VEVOR Woodworking Vise, 9 Inch Woodworking Bench Vise Heavy-Duty Cast Iron Wood Working Vise, Quick Release Woodworker's Vise 10' Jaw Opening, Front Screw Vise for Woodworking, Cutting, and Drilling
9 Inch Professional Use: Jaw width: 9"/230 mm. Jaw opening: 10". Throat depth: 4". Weight: 35.0 lbs. Our professional-grade woodworking vise is built to exact specifications for optimal performance. Get ample holding power and increase your cutting accuracy with half the effort..
Superior Iron Structure: Our heavy-duty woodworking bench vise is constructed out of cast iron and has polished guide rods designed for rugged use and extended life. The end stop prevents the vise from being opened too far..
Convenient Operation: The quick-release mechanism enables you to utilize this woodworker's vise quickly and efficiently. Pull up on the handle and hold.
this will cause the vise nut to disengage. Adjust the jaws to the appropriate opening and let go of the handle. A simple turn of the main handle will engage the screw and tighten the vise on the product..
Simplified Installation: This wood working vise comes with pre-drilled holes in the baseplate for quick mounting to your workbench or machine table. The jaws are also pre-bored to enable the installation and attachment of custom non-marring jaw faces to secure workpiece materials..
Widely Applied: The woodworking front vise is suitable for home, woodworking studios, teaching equipment, and fixed for process....
ABN Professional Brake Line Flaring Tool Kit 45 Degrees - Single Bubble Double Flare Tool Kit for Steel Copper Tube
...e lines, the ABN Professional Brake Flaring Tool Kit adds a flare (makes tubing wider) to brake line end for a leak-free connection without hours of hand cramping or twisting exercises.
[Fits Your Application]: 45-degree set creates single, bubble, and double flares on steel, stainless steel, and soft metal (copper, aluminum) brake lines, transmission cooler lines, and fuel lines.
For 3/16-inch (4.75mm), 1/4-inch (6.35mm), 5/16-inch (8mm), and 3/8-inch tubing.
[Use Your Vise]: Use on a bench-mounted vise in your workshop or on a hitch-mounted vise in the field (not intended for use under car).
6-inch (15.2 cm) T-handle screw clamp holds die and tube in place so you can create flares quickly and easily.
[Durability You Need]: Deburred square pipe end with outer edge chamfered approximately 0.25 x 45 degrees.
Each die block is 1.7 inches (4.3 cm) long.
Approximate 1.5-inch (3.8 cm) actual clamping surface [we recommend only placing bends in the last 2.5 inches (6.4 cm) of tube after flared].
[Package Contents]: Brake line flare kit includes (1) brake line flare tool with T-handle and 11-inch lever with 5-inch texturized rubber sleeve (27.9x12.7 cm), (4) end dies, (1) instruction manual, and (1) 14.1 x 6.1 x 3.5 inch (35.8x15.5x8.9 cm) plastic blow-molded c....
HOW TO USE: Make sure vise is securely mounted to the workbench and the swivel base lock is secure. Open the vise by turning the vise handle counterclockwise. Place item between the serrated jaws. Close the vise by turning the vise handle clockwise until the item is snug in the serrated jaws, continue to tighten until you can no longer move item. Don't over tighten as this may damage item and or the vise. When finished working on the item, turn screw handle counterclockwise to release the item..
YOST VISES QUALITY: Every Yost Vises tool is engineered to have high standards of quality, strength, and durability. We value quality over quantity and manufacture products that are safe and easy to use. We offer lifetime tech support to back our quality guarantee..
SAFETY INFORMATION: Misuse of vises can cause serious injury to eyes, hands and or other body parts. Vises must be set up and used properly. Before setup and use, read, understand, and follow all ins....
Yost Vises 750-E Multi-Jaw Rotating Vise System | 2 in 1 Multipurpose Bench and Pipe Vise | Secure Grip with Swivel Base | Made with a Combination of Ductile Iron & Hardened Steel | Medium Blue
MULTI-JAW VISE: The Yost Vises 750-E 5 Inch medium duty 60,000 PSI ductile iron cast vise has a dual jaw system equipped with a bench jaw to perfectly secure your wood or metal works as well as other manufacturing applications and a pipe jaw for your piping and tubing projects such as cutting or threading. Also has a large anvil work surface..
