Rockville dB16 8000 Watt Peak/2000 Watt Dyno-Certified RMS Mono 2 Ohm Amplifier Car Audio Amp. Dyno Certified RMS Power Ratings: (Certified Dyno Test / Less than 1 % THD) (Use these ratings when comparing with top brands such as Kicker, Rockford Fosgate, etc). – 2 Ohm: 2000 Watts x 1 Channel 90dB. Under Voltage Protection at 10V. Over Voltage Protection at 16V..
Frequency Response: 15Hz – 250Hz. Damping Factor: >150 @ 100Hz. 200 Amp Maxi Fuse. Dimensions: (W x H x L) 9″ x 2.4″ x 19.8″. 0 Gauge Power Amplifier Installation Kit.
...W: Pair Rockville RKL65MBW 6.5 2-Way 700 Watt Marine Boat Speakers with LED Lights. CEA Compliant Power Ratings. Power Rating: 350 Watts Peak /85 Watts RMS Per Speaker. Total Power: 700 Watts. Beat sync LEDs flash to the rhythm of the music. You can select either red or blue color LEDs on the wire harness. No extra installation for the LED. It gets a power signal through your speaker wire..
Features of MS10LB: Rockville MS10LB 10" Marine Free Air Subwoofer with LED (Black). Free air subwoofer does not require any enclosure. Max Power: 2400 Watts. RMS Power: 600 Watts. Polypropylene cone with Rubber edge. 2.0" 4 Layer dual voice coil. Molded ABS plastic basket made with a special blend that is waterproof and un-breakable (if you literally jump on it, it will not break or bend). Magnet 80 Oz double stacked magnet..
Features of DBM50: Rockville DBM50 4000w Peak/980w Dyno-Certified RMS 5 Channel Marine/Boat Amplifier Amp+Mic. Dyno Certified RMS Power Ratings: (Certified Dyno Test / Less than 1 % THD) (Use these ratings when comparing with top brands such as Kicker, Rf Fosgte, etc). 2 Om 120 Watts x 4 + 500 Watts x 1.
WHAT MAKES IT SUPERIOR? New and Improved - KICKER's Workhorse Bass-maker. Features Forced-Air Cooling - 25% Cooler for Increased Reliability.....
Amplifier Kit Key Features of of RWK4CU: Rockville RWK4CU 4 Gauge 2 Channel Complete Car Amplifier Installation Kit 100% Pure Copper RCA Cables. 4....
Strand Count: 1862. BC-5W2 Compliant. Kit includes:. . 17 ft. Frosted Blue 4 gauge power wire with seamless crimp ring terminal. 3 ft. Frosted Gray 4....
Features of RXD-M2: Rockville RXD-M2 3000 Watt Peak/750w Dyno-Certified RMS Mono 1 Ohm Amplifier Car Audio Amp. Dyno Certified RMS Power Ratings:....
MTX TNP212D2 12\ 1200 Watt 4 Ohm Dual Loaded Car Audio Subwoofer Package with Sub Enclosure, Planet 1500W Monoblock A/B Amplifier & 8 Gauge Wiring Kit
COMPLETE SOUND PACKAGE: Upgrade your cars sound system with this complete package that includes MTX 12 inch dual loaded car subwoofer, a sub enclosure, Planet Audio monoblock amplifier and a complete 8 gauge amp installation wiring kit.
CAR SUBWOOFER: The MTX Terminator series subwoofer system includes 2 subs, sub enclosure and a car amp.
Boasts 1200 watts max power and 400 watts RMS.
Features rubber surround, polypropylene cone and a 2-inch aluminum single 4 ohms voice coil.
SUBWOOFER BOX ENCLOSURE: This MTX enclosure features solid MDF construction and thick black carpet.
Dimensions (H x W x D1 x D2): 14 x 29.69 x 13.5 x 11.13 inches.
CAR AMPLIFIER: Planet Audio Amplifier delivers 700 watts RMS x 1 @ 4 Ohm, 1100 watts RMS x 1 @ 2 Ohm, 2500 watts RMS x 1 @ 2 Ohm max power, 1500 watt max power.
Switchable input sensitivity: 100mV 2V or 2V 8V.
Dimensions (H x W x L): 2.19 x 10 x 10 inches.
INSTALLATION WIRING KIT: 20-foot 8 gauge red power cable.
