Boat dry weight 250Lbs, carry 10 passengers, max loading 2159Lbs.
Pontoon diameter 19.7 inches, 5 pontoon chambers and 1 keel chamber, Chambers with Hypalon type 4 layers overlapped seam, max pressure 3.6PSI (25kPa).
Short shaft 16”/ 82° & reinforced transom, Max 35HP motor, suggested 20-30HP.
Manufacturing Standard: Commercial grade boat fabric for main construction.
Four layers overlapped chamber seam structure (Feature Code: FOS).
Transom Stabilizer & Reinforcement Design (TSR).
Seamax special feature also including: Dual Heavy duty life lines.
Heavy duty boat bumper around the boat and bottom.
Heavy duty D-Ring & Towing Ring patches..
Features: Non-skid sectional aluminum floor system with side joiners, Fuel tank and battery box tie down fitting on the floor, Dual motor pads and heavy duty pontoon towing rings.
Transom to pontoon adapter fully reinforced, marine sealant is applied which resists le....
Large Load Capacity: The boat launching wheels are designed to enable one people launching of an inflatable boat. The weight capacity of the 12"/30.5....
Durable Aluminum Alloy: Our inflatable boat launch wheels arms are made of durable aluminum alloy with CNC processing, which will hold up even under....
Quick Release Pins: The transom launching wheels are equipped with 2 pairs of sturdy quick release pins. The accessories play an essential role in....
Simple Installation: The dinghy transom launching wheels set is easy to operate, saving much time. You need to follow the steps in the picture, and it....
Extensive Application: The inflatable boat transom launching wheel is widely applicable to most boats with a transom, such as Jon boats, dinghy,....
Handi-Treads Non Slip Aluminum Pad, Powder Coated Gray, 3.75\ x 12\ with Color Matching Wood Screws, Each
Patented raised button surface provides traction from any direction.
The aluminum non slip pad is a permanent alternative solution to non slip grit tape and grip paint.
Pads will never wear out and require little maintenance.
Each pad has 6 (six) pre-drilled holes for quick installation using the color matching stainless steel wood screws that are included.
Pads measure 3.75" x 12" and can be installed on any wood surface (walkway, staircase, ramps, swimming pool entrance, boat dock, boat ramp, boardwalk, etc) requiring greater traction.
Handi-Treads Non Slip Aluminum Pad, Powder Coated Yellow, 3.75\ x 12\ with Color Matching Wood Screws, Each
Patented raised button surface provides traction from any direction.
The aluminum non slip pad is a permanent alternative solution to non slip grit tape and grip paint.
Pads will never wear out and require little maintenance.
Each pad has 6 (six) pre-drilled holes for quick installation using the color matching stainless steel wood screws that are included.
Pads measure 3.75" x 12" and can be installed on any wood surface (walkway, staircase, ramps, swimming pool entrance, boat dock, boat ramp, boardwalk, etc) requiring greater traction.
TotalBoat Krypton Copper Free Antifouling – Marine Ablative Boat Bottom Paint | For Fiberglass, Wood, Aluminum & Steel Boats | Ideal for Outdrives & Trim Tabs (Red, Gallon)
HIGH-PERFORMANCE MARINE ANTIFOULING BOAT BOTTOM PAINT provides superior single-season protection against barnacles, weeds, algae & slime in fresh water, salt water, and brackish water.
COPPER FREE FORMULA won't cause galvanic corrosion on aluminum boats, outdrives and trim tabs.
copper-free paint also means colors are much brighter than bottom paint that contains copper biocide.
FOR USE ON FIBERGLASS, WOOD, STEEL, IRON & ALUMINUM BOATS below the waterline only.
haul and relaunch without losing the effectiveness of the biocide.
EASY TO APPLY: For brushing, use a high-quality, natural bristle brush.
for rolling, use a 3/16” nap or foam solvent-safe roller cover.
if needed, thin with TotalBoat Special Brushing Thinner 100 (brushing/rolling) or TotalBoat Spray Thinner 101 (spraying).
AVAILABLE IN FIVE BRIGHT, VIBRANT COLORS: Blue (Quart & Gallon), Black (Quart & Gallon), White (Quart & Gallon), Green (Gallon only), and Red (Gallon only).
after applying, there’s no maximum dry time before launch.
TotalBoat - 413458 Krypton Copper Free Antifouling – Marine Ablative Boat Bottom Paint | For Fiberglass Wood Aluminum & Steel Boats | Ideal for Outdrives & Trim Tabs White Gallon
HIGH-PERFORMANCE MARINE ANTIFOULING BOAT BOTTOM PAINT provides superior single-season protection against barnacles, weeds, algae & slime in fresh....
COPPER FREE FORMULA won't cause galvanic corrosion on aluminum boats, outdrives and trim tabs.
copper-free paint also means colors are much brighter....
FOR USE ON FIBERGLASS, WOOD, STEEL, IRON & ALUMINUM BOATS below the waterline only.
haul and relaunch without losing the effectiveness of the biocide.
EASY TO APPLY: For brushing, use a high-quality, natural bristle brush.
for rolling, use a 3/16” nap or foam solvent-safe roller cover.
AVAILABLE IN FIVE BRIGHT, VIBRANT COLORS: Blue (Quart & Gallon), Black (Quart & Gallon), White (Quart & Gallon), Green (Gallon only), and Red (Gallon....
Handi-Treads Non Slip Aluminum Strip, Powder Coated Brown, 1.875\ x 30\ with Color Matching Wood Screws
The aluminum non slip tread strip is a permanent alternative solution to non slip grit tape and grip paint because they will never wear out and require little maintenance.
Strips measure 1.875" x 30" and can be installed on any wood surface (walkway, staircase, ramps, swimming pool entrance, boat dock, boat ramp, boardwalk, etc) requiring greater traction.
Each strip has 4 (four) pre-punched holes for quick installation using the color matching stainless steel wood screws that are included.
Please contact us directly for custom sizes and/or colors.
Patented raised button surface provides traction from any direction.
MARINE BOTTOM PAINT FOR MULTI-SEASON PROTECTION IN HIGH FOULING CONDITIONS: High copper content (38% cuprous oxide) for maximum antifouling protection against barnacles & slime for sailboats & power boats in fresh, salt and brackish waters.
SMOOTH, ABRASION-RESISTANT FINISH FOR MAXIMUM PERFORMANCE: Offers maximum speed and fuel efficiency.
advanced copolymer ablative formula offers continuous antifouling protection whether the boat is at anchor or underway.
HAUL AND RELAUNCH WITHOUT REPAINTING: Hauled your boat for longer than 2 weeks? Simply scuff lightly to reactivate this paint's antifouling properties.
ablative formula reduces paint buildup, which means no heavy sanding next time you apply bottom paint.
EASY TO APPLY, DRIES FAST: Apply by brushing, rolling or spraying on fiberglass, wood, steel and previously painted surfaces in good conditions. THINNING: Brush/roller application - TotalBoat Special Brushing Thinner 100.
AVAILABLE IN BLACK, BLUE, GREEN & RED COLORS in Gallon size.
Black and Blue are also available in Quarts.
NOTE: There is no maximum dry time before launching.