Facmogu Silver L-Rod Cowbells Clamp Cowbell Percussion L-Rod Holder for Cowbell Accessory Drum Set Adjustable Cowbell MountIng Bracket Clamp for Drum Musical Instrument Accessory
【Premium Material】-- The Facmogu L-Rod Clamp is constructed from superior stainless steel that resists corrosion and rust well. Whether you play in your bedroom or are continuously playing performances, this L-Rod Clamp will provide you years of trouble-free use..
【Optimum Security】-- With sturdy, reliable security, this L-Rod Clamp fastens drums and accessories all around the drum set. Each clamp has a dependable mounting capacity without backing out under high-impact play thanks to the strengthened clamping jaws and wing-bolt. It means all you have to do to get the L-Rod to stay precisely where you want to place it, then connect it and tighten it..
【Ideal for Gigging & Casual Drummers】-- Ideal for any drummer looking to expand their drum kit, the Facmogu Multi-clamp will deliver a thorough grip throughout use. Facmogu Multi-Angle "L" arm and clamp offers all drummers and percussionists one of the best and most affordable percussion mounting arms on the market. Drummers know that the right hardware can help them reach new heights of playing prowess..
【Easy Application & Removal】-- Setting up one more supports for each drum component may be time-consuming. This percussion mount features an adjustable holder with a quick rele....
21 Rods Aluminum Brazing Rod Low Temperature, Aluminum Welding Rods for Propane Torch, Flux Core Welding Wire for Alu, Alu Alloy, Aluminum Repair, 1/16\ X 16.93\ (1.6 mm)
MATERIAL: 21 Rods 1/16" x 16.93" aluminum brazing rods are included in the package. The chemical composition of the brazing rods: Si 12%, Mg≤0.10%, Fe≤0.80%, Cu≤0.03%, Zn≤0.20%, Mn≤0.15%, AL balance. Welding flux core 18%..
ADVANTAGES: Brazing temperature range: 716-752°F. Solidus: 716°F, Liquidus: 752°F. Tensile Strength ( RM): 130N/mm². The aluminum soldering rods has good fluidity during welding, strong caulking, and can flow into small spaces..
PACKAGING: Cloud Fire welding rod packaging has been optimized, and it is packaged in a sealed tube, which can effectively reduce the occurrence of moisture and other events compared with other packaging. The caps at both ends can be opened for easy storage and use..
APPLICATION: Aluminum welding rods for propane torch is suitable for leak welding of aluminum ship bottom, fuel tank, condenser.
crack repair of aluminum alloy engine block, base, gearbox, aluminum parts. Notice: It is not suitable for cast iron welding..
SERVICE: When you have a problem in the process of using the welding rod, please do not hesitate to contact us immediately, we will solve all problems for you. And we look forward to getting your suggestions on the welding rod, we will continue to improve the products and serve you ....
HOIGON 2 Pack Double Handle Corner Clamp, 90 Degree Right Angle Corner Clamp with Adjustable Swing Jaw Aluminum Alloy for Woodworking, Welding, Framing
...mping range of 2.56 inches, our double handle corner clamp comes with anti-skid rubber handles and adjustable jaws for fast clamping wooden, glass, metal or plastic pieces together at 90 degrees..
WIDELY USES - 2-pack 90 degree right angle clamps are suitable for drilling, welding, framing, or doweling to make cabinets, boxes, photo frames, canvas frames, aquarium, etc. A gift for woodworkers, gardeners, mechanics, handymen and DIY'ers..
BUY WITH CONFIDENCE - After you receive the double handle right angle corner clamp. If you dislike or have any problems with them, please contact us in feel free. You can get a 30-day worry-free refund and we will reply to you the first time..
PURPOSEFUL: Get rid of constant frustration with the steam iron cord constantly interfering with your ironing board, iron rest, material, or feet. A....
EASY TO USE: Simply place the screw clamp on the side of your ironing board, or nearby surface, and securely tighten. The ironing board cord glides....
ROD FOLDS FLAT: When finished, the cord minder can remain attached to your board by folding the rod flat, parallel with the ironing board for easy....
Silver Brazing Rod BCuP-5 20 Flat Bar Welding Stick JAgP-15 15% Silver Phos Welding Rods 0.050 x1/8 x14 for Air-conditioners Refrigerators and Freezers
Material: The package includes 20PCS 15% Silver Brazing Rods BCuP-3.Silver (Ag) 4.8-5.2%.
Copper (Cu): Rest. For the best results..
Standard: The BCuP-5 silver brazing rod containing 15% silver, is equivalent to the American standard AWS BCuP-5 national standard BCu88PAg and L205. It has certain plasticity and is suitable for welding of copper and its alloy joints that cannot maintain a tight fit. Melting point 645-815 degrees Celsius..
Advantage: The low temperature phosphor silver welding rod is easy to install and remove. Good fluidity during welding, can flow into small space. Low metling point 704-816℃, good fluidity during welding, molten metal can flow to small gaps.
Application：The brass brazing rod is used for brazing of silver & silver alloy in motors, air-conditioners, meters, and refrigeration industry,Widely used in brazing of copper and copper alloys in electrical machinery, electrical appliances, glasses and other industries.
Service: Fox Alloy Time-proven formulation.
