine Sand Blasting Abrasive Media for Blasting Cabinet or Blasting Guns.
IDEAL SURFACE TREATMENT: The pressure sandblasting can perfectly handle the surface of large workpiece, suitable for the high density surface treatment requirements.operating pressure can be achieved 125 psi.
STURDY WELDED STEEL TANK: Sturdy welded steel tank, highly efficient and durable. the powder coating can resist rust and corrosion, this sand blaster is unlikely to be deformed and damaged，98 " long hose with check valve，more flexible.
GAS-WATER SEPARATOR: Gas-water separator can keep the drying of sandblasting in the barrel and meet higher requirements of sandblasting,Since wet sand tends to clog,our sand blaster can make sure the the compressed air stays dry to prevent clogging.
QUICKLY REMOVE: Pressutized design 30% more sandblasting power than siphon units ,this sand blaster is designed for outdoor large jobs, can remove rust from outdoor iron frames, statues and other immovable objects, remove car paint and marble inscriptions, etc.
RUBBER WHEEL AND HANDLE DESIGN: Equipped with handle is bending Angle in line with human comfort design and two 6" rubber wheels that allow easy movement of the machine while working.
HIGH-QUALITY FABRIC FEATURES: Vehicle specific design and factory airbox adaption fitment. Tested and verified on an airflow bench, each ARMAX design ensures that the airflow through the snorkel meets or exceeds that of the factory inlet Unique design. Finally, air ram design acts as a highly efficient water separator to remove rain water form incoming air stream..
UV STABLE CROSS LINKED POLYETHYLENE MATERIAL: Manufactured using durable, UV stable cross linked polyethylene material. Crosslinked polyethylene has the advantages of high temperature resistance, excellent dielectric strength, and favorable mechanical properties. Water and corrosion resistant makes the snorkel highly durable and lasting piece of art. 10% higher CFM for this application over other brand snorkels, designed for maximum dust and water sealing..
"V-SPEC TECHNOLOGY: Safari Snorkel V-SPEC system relocates your engines air intake point from the relatively low and vulnerable position under the hood to a much higher and safer location where a constant source of cool, clean, dry air is available. The V-Spec range are made from Industrial Spec UV Stabilized Polyethylene, safari snorkels are incredibly resilient and UV stable. Install one before your next trip and breathe eas....
XWS-3002 XL – Our New more efficient Extreme Water Separator is rated @ 2 microns absolute. The reason our water separator no longer has a drain is....
PF-3001 XL- New Particulate Filter is rated @ 144 microns..
The 144 Micron Particulate Filter on the suction side will drastically reduce cavitation.
Lower the sound output of the FASS System, and removes larger fuel particulates..
1 Inline Compressed Air Regulator Filter Desiccant Dryer Moisture Separator 4 Stage In Line Air Filtration System
1:" Inline Compressed Air Regulator Filter Desiccant Dryer Moisture Separator Trap Combo Inlet / Outlet: 1"" Female NPT (measures about 1" diameter) This is a directional flow unit that comes which markings showing how to install. 3 Stage Compressed Air Filtration 5 Micron (Removes Water Droplets / Debris) .01 Micron Oilesser (Removes Finer Droplets / Oil Droplets / Oil Aerosol) Desiccant Dryer (Removes Any Remaining Moisture / Vapor).
1ST STAGE OF PRE-FILTER WITH 5UM FILTER ELEMENT TO REMOVE OIL, WATER & PARTICLES.
2ND STAGE OF MICRO-FILTER WITH 0.01UM FILTER ELEMENT TO REMOVE 99.99% PARTICLES AND OIL..
3RD STAGE OF DRYER WITH DESICCANT TO ABSORB THE LEFT WATER..
HPDMC Oil-Free Hookah Dive System Third Lung Serface Vacuum Pump for Snorkeling (550W)
2.0cfm, Type: Oil-free pump, no need any lubricate oil to take in, Receiver tank: 10 liters stainless steel..
Working process: Atmosphere air is sucked into cylinder of the compressor, and compressed to reach 0.3mpa – 0.8mPa / 40 psi – 110 psi pressure, through regulator with water separator , then purified by filter. Discharge clean air for diving breathing..
Filtration for breathing air (Active carbon filter): The outlet air purification depends on the activated carbon and molecular sieve, so filter elements must be replaced periodically, especially for breathe purpose. The deepest working distance is up to 30 meters for one hose.
10-15 meters for both if connects to two hoses..
Direct driven type compressor: This air compressor is the main body of the electromechanical air source device. It is the device that converts the mechanical energy of the primary motion (usually the motor) into the gas pressure energy, and is the pressure generating device for compressed air. The pump block unit is composed of crankcase, crankshaft, cylinder, piston, intake and discharge valves, connect rod , bearing etc..
Application: Widely used in Kayak Dive, Hookah Dive, Long Hose Gauge Scuba Diving, Commercial Boat Cleaning, Pool Clea....
1/4 Inch Air Adjusting Regulator Valve with Pressure Gauge and Water Trap Filter, 2 Packs, Oil Separator Water Pressure Regulator Air Compressor Regulator for Air Spray Paint Gun Air Pressure Cleaner
Small integration: you will receive 3 packs of air adjusting regulator valves, each including 3 parts, which are black part for air pressure regulators, blue part for water filter and the last part for stainless steel adapter.
Separating impurities: the transparent filter bowl allows a visual inspection of cumulative water and can filter airborne solid residues through a spring loaded valve at the bottom, such as pipe scale, rust, condensation from airlines.
Keep paintwork clean: air inlet measuring 1/4 inch and the overall length of 5.9 inch, the air compressor water separator kits fit into the paint gun and air compressor to prevent water, oil and impurities from polluting your painting work.
Safe and practical: with pressure regulator, you can see the working tool pressure clearly.
The sealing tape can be applied on thread part for nice prevention of air leakage.
Cleaning air passing through the pneumatic tools can extend the tool life span to some extent.
Wide applications: the air adjusting regulator valve is suitable for most spray tools and airlines, such as spray paint gun, air pressure cleaner, airline dryer and so on, which can be applied as a compact filter for air spray guns.
Sand Blaster Abrasive Blaster Portable Power Sand Blasting Kit for Removing Paint, Stain, Rust, Compatible Pressure Sand Blaster (Blue)
IDEAL SURFACE TREATMENT: The pressure sandblasting can perfectly handle the surface of large workpiece, suitable for the high density surface treatment requirements.operating pressure can be achieved 125 psi.
STURDY WELDED STEEL TANK: Sturdy welded steel tank, highly efficient and durable. the powder coating can resist rust and corrosion, this sand blaster is unlikely to be deformed and damaged，98 " long hose with check valve，more flexible.
GAS-WATER SEPARATOR: Gas-water separator can keep the drying of sandblasting in the barrel and meet higher requirements of sandblasting,Since wet sand tends to clog,our sand blaster can make sure the the compressed air stays dry to prevent clogging.
QUICKLY REMOVE: Pressutized design 30% more sandblasting power than siphon units ,this sand blaster is designed for outdoor large jobs, can remove rust from outdoor iron frames, statues and other immovable objects, remove car paint and marble inscriptions, etc.
RUBBER WHEEL AND HANDLE DESIGN: Equipped with handle is bending Angle in line with human comfort design and two 6" rubber wheels that allow easy movement of the machine while working.
