Best Amplifier Module Circuit Boards

Sound Module, Support Any Format Recording Module 10 Second Recording Easy To Use for Record Video

  • Sound sensor module have small volume and low output noise, the fixed gain is 20dB, support 3.3v and 5v.
  • Low power consumption of sensor is easy to control, more stable and more efficient.
  • The sound sensor is suitable for assembly, and installed on various small equipment like microphone and robot.
  • Microphone sound sensor module possess small size, more stable performance and simpler installation.
  • This module uses professional microphone amplifier IC, which possess high sensitivity.
Check Stock

Douk Audio U5 Mini Fully Balanced Headphone Amplifier for XLR / 4.4mm Headsets

  • 【Fully balanced headphone amplifier】Adopting fully balanced amplifier circuit and innovative circuit design, the amplifier circuit of U5 always works at a high voltage of 24V even if input DC 5V, with wide frequency response extension, excellent transient response, excellent purity and transparency, and good dynamic range..
  • 【Easily to drive low or high impedance headphones】For a total power output of up to 1400mW under a 32Ω load, U5 can easily power headphones with any low or high impedance (18-600Ω). Volume knob allows you to smoothly adjust volume without any undesirable noise nor any channel imbalances..
  • 【Pure analog design to reproduce music truly】Pure analog amplification circuit and analog control, show you the truest sound, all aspects are in the top-class such as sound field, sound position, details etc.. Adopt original JRC4580 classical op amp, pluggable socket design, convenient to upgrade different op amps to enjoy other sound styles..
  • 【Most cost-effective amp on the market】Mini size and exquisite appearance, and with low distortion, high power and a pure, uncolored sound, you’ll experience subtle details and shocking swings in your music effortlessly. U5, the best helper for all xlr/4.4mm headphones to improve their soun....
Check Stock

4-Port Cable TV/Antenna/HDTV/Internet Digital Signal Amplifier/Booster/Splitter/Equalizer with Passive Return, F59 Terminators (Lindsay LSA84-EQ8)

  • This is a TV signal amplifier which provides one input and four outputs, for connecting multiple TV sets or cable boxes. Allows multiple devices to connect to an antenna or cable system without losing signal quality..
  • Amplifier includes an integrated equalizer which varies amplifier gain. The equalizer provides more amplification to high frequency signals, which tend to get weaker over long cable runs. All ports provide an amplified signal, with a minimum gain of +0dB @ 54MHz up to +7.5dB gain @ 1000MHz..
  • Suitable for Antenna or Cable TV use. Compatible With All Standard And Digital Cable TV Services, OTA Antenna Reception. Not compatible on systems with an existing amplifier or pre-amplifier. Not compatible with satellite systems..
  • Meets or exceeds all SCTE Standards. PTC Short-Circuit Protected UL Listed Adaptor - Self-resetting circuit protection provides safe protection against short-circuits to minimize outage times. Amplifier has 6 kV ring wave surge design for protection against voltage spikes. Operating temperature: -40 to +60 ºC (-40ºF to +140ºF). 15 PSI weather-tight seal..
  • Prevents image pixelation with digital cable, boosts antenna (OTA) signals for distribution to multiple TVs. May improve cable modem performance. May improve HDTV recepti....
Check Stock

LEE DAN PK-543A 5-4-3 WIRE APARTMENT INTERCOM AMPLIFIER

  • Integrated circuit amplifier including amplifier with frequency response adjusted for best voice articulation.
  • AC or DC operation with selectable timing.
Check Stock

Bluetooth Amplifier Board 25W+25W HF63 Dual Channel Audio Amplifier DC 10-25V Digital Amplifier Module with TDA7492P Chip

  • High Quality : The amplifier board adopts TDA7492P power amplifier chip, high quality electronic components and military grade PCB board, durable in use..
  • 2 Channel : This board is designed with dual channel output, 25W left channel and 25W right channel, high transmission rate and good sound quality..
  • Bluetooth Connection : The amplifier board is designed with Bluetooth V2.1 module and power supply reverse connection protection, convenient and safe to use..
  • Application : This digital amplifier board is suitable for upgrading and refitting the idle sound box and DIY production. It is suitable for speaker of 4Ω, 6Ω, 8Ω, 16Ω (8Ω is the best)..
Check Stock

4-Port Cable TV/Antenna/HDTV/Internet Digital Signal Amplifier/Booster/Splitter with Passive Return, F59 Terminators (Lindsay LSA84)