A team of experienced welding engineers ready to answer all your welding questions.
Electrode Holder 500 Amp Welding Electrode Holder Set, Heavy Duty Jaw Holding Plier Electrode Clamp for Arc MMA Welder,Black
【High Quality Welding Electrode Holder】The upper and lower clamps of the electrode clamp are made of high copper alloy for maximum conductivity and strength. High quality electrode holder with 500A current capacity, comfortable insulated handle, convenient and easy to operate. Ideal for most arc, MMA, hand welding work.
【Heat-resistant insulation for Safety】The handle is molded from a durable glass-filled nylon material for good heat and impact resistance. Glass-filled nylon handle and clamp insulated for maximum operator protection and safety.
【Groove Jaw Design】The grooved jaw for firm grip of rods in 45°, 90°, 135°, 180° positions. Clamping Device holds the stick electrode tight so it will not slip while welding and transfers the welding current to the stick electrode.
【Welding Chipping Hammer & Wire Scratch Brush】Welding chip hammer is made of high strength and toughness steel. Dual-headed design, one end is flat chisel, the other end is pointed chisel, convenient operation in narrow space.Coil spring handles reduce vibration and improve comfort. The wire brush is made of stainless steel bristles and with wooden handle, they are durable and have a strong cleaning ability..
【Work Great】Which are easy to remove and clean corrosi....
BAYTORY Upgrade Magnetic Welding Support Ground Clamp Tools, Welding Magnet Head Strong Magnetism Large Suction, Copper Tail Welding Accessories Stability Clamps
Check out this handy Fix-tite Magnetic Welding Ground Clamp. A device that speeds up grounding chores for welders..
NO-HASSLE SAFETY SETUP - You no longer have to waste your time finding, placing or removing a ground point for a welding job. This device serves as the ground point, which you can take with you anywhere. Simply tack this onto a convenient spot, hook up your safety wire and you're ready to weld..
STRONG MAGNETIC GRIP - This magnetic clamp attaches easily to any smooth metal surface, flat or curved. It holds on tightly, without budging easily. Now that you've got this, you won't have to take minutes searching for a good ground or attaching grounding tabs..
OFFERS CONVENIENCE - Sometimes you're faced with a welding job that has limited options for ground points. You don't want to have to damage a car's paint job simply to affix a safety line. This magnetic clamp is handy to have in such situations. You can stick in on a car body and not have to damage the paint. The clamp can also be attached to metal poles, struts, railings or the welding table..
Material: Copper / insulation board. Durable and solid.With copper tail with good welding stability..
KEILEOHO 6 Pack 11 Inches C Clamp Locking Pliers with Swivel Pads Heavy-Duty Locking Pliers Woodworking Clamps Set Adjustable Nickel Plated C Pliers
6 PCS VALUE PACK - This welding clamp tools set includes 6 heavy-duty C-clamps with sizes of 11 inches, all are made of high-quality nickel-plated alloy steel, which makes them durable and robust, and feature wide opening jaws for greater versatility in clamping a variety of shapes..
ADJUSTABLE & SWIVEL PADS - Our adjustable wood working locking pliers provide the versatility of standard locking pliers. Simply turn the screw to adjust the grip, which stays adjusted for repetitive use. Swivel pads hold tapered work, awkward fabricating jobs, and delicate projects without damaging the work surface..
PREMIUM MATERIAL - Built with nickel plated alloy steel, these C-clamp locking pliers are designed to be the hardest working tools in your kit. With professional clamping force that won't slip along with forged and hardened alloy steel jaws, our C-clamp welding tools are durable and built to last..
TORQUE LOCK DESIGN - Anti-pinch ergonomically designed handles of the C-clamp locking pliers provides comfortable using experience. The contoured handle aids in the torque-lock design, resulting in a secure hold. The hardened wide jaws with better grip force on jobsite material, suitable for wood working, welding and more..
WeldingCity 100-ft 2-AWG USA-made Heavy Duty Welding Cable Highly Flexible Durable EPDM Rubber Jacket 600V -50C-105C Black
USA-made 2 AWG heavy duty welding cable (EPDM rubber jacketed black cover) for use where maximum flexibility and resistance to cuts, tears, abrasion is required. Max volt 600V, -50C to 105C. Resistant to chemicals, oils, and acids and is also weather, ozone and sunlight resistant. Available welding cable sets: welding cable only.
cable set with terminal lugs and cable set with Dinse connectors..
Welding Cable Set With Terminal Lug includes: 2-AWG USA-made welding cable at selected length, one 300-amp stick electrode holder with accessory kit, one 300-amp ground clamp and three zinc-plated copper terminal lugs (1/2" stud hole)..
Welding Cable Set With Dinse Plug includes: 2-AWG USA-made welding cable at selected length, one 300-amp stick electrode holder with accessory kit, one 300-amp ground clamp, one zinc-plated copper terminal lug (1/2" stud hole) and two Dinse-type 35-50mm male connectors..
Heavy duty 300-amp stick electrode holder with strong jaw spring.
both upper and lower jaws made of copper (brass) with increased operator comfort. Zinc-plated steel 300-amp work clamp with strong spring, copper plated jaw, copper braid, copper plated hex screw for secured cable connection. Dinse-type twist-lock cable connector (male) with heat and oil resis....