SWIVEL BASE AND VISE HEAD: 360 Degree rotatable swivel base with dual lockdowns. Head of vise rotates a full 360 degrees..
HOW TO USE: Make sure vise is securely mounted to the workbench and the swivel base lock is secure. Open the vise by turning the vise handle counterclockwise. Place item between the serrated jaws. Close the vise by turning the vise handle clockwise until the item is snug in the serrated jaws, continue to tighten until you can no longer move item. Don't over tighten as this may damage item and/or the vise. When finished working on the item, turn screw handle counterclockwise to release the item..
YOST VISES QUALITY: Every Yost Vises tool is engineered to have high standards of quality, strength, and durability. We value quality over....
Yost Vises M7WW Rapid Action Woodworking Vise | Quick Release Lever for Quick Adjustments | 7 Inch Jaw Width | Made with Heavy-Duty Cast Iron | Blue
WOODWORKING VISE: The Yost Vises M7WW 7-inch Rapid Action Woodworking Vise is made from 30,000 PSI cast iron with chrome plated steel sliding T-bar handle and steel guide rails. Has a rapid action lever for quick adjustments..
HOW TO USE: To open the vise turn the vise handle counterclockwise. This will move the front jaw away from the stationary jaw to close and turn the vise handle counterclockwise. To use the quick-release feature of this vise, move the lever toward the vise handle. This will disengage the nut and allow you to quickly open or close the vise. The bench dog can be moved in position by loosening the finger bolt on the front of the vise..
YOST VISES QUALITY: Every Yost Vises tool is engineered to have high standards of quality, strength, and durability. We value quality over quantity and manufacture products that are safe and easy to use. We offer lifetime tech support to back our quality guarantee..
SAFETY INFORMATION: Misuse of vises can cause serious injury to eyes, hands and or other body parts. Vises must be set up and used properly. Before setup and use, read, understand, and follow all instructions outlined in the manual..
4 Pcs Anchor Wire Vise Anchor Vise Grape Trellis 9 Gauge Metal Wire Galvanized Solid Wire for Tightening 8~11 Gauge Wire to Build Trellises, Vineyards, Fences and Arbors
Sufficient Quantity: our anchor clamp set includes 4 pieces anchor wire vises and 1 bundle of galvanized iron wire, the vises are suitable for 8 to 11 gauge wires, they are enough to meet your work and replacement needs.
Reliable Material: these anchor cable vises are made of aluminum, and the iron wire with galvanized technology has long term applicability.
The anchor cable vise can effectively avoid the iron wire from slipping out, so you can use it with confidence.
Size Information: the size of our wire cutters is about 6 x 3 x 3 cm/ 2.36 x 1.18 x 1.18 inches, they are suitable for 8 to 11 gauge wire, each wire vise is about 30 grams, the specification of iron wire is 9 gauge, each roll is 32.81 feet in length, the matching combinations are convenient for you to buy.
Wire Selection: it is recommended to use our galvanized metal wire, do not use wires with other coatings, in order to use wire cutters correctly, please pay attention and follow our suggestions.
Applicable Scenarios: our vise and bendable wire can be applied to build vineyards, fences, trees and so on, they can probably provide a nice using experience for your garden work.
Wedge Guys Rubber Vise Clamp for Golf Club Repair Regripping Reshafting Refinishing Custom Refurbishment & Replacement – Snugly Protects All Golf Club Shafts, Wedges Irons Drivers Putters & More
The Rubber Vise Clamp by Wedge Guys is an essential tool for those looking to keep their golf clubs protected while repairing, reshafting, refinishing, refurbishing, replacing, or regripping golf clubs in a bench vise..
HOLDS FIRM – At Wedge Guys we believe a firm shaft is better! The side ribs on the rubber vise clamp increases friction in your vise with less pressure while the diamond channel locks your shaft in place, keeping your club shaft more firm and steady while you work..
PROTECTED – Work on your golf clubs without worry! The Wedge Guys rubber vise clamp will help protect your golf club shaft against marring and guard against breakage..
MULTI-USE – The Wedge Guys vise clamp is 3.5” long, Made in the USA, and great for a variety of applications for use with any golf clubs including wedges, irons, drivers, putters, and more..
