BonyTek 2 Pack Aluminum Alloy Flag Pole Rings, 360 Degree Rotating Flagpole Flag Mounting Rings Spinning Flag Pole Kit with Carabiner for 0.75-1.00 Inch Diameter Flagpole (Φ 1 inch, Silver)
Anti-wrap Design: The 360 degree free rotation stainless steel ring ensures strength and hardness. At the same time, the excellent anti winding performance can make the flag fly freely in the wind and prevent the flag from winding the flagpole..
Durable Design: The high-quality aluminum alloy ring body and stainless steel ring design make the flagpole ring durable, light, no rust, no flading, no deformation and no cracking. They can adapt to all kinds of harsh environments..
Adjustable Screw: Use 2 screws to adjust the diameter of flagpole ring. The long screw is suitable for 0.75 inch flagpole, while the short screw is suitable for 1 inch flagpole. You can install flagpole in the 0.75-1.02 inch diameter range..
Hook Design: 2 pack aluminum mounting rings and 2 piece aluminum hooks for you. You can link the flagpole ring hole and the flag with the hook..
Install Note: Please pay attention to the installation direction of the flagpole ring and ensure that the position of the ring is relatively inward..
Knob for Bottle Jack Valve Release Screw On Harbor Freight Hydraulic Press Made of 6061 Aluminum (3/8\)
hydraulic jack valve release screw knob comes in two sizes to either the jack screw with a 3/8" and 7/18" diameter valve release screw.
It is machined from a solid bar of 6061 aircraft quality aluminum, The knob also has a longer knurled section ,for extra grip..
It slides on over the release screw, turns 1/4 turn then secured in place with a set screw (included) from the end of the knob. You will need to use a 5/32 hex key (Allen wrench).
This particular part is designed for the Harbor Freight Hydraulic Bottle Jack used in the 6, 12 & 20 ton arbor presses but will work on any bottle jack with a 3/8 and 7/18" diameter valve release screw having a.
DO NOT USE WHEN LIFTING VEHICLES: ONLY TO BE USED ON HYDRAULIC PRESS APPLICATIONS!.
M8 8mm Rear Shock Extender Absorbers Universal Motorcycle Riser Heightening Adapter High Damping Device Thicken Pad Chassis Extender Taper Riser With Screws(Black)
【Fitment】Fit for all M8 Shock Absorber,shock absorbers with a diameter of 8mm.If the shock absorber of your is half-thread screw(the front thread diameter is 10mm,the rear thread diameter is 12mm),please enlarge the screw hole by yourself to install it.Aluminum shock absorber height extension riser is universal for / Pit Dirt Bike /ATV / Quad etc.Please confirm the size before buy it..
【Material】Constructed of high-strength machined aluminum alloy, rigid and durable.Excellent processing performance, good corrosion resistance, no deformation after long time use..
【Function】It can increase by 30~50mm,brilliant height extension effect for damping protection, makes the vehicle easy to hold traction on the steep hill.Buy it and maximize driving pleasure without overloading your body.Easy and fast to install with simplify structure, perfect replacement for your old or broken..
【Package】1 Pair Shock Absorber Riser Extenders +1 Pair M8 Screws.Our design team has equipped the set with a screw for easy operation.Screw hole diameter: Approx. 8mm/0.314in.Not only increases the ride comfort, but also the easy assembly and disassembly..
Bipod Surveying Thumb Realease, Aluminum Bipod for Prism Poles Land Survey GPS Poles of Total Station GPS GNSS Rods (bipod)
Surveying bipod :- Aluminum bipod stand for prism poles, gps rods , GNSS poles etc is designed with an adjustable rectangular thumb screw head and a thumb release locking system. The thumb screw clamps can hold a rod up to 1.5" wide . This allows this aluminum bipod to be used with most standard leveling rods, prism poles.
Land Survey Surveying Bipod Legs extend up to 6 feet and collapses to 3.5 feet making it easy to set it up anywhere and make leveling super easy. Perfect for use with Total Station, GPS , GNSS.
Surveying Bipod Quick and easy set up Easy to carry. If you work alone and cannot afford the luxury of a rodman then this bipod is a perfect solution for your problem. You will not only be able to work alone with out any help but your work will be super easy and nothing less than perfection..
Surveying Bipod Open thumb screw head, Aluminum frame.Guaafa bipod are intended for barcode rods and leveling rods. We at GUAAFA aim at making quality surveying tools at affordable prices. Easy and perfect tool to use when you are by yourself and have to level or transit to shoot some elevation..
Prism pole shown in the images is not included. it is there to just demonstrate to you how the tripod looks after the prism pole is inserted in it.
50pcs Helical Threaded Inserts Stainless Steel Coiled Wire Helical Screw Thread Inserts M8 x 1.25 x 1.5D Length
WIDELY USED:Stainless steel thread inserts used in low strength materials such as aluminum, magnesium, can avoid thread damage and get a good connection performance, to enhance connection strength and improve connection condition..
USED FOR PARTS:Used for parts that requires frequent removing, it can greatly improve service life and wear-resistance of screw thread..
A CERTAIN ELASTICITY:Because of a certain elasticity, thread insert can even the load distribution on each thread, eliminate pitch and tooth deviation between screw and screw hole, and absorb vibration, thus increasing the screw thread connection strength and fatigue resista.
ADVANTAGE :It can prevent screw from getting loose, especially used for products requiring high coefficient of insurance..
