Vilros Raspberry Pi 4 Compatible Use and Store Case with Preinstalled Fan (Black)
VILROS PI 4 COMPATIBLE USE AND STORE CASE: Plastic Storage case is best for those who want to be able to store their raspberry pi in a convenient all in 1 package when not in use.
USE YOUR PI: Case Holds the Pi with full access to all the ports, in addition you can open the cover and access the GPIO pins for any project.
STORE YOUR PI AND ACCESSORIES :The case has enough room to store the power supply, cables and other pi essentials etc..
KEEP YOUR PI COOL: The case features a preinstalled fan on the cover that can easily be hooked up to the Raspberry Pi for maximum cooling and ventilation.
EASY TO SET UP: Includes a EBOOK download code for the Vilros Raspberry Pi Quickstart Guide 2nd Edition (Updated for Pi 4) --also includes a screwdriver, screws and clear instructions for assembly..
Smraza Raspberry Pi 4 Case, Acrylic Case for Raspberry Pi 4B with Cooling Fan 35mm, 4pcs Heatsinks, 5V 3A Power Supply for Raspberry Pi 4 Model B, RPI 4 8GB/4GB/2GB(RPI Board Not Included)
Only For Raspberry Pi 4 - Raspberry pi 4 model b case is made of acrylic, the RPI 4B case won't block Pi's Wifi or Bluetooth signal. Note: RPI board NOT included, and this case is not suitable for pi 3..
Easy Installation with Buckle Design - 3-layer pi 4 case just need 3 steps to install. The buckle design makes it easier to install and disassemble..
Easy to Access to All Ports - It can be access to all ports of Raspberry Pi board, such as cut-outs for the dual micro HDMI, Audio/Video, USB and Ethernet ports, as well as the USB-C power connector and access to the micro SD card..
Always Keep Raspberry Pi 4 B Cooling - Fan size: 35×35mm. The DC5V 2 pin quiet cooling fan and 4pcs heatsinks are good for heat dissipation of Raspberry Pi board..
Easy to Turn On/Off Your Pi - The 5V 3A raspberry pi 4 power supply with a handy on/off switch on the 59 inches cable. Control the power on/off of your pi 4 board through pressing the button..
GeeekPi Raspberry Pi Cluster Case, Raspberry Pi Rack Case Stackable Case with Cooling Fan 120mm RGB LED 5V Fan for Raspberry Pi 4B/3B+/3B/2B/B+ and Jetson Nano
Wide Application --- The new 4-layers cluster case is designed for Raspberry Pi clusters, Raspberry Pi NAS servers, Jetson Nano clusters, and disk array clusters to to provide shell protection and cooling solutions. It’s compatible with Raspberry Pi4B/3B+/3B/2B/B+, 2.5MM HDD, Jetson Nano (Note: Not for Raspberry Pi Zero).
Simple Installation --- The long fixing screws are designed with flat head screws, smooth and easy to install. The fool-proof design of the positioning holes can prevent you from having trouble during installation. A variety of screws with different specifications can meet your various product fixing needs. For example, Raspberry Pi, 2.5-inch hard drive, 3.5-inch hard drive, Jetson Nano and so on..
Better Cooling Effect --- With 120mm 5V RGB LED Fan for better heat dissipation.
This case is open on three sides with each acrylic layer containing enough space for maximum air flow for each Raspberry Pi.
With a large fan on one side to flow strong wind for reducing the temperature of each Raspberry Pi.
Good compatibility with Raspberry Pi --- It can be access to all ports of Raspberry Pi board, such as GPIO port, HDMI port, USB port, SD Card slot and so on. It’s also compatible with the latest Raspberry Pi 4 Model B and Raspberry....
GeeekPi Raspberry Pi Cluster Case for Raspberry Pi 4 Model B, Raspberry Pi Case with Cooling Fan and Raspberry Pi Heatsink for Raspberry Pi 3 Model B+, Raspberry Pi 3/2 Model B
Compatible with Raspberry Pi 4 Model B & Raspberry Pi 3 B+ & Raspberry Pi 3/2 Model B.
