ElecGear 4X Replacement Joystick (EL2 FU 10K) for PS4 / PS3 Wireless Controller, Analog Stick Controller Sensor Assembly Thumbstick Module for Playstation
[EL2 FU 10K for PS4/PS3 Controller] – 4x replacement analog joystick was found in some PS4 DualShock 4 came with PlayStation 4 Pro, and some PS3 controllers also use this version. The thumbstick module was made by Favor Union (FU). The stick controller comes with 10KΩ trimmer potentiometers in orange.
[Compatibility] – The 14 prongs were positioned as the same as ALPS edition. Technically, the whole unit is interchangeable with EL1 ALPS 10K used in PS4 controllers, and other brands like ‘Scuf’ and ‘Razer Raiju Ultimate’ with ALPS joysticks inside. However, the trim pot resistor alone is not interchangeable with ALPS edition.
[Additional Resistor] – Complicated moving mechanism and daily wear and tear finally caused drifting. Even new sensors cannot be 100% balanced. Calibrating in controller settings might not work. We packed 10x correction resistors to solve the potential problem in hardware level. Solder one or two paralleled tiny resistors onto the potentiometer at the opposite direction against drifting. It will help correct 3 to 5 degrees drifting.
[When to replace] – The analog joystick needs to be replaced when your controller has the problem of drifting, creeping, stuttering, a blind spot, a dead spot, a dead zone, no react....
HEMOBLLO Mobile Phone Game Joystick - Mobile Game Joystick Button Game Controller Touch Screen Joypad Compatible for iPad iPhone Android Mobile Tablet Smart Phone (White)
MOBILE GAME JOYSTICK: The design of mobile game analog joystick can provide you with sensitive shooting and aiming buttons when you are playing mobile shooting games..
LOW FRICTION DESIGN: The ultra-low friction joystick with non-slip design allows you to play in 360 degrees..
MOBILE SHOOTING GAME CONTROLLER: Just set the game pad in the game to enjoy. Supported devices: Regardless of the operating system, this joystick is suitable for most mobile phones..
EASY TO USE: Simple installation, no battery or power supply required. Just paste it on the screen and start playing..
BETTER GAMING EXPERIENCE: A new generation of left shooting button can improve gaming performance and experience..
Onyehn 4pcs Analog 3D Joystick Thumbstick Replacement Parts with Screwdriver Repair Kits fit for Sony Playstation 4 PS4 Controllers
NEEDS MODERATE SOLDERING.PROFESSINAL INSTALLATION IS HIGHLY RECOMMENDED,INSTRUCTION OR TOOL IS NOT INCLUDED..
Tips for disassembly and assembly of screws that are not easily damaged: To unscrew the screws, please place the screwdriver perpendicular to the screw, and then force the screws to rotate. The installation screws need to be tightened softly to the end, and finally tightened vigorously to fix them..
A good replacement for your damaged or non-working 3D Joystick Axis Analog Sensor Module Platform: Sony PlayStation 4 ..
Package includes: (No retail package) 4 X 3D Analog Joystick+4 x Mushroom Caps+4 x fluorescent button caps+4 x 10K ohm Trimmer Potentiometer Sensor(for PS3, PS4, Xbox One series,Nintendo Switch Pro controllers ONLY!).+1 x "+" Cross Screwdriver+1 x Opening Repair Tool+7 x Cross Screws.
Multi-Platform Compatible: PXNX9 Arcade Stick Compatible with PS4/PS3 /Xbox Series X/S/Xbox One/ Switch/ Window PC. It could give those players a real arcade feel and excellent unprecedented gaming experience with this joystick.
MACRO Function: PXN Arcade Stick Support MACRO function, can set a combination button, let you release a key to the skill combination, experience the link attack, and easily defeat your opponent..
High Quality: Strong hardness shell and it is so hard, not easy broken. Accessories use Sanwa Denshi parts, Stick and Buttons. Sanwa is the gold standard for arcade buttons, with super fast response, long life and comfortable touch. And the attractive led light background of buttons..
Retrofittable Design : PXN Pro Arcade Stick Vewlix Style 8 Buttons Arcade Layout, layout ideal for all fighting games. And you can reset the buttons according to your preference, Internal storage includes a screwdriver, detachable USB cable, and two spare three-and-buttons..
One Button to Shift Stick : One key toggle among D-pad/Left Analog Stick/ Right Analog Stick, Joystick can be Interchanged freely. X9 suitable for most fighting games, such as Tekken, Street Fighter, The King of Fighters, SF5, Soul Calibur, Dragon Ball Fighter, Live Action Combat, Pac-....
