Fielect 8mm Carbon Fiber Rod for RC Airplane Matte Pole Length 200mm 7.8 inch 2pcs
【Features】- The carbon fiber rod has good heat resistance, corrosion, rubbing performance, high strength, stable and surface smoothness..
【Advantages】- Carbon fiber bar is vert lightweight, lighter than aluminum, yet stronger than steel..
【Application】- Carbon Fiber Rod are suitable for aviation model aircraft, model cars, multi-rotor support rods, model boats, racing cars, robots, DIY aircraft production, 3D printers, arrow rods, kites, windmills, sails, DIY subject support poles, mosquito nets, Tents, bows, hatches, PCB equipment shafts, luggage, hand rods..
ACASIS USB C 3.2 SSD Enclosure for Apple Flash SSDs 12+16 PIN MacBook Pro,MacBook Air, Mac Pro, iMac from 2013 to 2017 Portable Storage Enclosure Compatible with M.2 Nvme SSD with Adapter
[More Compatibility] This USB C 3.2 SSD enclosure support for apple Mac SSD with 12+16PIN which was original factory-installed. NOT SUPPORT Toshiba 12+16PIN SSD and all SATA SSD. NOT compatible with Third-party SSDs, including OWC SSDs. Support M.2 Nvme SSD after installing the enclosed interface adapter..
[Faster Data Transmission] 10Gbps transmission speed with USB 3.2 Gen2 interface. Save and transfer data in a seconds. It can also reach 20Gbps transmission speed with USB 3.2 Gen2x2 if the computer supports..
[Friendly Design] Aluminum alloy case for quicker heat dissipation. ACASIS USB C 3.2 SSD enclosure is sturdy and portable..
[System Requirements] ACASIS USB C 3.2 SSD enclosure supports Windows7/8/10/11,Mac OS 10.0,Linux 2.6 or later.Supports for 2013-2017 MacBook Air, 2013-2015 MacBook Pro Retina, 2013-2014 iMac, 2013 Mac Pro.
[Easy Installation] Just take out the PCB board from the enclosure,then fully insert SSD to card slot of the PCB board, put PCB back into the enclosure,tighten the screws.Plug and play, support hot plug.On Windows OS, hard disk will not available on "This PC"/ "My computer.
UniCusMech 4 Pieces Set of Silencer Pad Silencer Foam Sound Dampeners Sheet, Compatible with 61 Keys Layout Mechanical Keyboard(Switch Pad, Silencer Pad, Bottom Cotton,Gasket)
〖Function〗: The bottom cotton mainly eliminates the noise in the cavity between the PCB and the bottom case. Switch Pad can reduce the gap between the switch. Silencer pad is filled between PCB and positioning board to reduce cavity noise. The function of the gasket is also to silence the sound..
〖Features〗: For mechanical keyboard enthusiasts, purchasing a four-piece set of sound-absorbing cotton can save consumers more time and improve their purchasing experience..
〖Material〗: These products are made of soft sponge material, which will neither damage your PCB board, but also have the effect of noise reduction..
〖Notice〗: The four-piece sound-absorbing cotton set includes bottom cotton, switch pad, silencer pad and gasket. If you want more details, please check in the product description..
Aeronautical Receiver, Squelch Function Electrical Aeronautical Receptor Kits for Aircraft and Tower Calls for 97 X 40 X 75mm Aluminum Chassis
The kit uses a band-pass filter, 3355 high-amplifier, NE602 mixing, MC1350 mid-amplifier solution, which can receive AM signals of 118-136MHz..
Directly printing inductor traces on the PCB board greatly simplifies the difficulty of assembly..
The AGC circuit on the board ensures comfortable listening, while the squelch function avoids long-term noise..
12V power supply, 9.2 x 7.5cm PCB board size, which can be directly used in 97 x 40 x 75mm aluminum chassis.
It is specially used to receive the call between the aircraft and the tower. With the antenna with good performance (VHF band Yagi antenna), the open area can receive various types of aircraft and tower calls within about 190Km. Please pay attention to your favorite friends..
