Best Aluminum Pneumatic Cylinder

Pneumatic Drum Sander Rubber Sleeve Tube Sanding Drum for Polishing Wood with Other Processing Materials(85mmx215mm)

  • ★Material: Rubber,Size:85mm x 215mmx26mm(Diameter x Height x Bore Diameter)+5pcs 85mm x 215mm(Diameter x Height x Bore Diameter) 120 Girt drum sanding sleeves..
  • ★The wear-resistant thickening rubber and aluminum shaft wheel are adopted to prevent rust and make it lighter, more efficient and durable..
  • ★The inflatable polishing air drum has elasticity, and the outer diameter can be adjusted through inflation and deflation, so that the sand cylinder is tightened to meet different polishing requirements..
  • ★Mainly used in furniture, wood, metal grinding and non-metal grinding industries, with the function of grinding planes, uneven surfaces, removing burrs, burr, pouring riser, chamfer, polishing, etc..
  • ★This pneumatic drum sander fills the airbag with gas, and then uses the same size of abrasive belt for polishing. Depending on the thickness of the belt, the product can be coarsely ground, medium and finely ground,so the polishing efficiency is high..
Check Stock

Kaleurrier Ergonomic Rolling Swivel Saddle Stool with Wheels,Hydraulic Pneumatic Lifting Height Adjustable Lightweight Chair for Clinic Hair Salon Massage Lab Kitchen Home Office Black Without Back

  • Comfortable - Features a ergonomic horse saddle seat with brand new dense sponge to encourage better posture & more comfort,ease your spine stress and....
  • Lightweight but sturdy and durable - Heavy duty stool is equipped with reinforced aluminum base,in solid structure for longevity,weighs only 9 lbs,but....
  • Safe & Smooth operating - Stool chair with SGS tested and certified pneumatic gas lift ,for explosion proof, safety use and smooth operating..
  • Convenience for mutiple tasking work - Seat is rotatable in 360-degree for easy direction,seat height is adjustable by gas lift cylinder from 22.5”....
  • Easty to instal & Warranty - tool-free simple assembly required with instruction included in the package.1 Year warranty. Customer service....
Check Stock

Pneumatic Clamp, 300mm SC3250 100PSI Professional Professional Pneumatic Hold Down Clamp

  • SPECS-- Length: 300mm / 11.8in, Air Inlet Interface: M10, Cylinder Specification: SC32*50, Maximum Working Pressure: 9Kgf/cm²(0.9mpa)100PSI, Movable Distance of Clamping Rod: 60mm / 2.3in, Clamp Screw: M8.
  • ADVANTAGES-- The pneumatic clamp helps ensure the machining accuracy of the workpiece, and can reduce the intensity of labor of workers.
  • MORE-- Base Fixing Screw: M6 * 4pcs, Base Fixed Screw Spacing: right and left(19mm / 0.7in), up and down(31.8mm / 1.2in, Package Weight: Approx.1084g.
  • EASY TO USE-- The 300mm professional hold down clamp has simple operation, and is easy to achieve automatic control.
  • SCOPE OF USE-- This 100psi pneumatic clamp can be used in welding, fixture, mold and other positions.
Check Stock

SWANLAKE 6.5 Liter Pneumatic/Manual Fluid Extractor Pump,Oil Changer Vacuum Fluid Extractor,Oil Change & Fluid Change Tool

  • Pneumatic mode and manual mode to fit all situation. The manual mode could be used by itself without any other equipments.The pneumatic mode turns the pump into a high-speed oil changer as long connect with air compressor..
  • 6.5L vacuum fluid extractor comes with 5 different diameter tubes go to the bottom of oil pan. also 3.2 feet flex hose and 3 extra dipstick hoses to reach the bottom of the reservoir and suck up all fluid..
  • Fast suction speed of 1.8L/min. The oil change pump extracts engine oil from a 4-cylinder car in a couple of minutes in pneumatic mode..
  • Use this oil extractor pump, the engine oil and transmission fluid could be extracted directly by the dipstick tube, the sealing cap is attached to stop the liquid from spill during transportation..
  • Its a perfect tool for working on vehicles anytime and anywhere.no need to lift up or crawl under the car to drain out the oil.NOTE:fluids with high volatility, high corrosion, high alkalinity and high temperature CANT be used..
Check Stock

Kastele KASTELE Ergonomic Saddle Stool Swivel Rolling Saddle Chair Hydraulic Adjustable Stool with with Backrest

  • Ergonomic Saddle seat to hold you at proper posture for back support and spine support, gives backpain relief. Permanently molded denser foam pad, coated with premium PVC leather - ensure comfort for years.
  • Swivel seat and pneumatic height adjustable from 19'' to 28'' by SGS certified pneumatic cylinder - fit for various needs with super safety.
  • Reinforced sturdy steel base - provide extra stability and longivity. Upgraded with foot rings - sturdiness and enhance the comfort.
  • Quality duel swivel caster wheels - support move around freely and rolls easily at all floors and carpets.
  • Tool-free easy assembly - get a perfect stool with simple 2 steps assmbly per instructions in the package, no tools request.
Check Stock

Jackma555 6.5L Pneumatic/Manual Oil Extractor Pump for Automobile Fluids Vacuum Evacuation + Brake Bleeder Hose