Collard Greens and Catfishing: A Funny Culinary Cozy Mystery (Seasoned Southern Sleuths Cozy Mystery Book 2)
This silicone thumb stick cap is specially designed for Nintendo Switch Joycon & Switch Lite & Switch OLED Joycon, which can provide effective protection for your analog sticks.
Multiple combinations color for choice, fresh and lovely. You can combine eXtremeRate shell to customize your Switch or Switch Lite.
The thumb grip cap is made of high-quality silicone, soft and comfortable. It can well protect your joystick from scratches, bumps, dirty or other damage.
Easy to install, it only takes a few seconds to install the thumb grip caps on the console joystick. Fit in perfectly, compact with the joystick after install, you won’t be worry it fall off.
【Note】This joystick cover is not suitable for PS4, Switch Pro, Xbox One controller. If you find any problems (damage, scratches, dirt, etc.), please feel free to contact us. Our shop always strives for customer satisfaction and always does our best to meet customer needs with better quality.
[New Edition] 2PCs Replacement Analog Sensor Joystick for Nintendo Joy-con Controller and Switch Lite, Left and Right 3D Thumb Stick Rocker with Cap, Teardown Repair Tool Kit (2X White)
[Why choose ours] Upgraded version, authentic and OEM made replacement analog joystick for Nintendo Switch Joy-con games controller and Switch Lite. Same touch as NS original ones with accurate movement and crispy click on action. All the necessary repair tools are included. Three different color options for your left and right controllers.
[When to replace] The 3D sensor module needs to be replaced when your Joycon wireless controller has the problem of stick drifting, creeping, shuttering, a blind sport, a dead spot, a dead zone, no reaction when click or wouldn't center after years of wear and tear.
[How to do] Replacing Joycon thumb sticks is relatively easy. Dismantle the pads with included tri-wing, cross screwdriver and spudger pry tool. Swap the new stick assembly for the problem ones. Carefully insert the flexible cable in with included tweezer. Calibrate the new analog sensor in Nintendo Switch settings.
[Whats in Package] 2*Analog Sensor Joystick (White/White).
37 Pcs Analog Joysticks Repair Kit Compatible with Xbox One Controllers, Include LB RB Bumper Buttons Analog Joysticks Replacement Thumbstick Hat Silicone Hat Covers with Screwdriver Repair Parts
Ideal Alternative: analog joysticks are a good replacement for broken or non functioning gaming joysticks, which can handle most issues like stick drift, creeping, stuttering, blind spots, dead zones, no click, mis centering, broken and loose, etc., giving you a good experience.
Complete Set: you will get 8 LB RB buttons, 8 joysticks, 8 joystick thumbsticks covers, 8 joystick thumb grip protect covers, a T10 security torx screwdriver, a T8 security torx screwdriver, a T6 torx screwdriver and 2 prying tools.
These analog joysticks are compatible with Xbox controller.
Repair Kit: when your RB or LB button doesn't work, works intermittently, or needs to be pressed hard, use this set of controller replacement parts to fix it, extending the life of your console.
Replacement Thumbsticks Cover: the texture design of thumbsticks cover can protect your finger slip from the controller, providing higher accuracy and sensitivity.
It is compatible with most Xbox controllers and PS4.
Soft and Sturdy: joystick thumb grip protect covers are made of quality silicone material, comfortable to touch and not easy to break, can compatible with PS3, PS4, Xbox 360, Xbox one game controllers.
2 Pairs of white covers can light up in the dark, but the other 2 pairs of black c....
Tire Stickers Nitto Tire Lettering - DIY Permanent Glue On Rubber Decals for Tires with Glue & 2oz Bottle Touch-Up Cleaner / 19-21 Inch Wheels / 0.75 Inches/White / 8 Pack
♥BRHE thumb stick caps compatible with Nintendo Switch and NS Lite..
♥Are you looking for a simple and cheap way to fix your Switch joystick cover? If your 3D joystick function is still working, just the surface cover is worn or dirty，or if you want to change your Switch joystick to a different color, purchase the BRHE covers to replace your original broken, worn-out or damaged 3D analog cover..
♥Our stick cover is to replace your original cover on the joystick, and it will not change the original height of the joystick. Enjoy your own DIY in a variety of colors..
♥Brand new and high-quality replacement parts. Very easy to install and detach. Simple operation that takes only 1 min to complete..
♥BRHE – If you have any questions, please feel freely to contact us. At BRHE, we believe that we are a better brand when all our customers are satisfied..
