uxcell M2.5 x 0.45 Metric Round Die, Machine Thread Left Hand Threading Die, Alloy Steel
accuracy class: 6g. Made of alloy tool steel, hardness, high torque, good toughness and wear-resistance..
Applications: Can process, correct or clean the external threads. Suitable for general purpose threading in stainless steel, aluminum alloy, cast iron, copper, iron, aluminum, plastic, etc.. Great for maintenance and repair work on pipes, boards and machinery..
Features: Conical locking hole, strong locking and not loose. Perfect for re-threading existing threads in hard materials like metal and making new threads in soft material such as plastic. The surface is lubricated with grease to prevent rust, the thread is clear and easy to repair..
Easy to Use: The positioning groove of the die should be aligned with the fastening screw in the middle of the die wrench, and the screw should be inserted into the slot of the die and tightened. The end of the bar should be chamfered 1*45 degree, and the chamfer is too large to cut in..
Tips: It needs to be reversed every 1/4~1/2 turn to facilitate the chip discharge from the chip hole. Suitable lubricating oil should be added to the cutting edge of the die when tapping the thread. The bar diameter should be smaller ....
uxcell 1/4-28 UNF Round Die, Machine Thread Right Hand Threading Die, Alloy Tool Steel, 2pcs
fine grinding. Made of alloy steel, hardness, high torque, good toughness and wear-resistance for long service life..
Applications: Can process, correct or clean the external threads. Suitable for general purpose threading in stainless steel, aluminum alloy, cast iron, copper, iron, aluminum, plastic, etc.. Great for maintenance and repair work on pipes, boards and machinery..
Features: Conical locking hole, strong locking and not loose. Perfect for re-threading existing threads in hard materials like metal and making new threads in soft material such as plastic. The surface is lubricated with grease to prevent rust, the thread is clear and easy to repair..
Easy to Use: The positioning groove of the die should be aligned with the fastening screw in the middle of the die wrench, and the screw should be inserted into the slot of the die and tightened. The end of the bar should be chamfered 1*45 degree, and the chamfer is too large to cut in..
Tips: It needs to be reversed every 1/4~1/2 turn to facilitate the chip discharge from the chip hole. Suitable lubricating oil should be added to the cutting edge of the die when tapping the thread. The bar diameter shoul....
Steel Bench Block and Metal Stamping Hammer Kit, No-Rebound Metal Bench Block, Jewelry Stamping Hammer, Jewelry Metal Stamping Tools for Jewelry Making & Metal Stamping
【Professional Metal Stamping Kit】You will get a heavy duty steel block for jewelry making and a metal stamping hammer for metal stamping blanks or jewelry tags, they are an essential tool kit in your metal working/jewelry making toolbox.
【No-Rebound Steel Block】The steel block for jewelry making is No-Rebound design. The bottome of the block is wrapped with rubber to absorb shock and vibration caused by knocking.
【Premium Quality】The steel bench block for jewelry & stamping is made of industrial grade hardened carbon steel, it is mirror polished and chrome plated, ideal for metalworking and custom jewelry stamping.
【Jewelry Hammer】Double-headed mini steel hammer with flat and domed ends to achieve an accurate strikes, the ergonomic rubber-coated handle with a grooved grip which is easy to grip and use.
【Widely Used】This professional metal stamping kit is perfect for beginners and skilled craftsmen alike for flattening, forming, chasing, laying out, and stamping metalwork, also for metal stamping blanks, jewelry labels and more.
Metal Letter Punch Set 1/4 (6mm),36PC Steel Number and Letter Stamp Set,Stamping Tool Set kit for Imprinting Metal, Plastic, Wood, Leather.
36Pcs Steel Metal Stamp Set Number and Letter Punch Tools ,Stamp kit for creating permanent hand-stamped imprints.
Stamping set Includes 26Pcs.Uppercase Letter(A-Z) , 1Pc. Symbols(&) ,9Pcs. Number(0-9) ,Reverse “6” can be used as “9”.- 1/4 inch (6mm) character height..
Made from durable alloy steel with a sand-blasted finish for strength and clear imprints, even over time；Metal alphabet punches are on a 1/4" (6mm) square shank for use as impact hammer bits.
The stamping set Fit for Perfect for personalizing jewelry and other items,Make precise and refined imprints on leather, wood, copper, brass, aluminum and mild steel.
Compact size box, won't take up a lot of space.
Buy with 100% confidence and satisfaction: 30 day money back guarantee with Amazon FBA..