Access to all ports and slots of Raspberry Pi, including SD card slot, GPIO port, USB ports, HDMI port and so on..
The case includes cooling fans and heatsink for cooling down your Raspberry Pi better. The metal protective cover on the top will protect the cooling fan against being destroyed..
The stackable case can provide you with an environment to put four pieces of Raspberry Pi board together. The instruction manual will tell you how to assemble step by step..
Package Includes: 5x Acrylic Plates, 4x Cooling Fans with Metal Protective Cover, 12x Heatsinks for Raspberry Pi 3B+/3B/2B,16x Heatsinks for Raspberry Pi 4 Model B(Added on 2019.8.2), 1x Screw Set, 1x Screw Driver,1x Instruction Manual.
GeeekPi Raspberry Pi 4 Case, Raspberry Pi 4 Case with Fan 40x40X10mm (Blue Backlight) and 4pcs Raspberry Pi 4 Heatsinks for Raspberry Pi 4 Model B (Blue&Clear)
Super Quiet 4010 Fan with Blue Backlight (Fan size:40x40x10mm).
With cooling fan for heat dissipation of Raspberry Pi.
Includes heatsinks for better heat dissipation.
High quality clear acrylic and blue ABS material.
Access to all ports of Raspberry Pi board.
Package Includes:1 x Blue ABS Acrylic case for Raspberry Pi 4B ,1 x 4010 Fan with blue backlight pack ,1 x Screw driver ,4 x Aluminum heat sinks ,1 x Instructions.
GeeekPi New Raspberry Pi Cluster Case, Raspberry Pi Rack Case Stackable Case with Cooling Fan 120mm RGB LED 5V Fan for Raspberry Pi 4B/3B+/3B/2B/B+ and Jetson Nano (12-Layers)
Wide Application --- The new 12-layers cluster case is designed for Raspberry Pi clusters, Raspberry Pi NAS servers, Jetson Nano clusters, and disk array clusters to to provide shell protection and cooling solutions. It’s compatible with Raspberry Pi4B/3B+/3B/2B/B+, 2.5MM HDD, Jetson Nano (Note: Not for Raspberry Pi Zero).
Simple Installation --- The long fixing screws are designed with flat head screws, smooth and easy to install. The fool-proof design of the positioning holes can prevent you from having trouble during installation. A variety of screws with different specifications can meet your various product fixing needs. For example, Raspberry Pi, 2.5-inch hard drive, 3.5-inch hard drive, Jetson Nano and so on..
Better Cooling Effect --- With 120mm 5V RGB LED Fan for better heat dissipation.
This case is open on three sides with each acrylic layer containing enough space for maximum air flow for each Raspberry Pi.
With a large fan on one side to flow strong wind for reducing the temperature of each Raspberry Pi.
Good compatibility with Raspberry Pi --- It can be access to all ports of Raspberry Pi board, such as GPIO port, HDMI port, USB port, SD Card slot and so on. It’s also compatible with the latest Raspberry Pi 4 Model B and Raspberr....
Retroflag NESPi Case+ Plus with USB Wired Game Controllers & Cooling Fan & Heatsinks for RetroPie Raspberry Pi 3/2 Model B & Raspberry Pi 3B+
NESPI CASE+ functional Power and Reset Button with Safe Shutdown ,specifically designed for Raspberry Pi 3B+, Raspberry Pi 3/2 Model B. This case DOES NOT include any Raspberry Pi products..
Easy access to the SD-Card and all other ports without opening the case.
NES case specifically designed for Raspberry Pi 3 B+ (B Plus) 2.
Game Controller: Compatible OS — WINDOWS98/2000/ME/XP Mac os .xv10.2.8.
Game Controller: Fully tested to work with the Raspberry Pi 3B+ and Retropie. Plug and Play.No extra drivers needed!.
