Best Alloy Carbon Steel Pipe

EVIL ENERGY 3 Lap Joint Exhaust Band Clamp Preformed 304 Stainless Steel

  • Joins 3.0 inch OD Pipe to 3.0 inch ID Pipe. Lap joint exhaust clamp is a simple, effective way to connect heavy-duty exhaust system components such as....
  • Connection Type: ID-OD slip fit connection, preferably with compression slit. This lap joint clamp commonly to join different size pipe..
  • Distributes the clamping force evenly over the entire 360° to provide tight sealing and prevent leaks and prohibit exhaust pipe distortion..
  • Material: 304 stainless steel strap, zinc-plated flange bolt and nut, steel gasket, aluminum alloy I-block. Lap Joint band clamp requires that the....
  • EVIL ENERGY provides stainless steel exhaust clamp 3-month warranty. We value your shopping experience and strive to offer a high-quality product and....
Check Stock

NETAMI Carbon Fiber Exhaust Muffler Tip Clamp-on 2.25 to 3.5 inch (Purple)

  • Made of High 304 quality stainless steel with carbon Fiber finished.
  • Real Glossy Carbon Fiber with UV protction will never Fade or Rust.
  • Come with a Custom Clamp, fits over 2-1/4" stock pipe.
  • Please measure your factory pipe before place the order.
Check Stock

Drill America - DWTPT1/8-1SET 6 Piece NPT Pipe Tap, Carbon Steel, DWTPT Series Set, 1/8\

  • Carbon steel pipe taps are designed to clean and or re-thread damaged or jam pipe threads.
  • Also called 'pipe taps', National Pipe Taper (NPT) taps are appropriate for threading a wide variety of materials both ferrous and non-ferrous..
  • The nominal size of a Pipe Tap is that of the pipe fitting to be tapped, not the actual size of the tap..
  • The thread tapers 3/4 of an inch per foot. All Pipe Taps furnished with a 2-1/2 to 3-1/2 thread chamfer..
Check Stock

8MILELAKE Exhaust Tail Pipe Cutter, 3/4 Inch to 3 Inch Universal Tube Cutting Pliers Carbon Steel Chain Exhaust Cut Off Tool 15 Blades for cutting tailpipes and exhaust pipes both on and off the car

  • 【APPLICATION】The exhaust tail pipe cutter is designed for cutting tailpipes and exhaust pipes both on and off vehicle use. Use tool to cut copper, PVC, iron pipe, etc with diameters of 3/4 to 3 inches (19-76mm).
  • 【HIGH QUALITY】The chain muffler pipe cutter is made of high quality carbon steel, the surface has been anti-rust treatment and strict testing methods, strong , sturdy and durable, not easy to damage.The ergonomically non-slip handle of the exhaust and tailpipe tube cut off tool is made of plastic and steel and is comfortable while cutting..
  • 【HIGH PERFORMANCE】Universal carbon steel tubing cutter features with 15 blades to cut pipe quickly and effectively. Each roller has a cutting wheel that provides smooth tracking, so only a quarter turn is needed for complete cut..
  • 【PERFECT DESIGN】The exhaust tailpipe tube cutting Pliers works well in areas that are hard to reach, pivot design ensures your cutting blades touch the outer walls of your pipe for smooth cuts. Lubricating the cutting wheel of the exhaust cutter before use will make the cutting operation smoother and prolong the service life of the item..
  • 【SERVICE GUARANTEE】High quality products and services have always been our purpose. If you encounter any problems in the proces....
Check Stock

Tail Throat,Yctze Universal Exhaust Tip Tail Throat Glossy Carbon Fiber Red Pipe Straight 3.1in Inlet 4in Single Outlet Exhaust Tip for Cars

  • FEATURES: 6.4in total length, 3.1in inlet size and 4in outlet size, applicable to 2.9‑3.1in exhaust pipe.Please confirm whether this product is suitable for the exhaust pipe diameter of your vehicle before purchasing. exhaust tip for cars.
  • STAINLESS STEEL MATERIAL:Adopt superior stainless steel,corrosion-resistant, durable, not easy to be damaged during use, reliable in use, and long in service life. carbon exhaust tip.
  • CARBON FIBER LOOK:This Tail Throat adopts high quality carbon fiber, dirt-resistant, anti-corrosion and durable. adding luxury and elegant sense to it, not easy to fade.red inside, stylish and distinctive, upgrade the car appearance. red exhaust tip.
  • EXCELLENT PEFORMANCE:Enhance the power, providing smoother exhaust, improve driving comfort and experience. exhaust tip.
  • INSTALLATION METHOD: Easy to install, no complicated tools are needed, and the old one can be replaced directly, saving you time and energy. carbon fiber exhaust tip.
Check Stock

