Best Analog Modules

53' Portable Modular Sluice Box with Stream Flare (Green)

  • SLUICE FOX 53" Modular sluice box system is expandable and contractible to match each prospecting environment. An essential mining kit component for the serious Gold Rush enthusiast! Ideal for searching, finding, and collecting GOLD..
  • PORTABLE: Breaks down into three pieces for an easier pack into steep and narrow creek beds. Each Sluice box Unit Measures Approx 24" x 7.5" x 2.5".
  • DURABLE: Made from recycled plastic bottles, the impact resistant polypropylene construction is built for wear and tear. Patented interlocking modules are even stronger when assembled than they are on their own..
  • LIGHTWEIGHT: At less than 4 pounds, Sluice Fox makes the most portable sluice boxes in the world..
  • VERSATILE: These sluice box modules may be used individually, fitted together side-by-side when needed to fit a wider stream to catch your nugget placer gold, or used together end-to-end for a whopping 53" long stream sluice with flare. Alternating V-trap riffles and miners moss pockets are designed to catch both flake and flour gold fines. When you're all done, clip the two sluice modules together top-to-top ridge and place in a plastic bag so you can take your score home without losses..
Check Stock

Active Aqua GFOE3 2.0 6 Square Pots 5-Gallon 13-Liter Bucket Hydroponic Expansion Kit System with Fittings, Connectors, & Tubing Grow Flow, Black

  • EXPANSION KIT: Grow flow expansion kit designed to improve your existing grow set-up and deliver nutrients to your plants.
  • 6 GROWING MODULES: Includes 6 growing modules each consisting of a square 5-gallon pot.
  • Each bucket holds approximately 13 liters of clay pebbles or similar medium.
  • You can connect up to 48 on one control unit, depending on the reservoir size.
  • POT FEATURES: Each pot features a centered drain fitting that minimizes standing water.
  • Unique aeration channels help improve root health.
  • INCLUDES: Includes (6) square growing modules, each consisting of (6) outer buckets, (6) inner buckets, (6) 3/4-inch barbed tee connectors, (3) 3/4-inch barbed elbows, (6) screen fittings, (12) rubber washers, and (1) 25-foot roll of 3/4-inch tubing.
  • Package Dimensions (L x W x H): 13 x 13 x 32.7 inches.
Check Stock

Makeblock mBot Starter Kit with Bluetooth Dongle Learning & Education Toys with Arduino/Scratch Coding Electronic Sensors Building Robots for Kids Ages 8+ Computer Science Robot kit for Classroom

  • 【Learning & Education Robots For Kids】The Makeblock mBot robot kit was designed for beginners to learn coding in a simple and fun way. Bluetooth....
  • 【Multi-modules Car Kit with Remote Control】The mbot robotics kit contains various electronic modules including Bluetooth modules, ultrasonic....
  • 【Coding Software Platform for Beginners 】The drag-and-drop software provides an intuitive way for kids to learn coding. With the mBlock Blockly....
  • 【Infinite Creative Robot with Add-on Packs】The mBot STEM robot kit has an open-source system that ensures rich and engaging add-on pack play and....
  • 【A Perfect Gift of Wireless Programming Robot for Kids at Home and School】Being well packaged, mBot is made of high-strength 6061 Aluminum alloy....
Check Stock

Behringer 921A OSCILLATOR DRIVER Legendary Analog Oscillator Driver Module for Eurorack

  • Controls up to 12 parallel 921B OSCILLATOR modules.
  • Authentic reproduction of the circuitry from the “Modular 55 & 35” Series.
  • Artist roster includes world’s most famous pop, rock and jazz musicians.
  • 2 summed CV inputs for frequency control and 2 summed CV inputs for PWM.
  • High current outputs for frequency and pulse width to drive multiple 921B modules.
Check Stock

NOYITO CD74HC4067 CMOS 16-Channel Digital Analog Multiplexer Breakout Module

  • Function: Use 16 ADCs to collect 16 analog signals.003cbr003e.
  • Use the CD74HC4067 16-channel analog signal switch.
  • Analog signal input: C0-C15 16 channels.003cbr003e.
  • This is a breakout board for the very handy 16-Channel Analog / Digital Multiplexer / Demultiplexer CD74HC4067.003cbr003e.
  • This chip is like a rotary switch - it internally routes the common pin (COM in the schematic, SIG on the board) to one of 16 channel pins (CHANxx). It works with both digital and analog signals (the voltage can't be higher than VCC), and the connections function in either direction.003cbr003e.
Check Stock

