Best Aluminum Cutting End Mill

5PCS R0.5-3mm Ball Nose Carbide End Mill Set CNC Cutter Router Bits 2 Flute Spiral Milling Tool End Mill Set Includes 5 Radius Sizes Of 0.5mm 1mm 1.5mm 2mm 3mm

  • Applicable Materials: ball mill bit usually used for steel（Carbon steel/Alloy steel/Hardened steel/Cast lron, etc.）.
  • Ball End Mill Specification -- Cutting Diameter: 1 - 6MM（1mm 2mm 3mm 4mm 6mm），Shank Diameter:4 - 6MM（4mm 4mm 4mm 4mm 6mm），Cutting Length:2 - 12MM（2mm 4mm 6mm 8mm 12mm），Overall Length:50MM.
  • Wide Compatibility: ball nose end mill set are compatible with most desktop CNC machines, as well as other industrial CNC machines. Just make sure you select the correct-sized collet for your device..
  • High Quality:made from solid tungsten carbide (TC)，have a Titanium Nitride (TiN) surface to improve heat resistance and reduce wear..
  • Used it strictly for steel, it worked great for that, eats metal fast ，beautiful surface finish!Watch your stick out and travel speeds..
Check Stock

LittleMachineShop.com 4 Flute Ball End Mill Set, High Speed Steel, 6 Piece (2903)

Check Stock

Slow Running: Running for fun: without going too far, too fast, too soon

  • This rail mill guide system is used with chain saw and chainsaws frame for log wood chip cutting.
  • The rail system in combination with the saw mill allow smooth sliding for the mill creates a straight and level first cut along a log.
  • Constructed from aircraft grade aluminum, these new brackets are easier to adjust and durable for long lasting using.
  • All necessary assembly and installation hardware are including for easy installation.
  • Perfect for homeowners, woodworkers, carpenters, you can mill your own lumber at home or in the woods.
Check Stock

EANOSIC Spiral Router Bits Up Down Compression Bit 1/2 inch Cutting Diameter with Nano Blue Coated 1/2 inch Shank Solid Carbide CNC End Mill for Wood Carving Engraver Milling Cutters Extra Long 4”

  • UP & DOWN cut spiral router bit with 1/2 inch shank and 1/2 inch cutting diameter, 1-1/2 inch cutting length, 4 inch for total length.
  • SOLID CARBIDE AND NANO BLUE COATED: The up and down cut spiral router bit is made of solid carbide. And Nano Blue Coating with high hardness and heat....
  • Spiral bits used for side milling, end milling, finish machining, etc. End Mill Bits can smoothly upcut and downcut groove and slots, mortises, cycles....
  • The CNC End Mill Router Bits apply to various wood: such as Plywood, OAK, MDF, and any hardwood working and Long service life for sharp. And also for....
  • The compression router bit suit for CNC router and any plunge routers with 1/2" collet..
Check Stock

Kodiak Cutting Tools KCT137718 USA Made Premium Carbide End Mill, Extra Long, 4 Flute, 5/16\ Shank, 4\ Overall Length, 1-5/8\ Length of Cut, 5/16\ Diameter

  • Premium Sub-Micrograin Carbide End Mill Made In the USA.
  • 1-5/8" Flute Length (Length of Cut), 30 Degree Helix.
  • 4" Overall Length Center Cutting Carbide Endmill.
Check Stock

Chamfer End Mill 3 Flute Chamfering Router Bit 90° Tungsten Steel CNC Polishing Carving Tool for Small Cutting Amount(D3*90°*50L)

  • 3 FLUTES: The chamfering knife is designed with 3 flutes, which can complete the operation of conical surface at one time, and is suitable for small cutting amount..
  • ONE-PIECE DESIGN: The unique one-piece design makes the debris generated during the cutting process easier to fall without clogging the tool..
  • EASY TO USE: The milling cutter bit dopts professional chamfer design, which can polish and engrave the workpiece without unloading..
  • STANDARD SIZE: The end mill chamfer bit has standard size and can be used as an aluminum‑copper milling cutter tool and an engraving milling cutter head..
  • APPLICATION: The chamfering tool is compact design, easy to carry and store, mainly used for 90° chamfering or taper hole processing on the workpiece..
Check Stock