3/4 Pipe Fitting Cap Home TZH 10 Pack Gray Malleable Iron Cast 3/4 Pipe Caps for Steam-punk Vintage Shelf Bracket DIY Plumbing Pipe Decor Furniture 10 3/4

  • Ultra-Durable Quality with 100% tested: When selecting furniture pipe fitting for your home, Home TZH pipe and fittings are the way to go. Our durable....
  • HIGH QUALITY MATERIAL - This pipe cap is mainly composed of iron, carbon and silicon alloy composition, with high strength, good toughness, plasticity....
  • EASY TO USE - These pipe fittings are threaded, just connect the threaded rods or pipes to the cap, you can easily to build any shape of frame and....
  • WIDE APPLICATION - The small solid and strong pipe cap could be used for any shelf installation, such as bookshelf, garden shelf, table and chair....
  • 100% MONEY-BACK GUARANTEE - We offer 90 days unconditional refund or replacement service if there are any quality issues. Contact us at any time and....
Check Stock

SZHOWORLD Titanium Mini Knife - EDC Pocket Knife, Small Compact Box Cutter with Special High Carbon Alloy Steel, Upgraded Version

  • New Titanium Mini Knife - EDC Pocket Knife, Small Compact Box Cutter with Special High Carbon Alloy Steel, Upgraded Version ! Daily necessities !.
  • Upgraded Version,the blade of this knife is made of special high carbon alloy steel (grade: 7Cr17MoV), which is firm, sharp and durable..
  • Practical without losing the sense of quality. A good knife should be sharp, durable, portable and ready to use..
  • Quality Material : Pure Titanium handle + Special high carbon alloy steel (grade: 7Cr17MoV) blade ..
  • Size: Total length 11.9cm, folding 7.9cm, width 1.2cm, blade length 4cm, weight 25g, including black box package, 63g in total.
Check Stock

Bravex Tubing Bender Pipe Tube Bender Kit Refrigeration Ratcheting Hand Tool 1/4 to 7/8 Inch with Tube Cutter/Deburring HVAC Tool Refrigeration System Maintenance

  • Suitable Tube Sizes: 1/4“, 5/16“, 3/8“, 1/2”, 5/8“, 3/4“, 7/8”, the maximum bending angle is 90 degrees, supports reverse bend. Bends pipes in both “forward” and “reverse” configurations..
  • The pipe bender is made of 40Cr steel & 45# steel with high precision machining. The aluminum alloy tube bender heads (replaceable) are firm and durable, preventing pipe deformation. The super long handle increases the leverage, making this tool both convenient and labor-saving..
  • Comes with pipe cutter, suitable for cutting heavy and hard materials, such as thin stainless steel (thickness.
  • Also includes a deburring tool made of solid plastic structure and high-speed steel bald head. It can quickly, cleanly and easily enlarge the inner diameter of different pipes (such as copper, aluminum, PVC and stainless steel pipes)..
  • If the pipe crack when bent,try heating and cooling to soften the pipe,and it will make perfect bends. Applications:automobile maintenance, refrigerator maintenance, Hvac work, hydraulic systems, etc..
Check Stock

68mm 2.5 Inch Mini Metal Adjustable Wrenches Hand Tool With 0-10mm Jaw Adjustable Spanner

  • The wrench is made of high-quality carbon steel material, with a polished surface, strong and durable, not easy to rust and deform.
  • ♻️The hand-held pipe wrench has a ring at the end, which can be conveniently hung on the wall, backpack, pants, etc..
  • ✅Applicable to industrial, machine repair, auto repair, electronic maintenance, bicycle maintenance, toys, crafts and home essential tools..
Check Stock

Prokomon Exhaust Pipe Stretcher Kit 1-5/8 to 4-1/4 Inches, Muffler Pipe Spreader Tool for Tail Pipe Tube

  • ◇ Heavy Duty Construction : All collets are made of aerospace-grade 6061 Aluminum while the expander utilizes Tempered 40CR Alloy Structural Steel, ensuring rugged rigidity over an extended service life. GB standard compliant..
  • ◇ The pipe stretcher kit is a convenient, inexpensive alternative to hydraulic pipe expanders..
  • ◇ Wide Expandinig Range : The exhaust pipe stretcher offers various collets for a broad expansion range from 1-5/8" to 4-1/4". Includes: Steel expander 1- 5/8" to 1-7/8" Collet ,Steel expander 2" to 2-1/2" Collet ,2-3/8" to 2-3/4" Collet ,2-3/4" to 3-1/8" Collet ,3-1/8" to 3-1/2" Collet ,3-1/2" to 3-7/8" Collet ,3-7/8" to 4-1/4" Collet.
  • ◇ Portable exhaust pipe expander tool, easy to use, suitable for most cars..
  • ◇ Used for expanding mild steel exhaust pipes to make perfect exhaust seals with smaller diameter piping..
Check Stock