Best Aluminum Machining Oil

YOYO TOOLS, Carbide Square Nose End Mill Set- Metric Carbide End Mill CNC Milling Cutter Tungsten 4 Fultes by YOYOTOOLS (D8+D10 End Mill)

  • 8mm and 10mm End Mill Set, Material : Tungsten Carbide.
  • End Mill Cutting Diameter : 8mm , 10mm, HRC55 degrees.
  • Suit for: with high bending resistance and abrasion resistance, exclusive to HIGH HARDNESS, HIGH SPEED CUTTING applications..
  • End mill bits are suitable for side milling, end milling, finish machining, etc. Apply to carbon steel, soft alloy steel, die steel, tool steel, cast iron, titanium, aluminum, etc..
  • The bottom of end mill bits is u-shaped groove design, large front angle effectively reduces cutting resistance, sharp and durable, convenient for chip removal, further improve machining efficiency..
Check Stock

SpeTool 3 Flute Carbide End Mill for Aluminum Non-Ferrous Cutting Tool Upcut Bit for CNC Machine, 1/2 Inch Shank, Extra Long 4 Inch

  • Solid Carbide Spiral Router Bit with 1/2 inch Shank and 1/2 inch Cutting Diameter, 2 inch Cutting Length, 4 inch for Total Length.
  • The Route Bits With Flat Top, 3-Flute, Upcut For Easy Chip Removal And Perfect Surface Finish. Clockwise Motion for Machining..
  • For Aluminum 6061,7075 etc. Non-ferrous Metal, Plywood, OAK, MDF, and Any Hardwood Working and Long service life for sharp.
  • The Carbide EndMill Suit for CNC Router and Makita, Bosch, and Any Brand Plunge Router with 1/2" Collet.
  • End Mill Bits are Suitable for Side Milling, End Milling, Finish Machining, etc..
Check Stock

AUTOTOOLHOME 1/4 inch HSS 4 Flutes End Mills Milling Cutter End Drill Bit Straight Shank Pack of 2

  • HIGH PROCESSING EFFICIENCY: the edge of end mill bits is HARD and SHARP with TIAIN coating, process the heat treatment materials under 32°with high speed, reduce changing times and improve the production efficiency..
  • APPLICATION: end mill bits are suitable for side milling, end milling, finish machining, etc. Apply to carbon steel, alloy steel, die steel, tool steel, cast iron, titanium, aluminum, etc..
  • CUTTING EDGE DESIGN: the bottom of end mill bits is u-shaped groove design, large front angle effectively reduces cutting resistance, sharp and durable, convenient for chip removal, further improve machining efficiency..
  • STRONG and DURABLE:The end mill bits are made from Ultra-fine tungsten steel bar, with high bending resistance and abrasion resistance, exclusive to HIGH HARDNESS, HIGH SPEED CUTTING applications..
Check Stock

VERNUOS 3 Pieces 1/8\ (3mm) X 3.93\(100mm) Square Aluminum Flat BAR 12\ Long .118\6061 General Purpose Plate,T6511 Solid New Mill

  • Easy to machine or weld aluminum rod for milling or lathe work in a variety of applications and industries.
  • All aluminum bars are sourced from 100% domestic products and mill certifications are available upon request.
  • 6061 commercial grade aluminum stock is known for its exceptional toughness and high strength-to-weight ratios.
  • General purpose aluminum round bar for prototyping or production runs including machining and finish coatings such as anodizing.
  • Aluminum bar stock is an exceptional building and project material that will not rust and will last for years to come.
Check Stock

Brass Oil Distributor 5\\/6 Way Adjustable Lube Oil Piston Distributor Value Manifold Block for Centralized Lubrication System(1 in 5 out)

  • ☛【Oil Volume Outlet Can Be Adjusted】The oil volume of each oil outlet can be adjusted to meet the needs of various working scenarios.
  • ☛【Easy To Adjust And Distribute 】The oil separator has a simple and compact structure, and is easy to adjust and distribute evenly.
  • ☛【Wear Resistance And Durable】Using high‑quality brass material, the oil distributor possesses good wear resistance and is durable.
  • ☛【Good Product Performance】Good production technology and air tightness ensure good product performance.
  • ☛【Applicable Widely】 The product is applicable to CNC machining center machinery, production lines and machine tools, forging machinery, die-casting machinery, woodworking machinery and other mechanical equipment lubrication systems.
Check Stock

Milling Face, High Temperature Resistance High Speed Good Impact Resistance Facing Cutter, New Coating Technology for Precision Machining Rough Machining