SPEED TIGER ISE Carbide Square End Mill - Micro Grain Carbide End Mill for Alloy Steels/Hardened Steels - 2 Flute - ISE1/4\2T - Made in Taiwan (5 Pieces, 1/4\)

  • GENERAL APPLICATION CUTTER - Speed Tiger 600 Nano carbide tools excel at working carbon steels (~HB225), alloy steels (HB225~325), pre-hardened steels (up to HRC45), hardened Steels (HRC40~45), cast iron.
  • HIGH PERFORMANCE FOR HARD MATERIALS - Cutter is made of Micro Grain Carbide that is very tough, resists wear and offers high cutting performance.
  • AlTiBN COATING - Titanium aluminum boron nitride (AlTiBN) coating lubricates the end mill for stability at high temperature and superior wear resistance at high cutting speeds, offering better heat resistance than TiAlN, TiN or TiCN coatings.
  • HIGH-QUALITY - Flutes ground by a world-class ISO-9001 Factory.
  • Great performance at a competitive price..
  • DEDICATED SUPPORT - Contact seller via Amazon anytime for cutting condition data to get the best performance from your Speed Tiger cutters.
Check Stock

JIANXING 4mm 5mm 6mm Carbide Square End Mill Set,4 Flute Cutting Tools,HRC 55 Deg,Tialn Coating，Straight Shank Square Nose End Mills Cutter,CNC Router Bits,Widely Used in Alloy Steels/Hardened Steels(1 Set)

  • 【Cnc 4-Flute End Mill 】Adopt Modern Grinding Machine Equipment For High-Precision Grinding. Resists Wear And Offers High Cutting Performance.
  • 【Material】: Carbide With Tialn Coating For HRC 55 Deg, The Tialn Coating Has Stable Performance And Is Not Easy To Wear Under High Temperature Environment. It Has Higher Hardness And Wear Resistance And Excellent Cutting Performance.
  • 【The 35 degree helix angle design】 Greatly Improves The Production Efficiency, Sharp And Durable, Convenient For Chip Removal.
  • 【Applicable materials】 Include Ordinary Steel, Carbon Steel, Alloy Steel, Hardened Steel, Cast Iron, Etc. The End Milling Cutter Bit Is Suitable For Plane / Side Milling, U-Groove Milling And Other Additive Methods..
  • 【Package Included】: 1set (4mm+5mm+6mm) Carbide End Mill.
Check Stock

SpeTool CNC Router Bits Carving 8 Pcs Set for Wood Detail Profile V Groove Engraving Solid Carbide 1/4 Inch Shank

  • The Carving bits kits of Tapered Ball Nose, Spiral, Cone End Mill Cutter.
  • For CNC,Engraving machine.Carving Wood, plywood, MDF, plastics, acrylic, stainless steel, titanium alloy etc.
  • Long service life, Decreasing the times of changing cutters,Saving production time.
  • Include 3*carbide end mills ( 2 pc v-groove end mill, 1pcs tapered end mill ), 4*Spiral End Mill (3 pc up cut, 1 pc down cut), 1*ball end mill.
  • The Carbide End Mill Suit for CNC Router and Makita, Bosch, and Any Brand Plunge Router with 1/4" Collet.
Check Stock

T Slot Cutter End Mill, Tungsten Steel 4 Flutes Milling Cutter End Mill for Cutting Aluminum Alloy Wood, D6xH2xL50xφ6 T Type Slot Cutter

  • Good Durability Anti-stick Material: This T Slot Cutter End Mill is made of high quality tungsten steel material, wear resistant and not easy to stick cutter.
  • Offers Glossy and Precise Cutting: Chamfering at the bottom, high smoothness and high overall precision.
  • High Efficiency Performance: Fast processing speed, high finish, strong continuous processing is not easy to break.
  • Three-edge Design Provides Faster Working: Precise edges at the front corners, three-edge geometry for faster cutting.
  • HRC55: Suitable for objects with hardness lower than HRC55.
Check Stock