EASY TO MAINTENANCE:Easy to maintenance, install a thread insert into a damage screw hole, then the screw hole can be used as normal, in order to avoid workpiece loss..
CZH-LABS RPi Screw Terminal Block Breakout Module with Aluminum Enclosure for Raspberry Pi 1 2 3 Model B/B+
RPi Screw Terminal Block Breakout Module with Aluminum Enclosure. With the adapter module you can easily extend Raspberry-Pi projects to industrial....
Terminal block pitch 3.5mm/0.138", wire size range 26AWG to 16AWG, strip length 5mm, screw M2 steel, pin header and cage copper. Standard IDC40 pitch....
Support for Desktop, Panel mount, Wall-mount or DIN rail mount. DIN rail mount supports vertical or horizontal place mounting. Can support width 35mm....
Enclosure: High quality aluminum enclosure, thickness 1.5mm/0.06", with attractive and extremely durable powder coat painting and clear laser marking....
Gurmoir Metal Cage for GoPro Hero 8 Black Aluminum Alloy Back Door Protective Housing Case Video Cage with 52mm UV Filter for Go Pro 8 Rock Solid and Heat Dissipation Blue
【Classic Blue Aluminum Alloy Case.Compatible with Gopro Hero 8 Black Action Camera】This Aluminum Housing Designed for Gopro Hero 8 Black Action....
【With 52mm UV Filter +Allow 3 Sides to Mount the Protective Case, Meet Your Different Shooting Requirement,】The case comes with a 52mm UV Filter.....
【With Metal Back Door,A Security Door for your Gopro's Safety】with aluminum alloy back door.your Gopro camera will be more safety during....
【Universal 1/4 inch screw hole and Cold Shoe Mount 】☛with 1/4 inch screw hole. the case can compatible with any 1/4" tripod. or you can DIY your....
【More Durable Than Plastic Case + Multifunctional Essential Metal Case with Bottom Hollow Design to Prevent Your Camera Overheating】Aluminum alloy....
NEIKO 50484A Internal Hex Allen Set Screw Assortment Kit, Coarse and Fine Thread Screws with Full-Steel Construction, 200-Piece Set
ASSORTED SCREWS SET: Our Internal Hex Allen Set Screw Assortment Kit has the screws you need for any task. This 200-piece screw kit includes standard SAE sizes for your convenience. Use these sturdy, small screws for personal or work projects..
HIGH-QUALITY STEEL SCREWS: Each screw in this screw set is constructed with durable steel that won’t strip as easily as plastic or aluminum. These heat-treated and hardened steel screws provide a strong hold..
HEX ALLEN SCREW SET APPLICATIONS: With the included SAE screw assortment, you can use these fasteners anytime, anywhere. Build a deck, frame wood, install plywood, and work with confidence with this versatile hex Allen screws assortment..
EASY STORAGE & TRANSPORT: Our screw set assortment kit includes 3 fine thread sizes and 9 coarse thread sizes. It comes with a hard plastic case with an organizational chart inside the lid to help you identify which screw you need..
SIZES: This set includes the following SAE sizes: coarse 5/32" x 3/16.
The 30 Black Panther Hookah Aluminum Black Hookah Set & Washable Silicone Hose
30 -inches of pure hookah magic with a signature style and beauty .Easy to assemble The pole and base connection with a quick Screw system. The hose....
100% washable Hookah Hose BLACK SILICON WASHABLE HOOKAH HOSE:Just clean silicone hose and the metal handle with water after use.
With a thick glass base adding extra curve your smoking enjoyment will always be enhanced by this unique expression and design.
Aluminum Hookah Rust Resistant .With an Unbreakable Silicone Hookah Bowl.
Aluminum Pro Quality 1-Hose Hookah Shisha Nargila - The stem is fixed to the base with a screw system, combined with grommets ensuring a perfect water....
iShoot Foldable Telephoto Lens Bracket, All-Metal Long-Focus Lens Support, Lens Holder with 20cm Quick Release Plate for Arca-Swiss Fit Tripod Ball Head, Compatible with Canon Nikon Sony Cameras
1. All parts of the foldable telephoto lens bracket are die-casting of aluminum alloy, surface polished, high temperature automotive painted, lightweight and rugged, weight about 520g.
Both sides with precision scales, skeleton structure in whole, designed with spirit level.
2. Quick release plate of the long-focus lens support is die-casting of double aluminum plates of 7.5mm thick, 200mm long and 38mm wide, with RRS / ARCA-SWISS Standard interface.
back side with two 3/8 " screw holes, two 3/8" to 1/4" adapter screws provided.
3. Knob between the two plates is for locking lens, about 50mm in diameter, built-in 1/4" screw.
Pallet is die-casting of double aluminum plates of 8mm thick, built-in self-locking device.
4. Aluminum tube?s height can be adjusted to adapt to different volumes of the camera body.
built-in a metal shaft, one end is 1/4" screw, and the other end is butterfly-type knob.
5. Quick release plate is RRS / ARCA-SWISS standard fit, compatible with RRS / ARCA-SWISS / KIRK / Wimberley / MARKINS / SUNWAYFOTO / kangrinpoche / BENRO / SIRUI / MARSACE ball head and clamp of AS standard, suitable for iShoot IS-JZ30 / IS-JZ50 / IS-JZ64 / IS-QJ58 / IS-QJ64 / IS-JZ60BK etc..