  • This is a TV signal amplifier which provides one input and four outputs, for connecting multiple TV sets or cable boxes. Allows multiple devices to connect to an antenna or cable system without losing signal quality..
  • Suitable for Antenna or Cable TV use. Compatible With All Standard And Digital Cable TV Services, OTA Antenna Reception. Not compatible on systems with an existing amplifier or pre-amplifier. Not compatible with satellite systems..
  • Meets or exceeds all SCTE Standards. PTC Short-Circuit Protected UL Listed Adaptor - Self-resetting circuit protection provides safe protection against short-circuits to minimize outage times. Amplifier has 6 kV ring wave surge design for protection against voltage spikes. Operating temperature: -40 to +60 ºC (-40ºF to +140ºF). 15 PSI weather-tight seal..
  • Prevents image pixelation with digital cable, boosts antenna (OTA) signals for distribution to multiple TVs. May improve cable modem performance. May improve HDTV reception. Includes Amplifier, Power Supply, and two 75-ohm terminators..
Check Stock

HiLetgo 5pcs Micro SD TF Card Adater Reader Module 6Pin SPI Interface Driver Module with chip Level Conversion for Arduino UNO R3 MEGA 2560 Due

  • The module (MicroSD Card Adapter) is a Micro SD card reader module for reading and writing through the file system and the SPI interface driver..
  • SCM system can be completed within a file MicroSD card .Support Micro SD Card, Micro SDHC card (high speed card)..
  • 3.3V regulator circuit: LDO regulator output 3.3V for level conversion chip, Micro SD card supply..
  • Level conversion circuit: Micro SD card to signal the direction of converts 3.3V, MicroSD card interface to control the direction of the MISO signal....
  • Positioning holes: 4 M2 screws positioning holes with a diameter of 2.2mm, so the module is easy to install positioning, to achieve inter-module....
Check Stock

Pro Co Low Profile XLR-XLR Microphone Cable - 1 foot

  • Fit for shotgun microphones, studio harmonizers, mixing boards, patch bays, preamps, speaker systems, mixer, amplifier, equalizer, limiter, crossover, digital decoders, stage lighting and other devices with 3 pin XLR connectors..
  • The cable exits from the side of the XLR plug and will not block other jacks, making it more tidy. The custom caps are injection molded from high-quality aluminum material, and the shells are custom precision casting with matte metal finish and gold contact pins..
  • Plug A: Original Aluminum 3 Pin Male XLR.
  • Plug B: Original Aluminum 3 Pin Female XLR..
  • Cable Length: 12 inches/ 30cm Sommer SOD-14 audio cable. We can customize cables with other length, if you need custom cables, please send a message to us before placing the order..
  • Every cable was tested to ensure that there are no short circuit, no potential breakdown problems before shipping. Please contact us if the cable you received is defective or doesn't work. We will solve the problems properly or send you a new replacement at once..
Check Stock

3 Pieces ESP WROOM 32 ESP32 Development Board 2.4GHz WiFi Dual Cores Microcontroller Integrated with Antenna RF Low Noise Amplifiers Filters

  • Package contains: you will get 3 pieces of ESP-32 2.4GHz dual-mode WiFi development boards, enough for your daily use and replacement.
  • Multiple functions: ESP32 development board integrates antenna switches, RF balun, power amplifiers, low noise amplifiers, filters and power management modules.
  • And the entire solution occupies the smallest printed circuit board area.
  • ESP-32 development board is safe, reliable and scalable to various applications, bringing you a lot of convenience.
  • Small size: ESP-32 dual-mode module is compact and easy to embed into your device, convenient to use.
  • Low power consumption: the development board uses 2.4GHz dual-mode Wi-Fi, chip ESP-WROOM-32, and 40nm low power consumption technology.
Check Stock

Amplifier, Cable TV RF Broadband 8dB Gain Four Output 5-1002Mhz w/ Power Adapter

  • Four port amplifier with a passive return path provides an increase of +7.5 db per port. Reduces snow and prevents image pixelation with digital cable, boosts antenna (OTA) signals for distribution to multiple TVs. May improve cable modem performance. May improve HDTV reception..
  • Compatible With All Standard And Digital Cable TV Services, OTA Antenna Reception. Not compatible on systems with an existing amplifier or pre-amplifier. Exceeds all SCTE Standards. Coaxial cables are not included..
  • 6 kV surge protection for protection against lightning strikes. The nickel plated housing provides the excellent corrosion resistant protection against salt fog and rust. 5 Year Warranty (amplifier only).
  • 3 dB Noise Figure provides clean amplification of weak signals to overcome the poor noise figure in TV tuners and converters. 6 kV Combination Wave Surge Protection Unique surge protection on all ports..
  • PTC Short-Circuit Protected UL Listed Adaptor - Self-resetting circuit protection provides safe protection against short-circuits to minimize outage times..
Check Stock