  • Machining Range: precision machining, rough machining, plane processing and step processing..
  • High speed: rotary and milling feed speeds are 3 times faster than normal milling cutters..
  • Made of cemented carbide, which has high hardness with good impact resistance..
  • New coating technology is adopted on the surface, which has good oxidation resistance and high temperature resistance, it can be used for a long time..
Check Stock

OREI eARC 4K 60Hz Audio Extractor Converter 18G HDMI 2.0 ARC Support - HDCP 2.2 - Dolby Digital/DTS Passthrough CEC, HDR, Dolby Vision HDR10 Support (HDA-927)

  • Cutting Diameter : 1/8" 3/16" 1/4" 5/16" 3/8" 1/2" 5/32" 1/16".
  • Suit for: Hardness of metal for above 30 degrees,with high bending resistance and abrasion resistance, exclusive to HIGH HARDNESS, HIGH SPEED CUTTING applications..
  • End mill bits are suitable for side milling, end milling, finish machining, etc. Apply to carbon steel, soft alloy steel, die steel, tool steel, cast iron, titanium, aluminum, etc..
  • The bottom of end mill bits is u-shaped groove design, large front angle effectively reduces cutting resistance, sharp and durable, convenient for chip removal, further improve machining efficiency..
Check Stock

SpeTool Tapered Ball Nose End Mill 1/4\ X 3\ with 0.5mm Tip Diameter(0.25mm Radius) Ball Nose 5.26Deg Router Bit for CNC Machine Engraving Carving Bits H-Si Coated

  • 【1】Brand: XJL 【2】Name: Nano Ball Nose End Mill 65° 【3】Material: tungsten steel.
  • Bar: 0.4um granular tungsten steel 【4】Coating layer: NANO.
  • For high-hard materials and high-speed machining fields, the optimized NANO silicon nitride coating makes the tool have high-temperature stability.
  • 【5】Number Of Flutes:2F,Spiral Angle: 35°Double edge belt + Negative rake Angle design 【6】Applicable cutting materials: Alloy steel, carbon steel, quench and tempering steel die steel HRC 55-65° of high hardness materials. 【7】Suitable for machine: CNC machining center, engraving machine, high-speed machine,dry cutting,etc.
  • 【8】Processing methods: finish machining, semi-finish machining, curved surface machining, arc machining, irregular machining.
  • 【9】Main features:milling cutter for high-hardness and high-speed cutting applications. The edge is coated with NANO-BLUE coating, which can directly perform high-speed rough machining and fine machining on heat-treated materials below 65°, reduce the number of tool changes, advance the productivity of machine tools, save the groove design and grinding method of manufacturing time, and have the advantages of high chip conduction, AG, long service life and high surface finish after machining..
Check Stock

BACHIN Mini Lathe Beads Polisher Machine Diy Machining for Table Woodworking Wood DIY Tool Lathe Standard Set

  • Designed for the home DIY enthusiasts, small and portable, strong power, not suitable for mass production or commercial use..
  • Power: 100W Voltage: 24V DC Material: aluminum alloy and Acrylic Speed: 5000-8000 r / min, 7 grade speed Size: 310* 60 * 70mm 3x Hex shanks(0.059inch,0.079inch,0.098inch).
  • Maximum turning diameter: 70mm. Maximum clamping length: 180mm. Chuck clamping range: 0.6-6mm.
  • High-precision, stability, low noise, aluminum alloy materials, CNC machining..
  • Thick aluminum base, acrylic dust cover motor. Transparent plexiglass shield, super convection cooling holes..
Check Stock

Flap Disc grinding wheel sanding discs 25 Pack 4.0

  • 25 pieces T27 aluminum wheel with high lead oxide alumina, 4.0 inch x 5 / 8 inch, 25 pieces of 60 grain size. It can be used for edge machining and profile application, providing a grinding angle of 10-15 degrees, can be used for edge machining or profiling application, and can effectively absorb vibration without generating stains, thus bringing more stable and effective..
  • High-Performance Bevel T27 Wheel high-density and high-quality zirconia is produced to make it compatible for grinding, with the maximum speed of 13, 000 RPM..
  • Safety made of alumina abrasives and zirconia alumina materials, it has longer service life than the standard alumina abrasives. It has a good heat dissipation, low noise, higher toughness and abrasive resistance, and it is specially designed for stronger and more economical grinding wheels..
  • Application Rust protection, Paint, nonferrous metals, chamfer, mixing by welding, stainless steel and nonferrous metals, cleaning and finishing, polishing, wood and plastic, the perfect products can meet your needs..
  • Thanks for buying]if you have any questions about our products, please send us email. We are 100 percent to help you with your purchase. If you have any questions, please feel free to contact us..
Check Stock