YiJiLi Diestock Holder Metal Round Die Stock Holder Thread Tap Wrench Handle Bar Tools Woodworking DIY(M18-M22), 45mm
【Dimension】-Diameter: 45mm/1.77 inches.
【Material】- Steel & Alloy Steel, with superior toughness, great wear resistant, rust-proof, durable for lasting a long service life.
Used to make new threads when the threads are seriously damaged.
【Easy to Use】- This die handle is easy to use for occasional hole project. It fits the die perfectly and easy to use.
【Features】- Round die holder is featured with 5 adjustable screws to fix the dies.
The die stock can securely hold round dies and is easy to operate.
【Wide Usage】- This tap and die comes with a removable handle for work in tight spaces. Suitable for cleaning mild steel or aluminum, house decoration, construction, car repairing, factory work.
OWDEN Professional 36Pcs. Steel Metal Stamps Set,(3/16”) 5mm,Steel Number and Letter Punch Set,Alloy Steel Made HRC 58-62 for Jewelry Craft Stamping.
Owden Professional 36Pcs. Steel metal number and letter punch set (3/16”) 5mm ,Uppercase, All Stamps are made of high quality alloy steel for strength and hardness , Hardness: Hrc 58-62..
36Pcs. Stamping set Includes 26Pcs.Uppercase Letter(A-Z) , 1Pc. Symbols(&) ,9Pcs. Number(0-9) ,Reverse “6” can be used as “9”..
The stamping set better for permanently marking steel,Brass,Plastic,Leather,Paper,Aluminum,Sliver and Stainless steel Etc. Use with a hammer to permanently engrave various commemorative statements or figures (Name,Add.Date Etc.) on material including jewelry craft..
All stamps are made to a high standard, With accurate dimensions and clear strokes. Sanding finished on the surface of the products.The whole product is packed into a sturdy and nice plastic case for easy storage..
We have prepared 4 sizes for customers to choose (This is 3/16” 5mm), Please refer to the pictures introduction,In order to choose the adjacent size for your working. Trust Owden..
OWDEN Professional 36Pcs. Steel Metal Stamping Tool Set,(1/8”) 3mm,Steel Number and Letter Punch Set,Alloy Steel Made HRC 58-62 for Jewelry Craft Stamping.
Owden Professional 36Pcs. Steel metal number and letter punch set (1/8”) 3mm ,Uppercase, All Stamps are made of high quality alloy steel for strength and hardness , Hardness: Hrc 58-62..
36Pcs. Stamping set Includes 26Pcs.Uppercase Letter(A-Z) , 1Pc. Symbols(&) ,9Pcs. Number(0-9) ,Reverse “6” can be used as “9”..
The stamping set better for permanently marking steel,Brass,Plastic,Leather,Paper,Aluminum,Sliver and Stainless steel Etc. Use with a hammer to permanently engrave various commemorative statements or figures (Name,Add.Date Etc.) on material including jewelry craft..
All stamps are made to a high standard, With accurate dimensions and clear strokes. Sanding finished on the surface of the products.The whole product is packed into a sturdy and nice plastic case for easy storage..
We have prepared 4 sizes for customers to choose (This is 1/8”3mm), Please refer to the pictures introduction,In order to choose the adjacent size for your working. Trust Owden..
ImpressArt Brass Head Ergo-Angle Metal Stamping Hammer (1 Pound), Great for Stamping Jewelry, Leather & Wood
The Ergo-Angle Metal Stamping Hammer was designed specifically for metal stamping. With a smaller, scaled down grip, and multiple holding options, it provides easy handling and precision striking when hand stamping metal jewelry. The 1 pound (1lb) brass hammer head and ergonomic grip aids in striking metal stamps with the right amount of force, every single time. This hammer is great for the beginner and intermediate stamper..
The 1 pound brass head helps to extend the life of your metal stamps by reducing wear and tear throughout each hand stamping project. The sturdy and grooved grip allows for maximum force and precision strikes. The head is replaceable, because over time, brass hammers may flake when striking, this is by design..
Ergonomic grip and 1lb brass head ensures that every strike is accurate, resulting in a professional jewelry or leather DIY project. Brass heads are better than steel heads for metal stamping because brass evenly disperses the energy of the hit into the stamping blank. This prevents double impressions and also provides longevity to your stamps and steel punches..
Back side of the head of this brass stamping hammer can be used for flattening metal stamping blanks into form..
NOTE: being that the brass head is softer than stee....