SUBWOOFER: The subwoofer can fit into any space and features butyl rubber surrond, built in amplifier, vented enclosure design and comes with mounting....
SUBWOOFER DESIGN: The Butyl rubber surround increases subwoofer durability. The vented design also increases bass output.
SUBWOOFER RECOMENNDATION: 8 gauge power and ground wiring is recommended.
AMPLIFIER INSTALLATION KIT: 20 ft. 8 Gauge Red power cable, Competition high quality fuse holder, 1/4" Gold plated ring terminal, 3 ft., 8 Gauge Black....
ALPINE S-A32F 320w RMS 4-Channel S-Series Car Audio Amplifier Class D+Amp Kit
(1) Alpine S-A32F 320 Watt RMS 4-Channel S-Series Car Audio Amplifier Class D Amp. (1)RockvilIe RWK42 4 Gauge 4 Chan Car Amp Wiring Installation Wire Kit (2) RCA's. Install. Terminal Layout: One side. Small footprint for easy installation. Screw terminals (for speaker and power cables). General. Amplifier Type: Class-D (Digital). Channel Design: 4/3/2 Channel. Thermal Management Control. Top Mounted LED Power/Status Indicator. Speaker Level Input with remote turn on.
Crossover: Adjustable Low-pass (LPF) / High-pass Filter (HPF). Gain Control: Adjustable. Bass Control: Remote Bass Control (RUX-KNOB2) Ready. Max Power Output Ratings. Total Max Power: 640W. RMS Power Ratings. Per Channel into 2 Ohms, 14.4V (%THD+N): 4 x 80W. Per Channel into 4 Ohms, 14.4V (%THD+N): 4 x 55W. Bridged into 4 Ohms, 14.4V (%THD+N): 2 x 160W. Sound Tuning. Crossover: Variable LPF, 50-400Hz (-12dB/oct ). Crossover: Variable HPF, 50-400Hz (-12dB/oct ). General.
Power Requirements: 14.4 V.DC (9 - 16 V allowable). Input Sensitivity (RCA Input): Hi: 0.5 - 10 V Lo: 0.2 - 4.0 V. High Level Input with automatic power on. Cable size: Power Cable AWG 8, SPK Cable AWG 10. Frequency Response (+0, -....
Pyle Marine Receiver Speaker Kit - 2-Channel Amplifier w/ 6.5” Speakers (2) Waterproof Poly Bag 3.5mm Jack RCA Adaptor for MP3/iPod & Volume Gain Remote Control & Power Protection Circuitry - PLMRKT2A
POWERFUL 2-CHANNEL AMPLIFIER: The included amplifier provides up to 200-watt max power at 4 ohms on each channel. It also contains an electronic crossover network, adjustable high/ low-level inputs, and stereo RCA line-level inputs.
2 MARINE SPEAKERS: This kit includes a pair of 6.5″ two-way marine speakers finished a pristine marine white. Each speaker contains a high-quality polypropylene cone and 2″ polymer cone tweeter for deep lows, rich mids, and sweet highs.
BAG AND 3.5mm JACK: Pyle amplifier kit comes with a waterproof poly bag with 3.5mm jack stereo to RCA adaptor from your iPod/MP3 player to protect the device. You can also connect standard high and low-level inputs from a marine head-unit receiver.
VOLUME GAIN CONTROL: The gain control adjusts the overall level of the amplifier and achieves a balance with other loudspeakers in the system. The waterproof remote volume control will power off the amp when turned all the way down.
POWER PROTECTION CIRCUITRY: Pyle marine amplifier features power protection circuitry, and soft turn on/off that prevents from damaging your speaker equipment. Built-in mounting brackets and includes hardware for convenient installation.
Features of XMN502 RB:. . RMS Power Rating:. 4 ohms: 65 watts x 2 chan.. 2 ohms: 85 watts x 2 chan.. Bridged, 4 ohms: 175 watts x 1 chan.. Max power....
Sony's Automatic Thermal Control lowers the output when necessary to prevent sudden shutdowns. Single sided connections provide flexible installation....
Rockville RWK82 8 Gauge 2 Channel Car Amplifier Wiring Installation Kit. (1) 17’ High Grade Twisted Pair of 100% Copper RCA Cable. 17’ 8 Gauge....