**Although the rubber vise clamp is made of high-grade thick rubber, prevents slippage, and keeps your club tight and protected in the vise during repair, be sure not to overtighten**.
Hakkin 32 Pcs Pin Vise Hand Drill for Jewelry Making, Mini Manual Drill Kit - 0.8-3.0mm HSS Micro Twist Drill, Pin Vise, Carving Clamp and PCB Drills, Rotary Hand Press Drill for Resin, Wood, Plastic
... resin, a mini carving clamp and 10 pcs 0.3-1.2mm PCB Drills. Our precise hand drill set make small holes easily in Resin, Pearls, Wood, Plastic, Polymer Clay, Bead, to make necklace, pendant, earring, bracelet, keychain, model, sculpture, etc..
【Ergonomic Design and Humanized Design】The hand pin vise is made of aluminum alloy. Easily adjustable 3 jaw chuck to clamp the drill and keep the drill upright. The adjustable range of the clamp is 0.3-3.4mm. The tail of the compact manual model hand drill can be unscrewed and the drill bit can be neatly stored inside, don’t worry about losing it. Pen size design, easy to carry and store..
【Mini Bench Clamp Instead of Hand Held】Hakkin jewelry drill bit set has an indispensable tool, that is mini bench clamp, its body is made of aluminum alloy, compact and handy, hold the item in position and prevent fingers from being hurt. The small drill press clamp supports 0 - 2.2 inch (0-57 mm), supports round, square and irregular objects, ideal for holding small parts, Watch repairing, Sculpture, Craft, Jewelry and DIY Carving..
【Many Sizes Bits】The jewelry drill is Includes 30 pieces of precision drill bits in 17 most used sizes to satisfy all you demand. Including 20 pcs 0.8-3mm HSS twist drill bits and 10....
VENTURES FLY CO. | Rotary Fly Tying Vise with Pedestal Base for Fly Fishing Kit | Tool for Tying/Making Flies with Materials: Marabou, Tungsten Beads, Hook, Feathers, Hackle, Using Bobbin & Scissors
✔ TRUE 360° ROTATION - The Flysmith fly tying vise rotates 360° around a single axis point. Allowing you to wrap materials around the hook with greater accuracy and efficiency. So you can eliminate tiresome hand-over-hand wrapping. Dual Adjustability Knobs allow you to change the tension of the rotation. From rock solid to near frictionless. Large Crank Handle allows for a firm grip when using the fly tying vise's rotary function..
✔ DURABLE & VERSATILE JAWS - Your vise only has one job – and it better do it well...holding the hook! The jaws on the Flysmith are made of a fine, hardened steel with anti-corrosive properties. Your jaws will last for life or we'll replace them under our lifetime warranty. The jaw is adjustable to accomodate a wide range of hooks size 28 - 4/0. Lastly, the vise has a smoothly balanced tension lever to add the perfect amount of tension to tightly hold the hook without slipping..
✔ LARGE PEDESTAL BASE - Vise sits on a large, heavy pedestal base. To securely hold your vise in place – without movement. Two cutouts easily store hooks and beads when tying. The vise is protected by a special protective coating tha....
Yost Vises 34C Combination Vise | 6 Inch Jaw Width Heavy-Duty Utility Pipe and Bench Vise |Secure Grip with Swivel Base and Large Pipe Jaw Capacity | Made with Ductile Iron | Blue
COMBINATION VISE: The Yost Vises 34C 6-inch utility combination pipe and bench vise are made from 65,000 PSI Tensile Ductile Iron body parts. It has hardened, replaceable steel pipe jaws as well as hardened steel flat serrated jaws and continuous rolled thread on the main screw. The pipe jaws are set back to allow for the machinist's vise use..
SWIVEL BASE: Interlocking swivel base with 360-degree motion and 2 lockdowns..
HOW TO USE: Make sure vise is securely mounted to the workbench and the swivel base lock is secure. Open the vise by turning the vise handle counterclockwise. Place item between the serrated jaws. Close the vise by turning the vise handle clockwise until the item is snug in the serrated jaws, continue to tighten until you can no longer move item. Don't over tighten as this may damage item and or the vise. When finished working on the item, turn screw handle counterclockwise to release the item..
YOST VISES QUALITY: Every Yost Vises tool is engineered to have high standards of quality, strength, and durability. We value quality over quantity and manufacture products that ....