Fielect 1.5mm Carbon Fiber Rod for RC Airplane Matte Pole Length 400mm 15.7 inch 10pcs
【Features】- The carbon fiber rod has good heat resistance, corrosion, rubbing performance, high strength, stable and surface smoothness..
【Advantages】- Carbon fiber bar is vert lightweight, lighter than aluminum, yet stronger than steel..
【Application】- Carbon Fiber Rod are suitable for aviation model aircraft, model cars, multi-rotor support rods, model boats, racing cars, robots, DIY aircraft production, 3D printers, arrow rods, kites, windmills, sails, DIY subject support poles, mosquito nets, Tents, bows, hatches, PCB equipment shafts, luggage, hand rods..
Original Sanwa Denshi TP-MA Replacement PCB with Microswitches.
Replacement microswitch PCB for Sanwa JLF series Joysticks.
Often the PCB is the first to go out on a Sanwa JLF in a few years. Restore it to brand new by getting the Sawa TP-MA PCB assembly. This replaces the entire set of microswitches and PCB, and housed in very easy to install module..
Installation: Remove the Sanwa JLF lever restricted Remove the TP-MA board that comes from the Sanwa JLF lever Place the new board pointing in the same direction as the previous one. Finally place the restrict again.
Package include One pcs Original Sanwa TP-MA PCB with Microswitch.
4 Pieces Set of Silencer Pad Silencer Foam Sound Dampeners Sheet for Mechanical Keyboard, Compatible with 61 Keys Layout(Switch Pad, Silencer Pad, Bottom Cotton,Gasket)
〖Function〗: The bottom cotton mainly eliminates the noise in the cavity between the PCB and the bottom case. Switch Pad can reduce the gap between the switch. Silencer pad is filled between PCB and positioning board to reduce cavity noise. The function of the gasket is also to silence the sound..
〖Material〗: These products are made of soft sponge material, which will neither damage your PCB board, but also have the effect of noise reduction..
〖Compatibility〗: Compatible with 61-key mechanical keyboard layout..
〖Features〗: For mechanical keyboard enthusiasts, purchasing a four-piece set of sound-absorbing cotton can save consumers more time and improve their purchasing experience..
〖Notice〗: The four-piece sound-absorbing cotton set includes bottom cotton, switch pad, silencer pad and gasket. If you want more details, please check in the product description..
Bejavr M.2 NVME to PCIe 3.0/4.0 x4 Adapter, NVME/AHCI SSD to PCIe Expansion Card with Aluminum Heatsink Solution, Supports PCI-Express X4 X8 X16 Slots
NVMe PCIe Adapter Apply to 2280/2260/2242/2230mm M.2 NVMe and AHCI SSD, Adapter with Aluminum Heatsink Solution..
M.2 PCIe Adapter Supports PCI-Express X4, X8, X16 slots. PCIe 4.0 lanes with up to 64Gbps bandwidth, backward compatible with PCIe 1.0 2.0 3.0, Full release the speed of PCIE 3.0/4.0 X4 Full Speed M.2 PCIe SSD, such as 64Gbps M.2 PCIe 4.0 SSD..
PCIe NVMe Adapter Supports Windows 11/10/8、Windows Server 2012 R2、Linux、Fedora、SUSE、Ubuntu、Red Hat（no driver required） NOTE: Go to NVMe SSD manufacture website for driver installation if your PC can not recognize NVMe SSD. Win7 and Windows Server 2008 R2 need additional driver for NVMe SSD..
PCIe NVMe 3.0/4.0 x4 Adapter with 2 thermal pads, You put one between the ssd and the carrier and one between the ssd and the heat sink..
Package Including: ➤1-M.2 PCIe Adapter x1.➤2-SSD Spare bolt（Pre-installed on PCB）.➤3-Low Profile Bracket x1.➤4-Screw Driver x1.➤5-Regular Profile Bracket x1.➤6-Heat conducting silica gel pad x2 （thick + thin）.➤7-Aluminum Heatsink x1.➤8-Heatsink fixing spring nails x2.➤9-PCB fixing screws x2.➤10-Bracket fixing screws x1..