  • 【 Work Freely 】 Not limited to places, change oil anytime and anywhere! With the Oil Extractor Pump, you no longer have to lift or crawl under the car to do fluid changing, and there is no mess to clean afterward..
  • 【 2 Operating Modes 】 The fluid evacuator equips with pneumatic and manual mode to fit any condition. The pneumatic mode turns the oil transfer pump into a high-speed oil changer while the manual mode requires no other equipment to use..
  • 【 Speedy Extraction 】 Fast suction and extraction speed of 1.8L /min. The oil changer extracts engine oil in a 4 cylinder car within minutes at pneumatic mode and leaves no mess to clean afterward..
  • 【Wide Application 】 Perfectly extracts most fluid types: engine oil, transmission fluid, gear oil, coolant, and power steering fluid. Applicable on cars, lawn mowers, boats, jet skis and etc. It is perfect for working on cars in the garage or automobile repair shops..
  • 【 Note】Gasoline, and fluid with high volatility, high corrosion, high alkalinity, high temperature are FORBIDDEN to be applied on the extractor. If there is any problemor concern with our products, please contact us for assistance..
Check Stock

Enkelbruke Pneumatic Clamp, GH-12130 Professional Cylinder Pneumatic Hold Down Clamp, 230kg Clamping Force

  • FUNCTIONS -- The hold down clamp can not only reduce the intensity of labor of workers, but also help ensure the machining accuracy of the workpiece..
  • ESSENTIAL TOOL -- The toggle clamp is a essential clamping tool that can help achieve automatic control..
  • HIGH EFFICIENCY -- The cylinder pneumatic clamp can largely shorten the test time and improve the production efficiency..
  • 230kg CLAMPING FORCE -- With a total length of 300mm and a maximum clamping force of 230 kg, the clamp helps to ensure the machining accuracy of the workpiece.
  • APPLICATION -- This pneumatic lever clamp is used for mass production, and the workpiece station that needs to be positioned and clamped can be used. It is commonly used in stations such as welding, gages, and molds..
Check Stock

ABN Pneumatic Vacuum Brake and Clutch Bleeder Kit, 0.75 Liter – Master Cylinder 90–120 PSI Air Pressure Fluid Bleed Tool

  • QUICK BRAKE BLEEDING: The ABN Pneumatic Vacuum Brake and Clutch Bleeder Kit, 0.75 Liter – Master Cylinder 90–120 PSI Air Pressure Fluid Bleed Tool works with your air compressor to quickly bleed those stubborn brake lines.
  • Easier to use and less messy than an inconvenient hand pump.
  • EASY TO USE: Select a fill bottle adaptor for the master cylinder to hold it in place, fill the bottle with fluid, pop it on the master cylinder and open the valve.
  • Once the master cylinder is filled, the bottle flow will stop so you can connect the vacuum jar to an air compressor (not included), connect the bleed hose to the brake bleeder and open bleeder, then pull trigger on jar and lock in place, let it draw for 4-5 minutes, close bleeder, and check brake pedal pressure.
  • ONE-PERSON JOB: Innovative bleeder design allows you to fully complete the job by yourself.
  • WORKS FOR YOUR VEHICLE: For use on motorcycle, car, and truck.
  • 90 to 120 PSI (6-8 bar) air supply requirement.
  • 25-ounce (0.75L) approximate refill container capacity.
  • Includes different adapter sizes to accurately fit your application.
  • CONTENTS: Package includes a brake and clutch bleeder, refill container, and plastic adapters.
Check Stock

Aircraft Tool Supply Rivet Removal Tool

  • Easily convert your cordless, pneumatic or corded drills into a power rivet nut setter.
  • Use 12V and up cordless drills for aluminum and steel rivet nuts, or 18V+ for larger sizes like M10 & 3/8" and/or stainless (drills must feature torque limiting clutch).
  • CNC machined from solid billet aluminum and features durable bearings.
Check Stock

Aluminum Can Crusher Pneumatic Can Crusher Automatic Can Crusher Heavy Duty Counter Can Crusher Hold 6 Cans With Automatic Can Eject Powered by Air Compressor For Recycling Soda Beer Cans Upto 16oz

  • ...sher, air compressor can crusher, the crusher can crusher, air powered can crusher, can ram aluminum crusher, heavy duty aluminum can crusher, can crusher aluminum countertop, soda can crusher, beer can crushers, cylinder can crusher..
  • MAINTENANCE FREE and LASTS LONGER The PNEUMATIC SYSTEM requires no maintenance to operate and includes 3ft extra hose for replacement whenever necessary. Made of POWDER COATED STEEL to prevent from rusting. THICKER STEEL CONSTRUCTION for long lasting usage..
  • EASY TO ASSEMBLE and EASY TO USE Assemble this can crusher in less than 5 minutes with our step-by-step instruction manual and connect to an air compressor for operation. Crush cans just by pressing the PUSH LEVER unlike others with a hard press button..
  • PERFECT GIFT for your friends and family to save remarkable storage space at their homes and garages. Comes with an attractive ready to gift color box. In the unlikely event you aren’t delighted with the product, you can return for a full refund or replacement..
Check Stock