WADEKING Aluminum Alloy Bike Pegs,Fit 3/8 inch Axles,Foot Pedals Backseats Stands,Durable, Non-Slip(2 Pieces) (Silver)
stylish engraving, enhanced rough surface. Better grip, increase the friction when the foot is pressed, and it is not easy to slip..
100mm * 28mm (3.93in * 1.1in), this applies to 3 / 8 inch shaft x 26T, first ensure the shaft size of your bicycle. This pin is not suitable for 14 mm..
Suitable for both front and back wheel axles of bicycle..
Installation method: The length of the shaft of the bicycle is too short. It is necessary to remove the screws on the shaft and then put the pegs on the shaft, which is much safer..
uxcell 12mm Inner Dia H13*D18 Rigid Flange Coupling Motor Guide Shaft Coupler Motor Connector 2PCS for DIY Parts
Inner Diameter: 12mm/0.47 inch, Total Height: 13mm/0.51 inch, Cylinder Outer Diameter: 18mm/0.71 inch, Cylinder Height: 10mm/0.39 inch, Base Diameter: 32mm/1.26 inch, Base Height: 3mm/0.12 inch, Mounting Hole Distance: 26mm/1.02 inch,2 x M4 Fastening Screws.
Type: Flange Shaft Coupling, suitable for model shaft connection, perfect accessories for RC Model motor, etc..
Material: Iron Alloy, hardened by heat treatment, and then electroplated. Durable and insulation, make your shaft more stable, easy to install and replace..
Function: A special coupler, which can fix one shaft to a plane and install other parts on the shaft easily. Double connection points fasten the coupler tightly..
Package: 2 x 12mm Flange Shaft Coupling, 4 x Fastening Screw( M4 Hex Wrench Not Included Here ).
uxcell 8mm Inner Dia H13*D16 Rigid Flange Coupling Motor Guide Shaft Coupler Motor Connector 2PCS for DIY Parts
Inner Diameter: 8mm/0.31 inch, Total Height: 13mm/0.51 inch, Cylinder Outer Diameter: 16mm/0.63 inch, Cylinder Height: 10mm/1.31 inch, Base Diameter: 32mm/1.26 inch, Base Height: 3mm/0.12 inch, Mounting Hole Distance: 24mm/0.94 inch,2 x M4 Fastening Screws.
Type: Flange Shaft Coupling, suitable for model shaft connection, perfect accessories for RC Model motor, etc..
Material: Aluminum Alloy, hardened by heat treatment, and then electroplated. Durable and insulation, make your shaft more stable, easy to install and replace..
Function: A special coupler, which can fix one shaft to a plane and install other parts on the shaft easily. Double connection points fasten the coupler tightly..
Package: 2 x 8mm Flange Shaft Coupling, 4 x Fastening Screw( M4 Hex Wrench Not Included Here ).
Please be sure to check your part or model number to ensure this is the correct shaft axle wheel kit for your unit. Also, please note this may replace multiple part numbers.
NQ Flagpole Hardware Repair Parts Kit-50 Feet Halyard Rope+3\ Gold Ball + 6\ Zinc Alloy Cleat+4 PCS Metal Swivel Snap Clips+Aluminum Alloy Flagpole Truck with Nylon Pulley for 1.6\-2\ Flag Poles Top
3’’ Flagpole Ball Topper ▶ Made of Aluminum Alloy with unique bright gold anodized finish decor,comes as a whole part with a diameter of 3’’.Long spindle shaft is perfectly fit through a solar flag light,jam nut can firmly locked the solar flag light..
2’’ Flagpole Truck with Nylon Pulley ▶ Made of Aluminum Alloy,fits flagpole with outside diameter from 1.6’’ to 2" .The nylon pulley will keep the flag rope for pole sliding smoothly through, perfect fit NQ flagpole halyard rope, you can easily raise and lower the flag.3pcs inset screws will make the truck on flagpole top more stable..
50FT-1/4’’ Flagpole Halyard Rope ▶ Made of 12 strands of 100% Nylon,designed for all-weather use.1/4 inch diameter can easily pass through the pulley,50FT long compatible with flagpoles up to 25FT..
6’’ Flag Pole Cleat with Mounting Screws ▶ Made of Zinc Alloy with unique bright silver finish decor,durable and long lasting use for fastening rope to flagpole.2pcs stainless steel mounting screws can fix the cheat on flagpole more easy.6“ length and distance between side is 0.7”..
2.5’’ Flag Swivel Hooks ▶ Made of Zinc Alloy with unique bright gold finish decor,.0.4’’ opening size is suitable for most standard grommet flags,0.5’....
2016-2021 POLARIS RZR 1000 XP & S - NEW SECONDARY DRIVEN CLUTCH Complete !
Polari Clutch Replacement for:2020 POL GEN 1000 DLX ABS EPS EU TR ZUG, 2021 GENERAL 1000 DELUXE EPS EU, 2018 POLARIS GENERAL 1000 PS MD, 2019 POLARIS GENERAL 1000 EPS EU TR ZUG MD, 2014-2018 RZR XP 1000, 2014-2015 RZR XP 1000 INTL, 2014 RZR XP 4 1000/PS, 2017 RZR XP 4 1000 MD, 2015-2018 RZR XP 4 1000, 2016 RZR XP 1000 EU/MD, 2017-2018 RZR XP 1000 MD, 2017-2018 RZR XP 1000 TRACTOR/EU/ZUG.
Polari Reference Part Number: 1323068 1323241.
Allows engine cranking and permits the engine to run without delivering power to the transmission. While disengaging, it permits the driver to shift the transmission into various gear according to operating condition..
Heat-treated center shaft for enhanced reliability, sheaves machined at optimized angles for top speed and strong takeoffs.
Made from a Magnesium-aluminum alloy and high-pressure casting for increased durability, balanced sheaves for added longevity.
PLAYEAGLE Golf Putter, Classic Stainless Steel Mini Golf Putters Two-Way Club Putter Junior and Adults for Men Right/Left Handed-Indoor/Outdoor- 34\ Length (Blue)
[REMOVABLE DESIGN]: This putter is composed of 4 parts, a ball head, a two-section shaft, and a rubber grip.Reduce the volume,easy to ship and carry..
[TWO-WAY PUTTER]: This golf putter suitable for any golfer, whether you are right-handed, left-handed, advanced or beginner, this two-way putter performs well..
[MATERIAL]: This golf putter is made of three materials: zinc alloy head, aluminum alloy shaft, and rubber grip. Made of high-quality materials, strong and durable..
[SIZE]: 34-inch shaft, suitable for adults or teenagers, can be used in indoor or outdoor courts, for training or learning golf, suitable for beginners..
[Color] Blue, representing resourcefulness and agility.It is light,safe and interesting for kids to practise golf..