HiLetgo CD74HC4067 CMOS 16 Channel 16 CH Digital Analog Multiplexer Breakout Module for Arduino

  • Function: Use 16 ADCs to collect 16 analog signals..
  • Use the CD74HC4067 16-channel analog signal switch.
  • Analog signal input: C0-C15 16 channels..
  • This is a breakout board for the very handy 16-Channel Analog/Digital Multiplexer/Demultiplexer CD74HC4067..
  • This chip is like a rotary switch - it internally routes the common pin (COM in the schematic, SIG on the board) to one of 16 channel pins (CHANxx). It works with both digital and analog signals (the voltage can't be higher than VCC), and the connections function in either direction..
Check Stock

Mushkin Enhanced Redline 32GB (2 x 16GB) DDR5 5200 (PC5 41600) Desktop Memory

  • 32GB DDR4 Dual Channel kit - two matched 16GB modules.
  • 288-pin memory modules, backed by Mushkin's lifetime warranty.
  • CAS latency of CL17 (17-17-17-38) at 1.25V.
  • Equipped with stylish red Frostbyte heatsinks for improved heat dissipation.
Check Stock

Arturia MatrixBrute Analog Synthesizer

  • 49 note keyboard with both velocity and aftertouch 100% analog signal path with analog effects Multiple keyboard modes for mono, paraphonic and duo-split modes Unique matrix--create your own routings Built-in arpeggio and sequencer.
  • MatrixBrute is perhaps the most powerful analog monophonic synthesizer ever.
  • As flexible as a modular system but offering presets, MatrixBrute is a dream machine for everyone interested in creating a sound palette of their own.
  • MatrixBrute is an outstanding analog synthesizer.
  • Offering three Brute oscillators, a Steiner-Parker filter and a ladder filter, five analog effects, and the incredible modulation matrix.
Check Stock

ENET Cable for BMW E-SYS, Ethernet to OBD Interface Cable, OBD II to RJ45 for BMW Coding F-Series 1 Series 3 Series 5 Series GT X3 & G-Series, 16 Pin Car Diagnostics Scanner Connector Cable Tool

  • Ethernet to OBD Cable Vehicle Application – 5 ft. Ethernet to OBD cable supported for BMW models include: BMW F-series, the new 1 Series, 3 Series, 5 Series, 7 Series, GT, X3 and the latest BMW G-Series..
  • Choose to Program Single Module or Hide Multiple Modules – Modules are the separate computer programs that run various aspects of your vehicle, from the physical function to the accessories and tools of your vehicle. With this cable and a diagnostic tool, you can choose to program a single module or hide multiple modules. This all works through the ENET data line and the ICOM coding..
  • Software Compatibility – OBD Interface cable works with many different software options, such as ECOM, ICOM, INPA, ISIS, and ISTA, it will work with any of them, giving you full access to your vehicle’s modules..
  • High Quality ESYS Data Cable – ENET Ethernet to OBD interface ICOM coding cable made of premium material, this car usb cable obd2 diagnostic scanner is sturdy, not easy to aging and abrasion resistant, to ensure maximum strength and durability for long lasting usage.
  • What You Will Get – We offer icom coding f-series for bmw enet 24 month service, any questions about OBDII cable converter adaptor, pls contact us by Email, the software will be sent to yo....
Check Stock

DTOL 10pcs 5V 650nm 5mW Red Dot Laser Head Red Laser Diode Laser Tube with Leads Head Outer Diameter 6mm

  • Economical Red Dot Laser - Low cost solution for consumer grade positioning, measuring, pointing and laser sighting device. Please notice: laser modules are not stand alone item. They are not supposed to be sold with any power source, power supply, or wiring terminals. Because modules are simply components, and it means that you have to wire it to your own power source by yourself..
  • Wave length: 650nm. Output power: Class IIIa – less than 5mW. 2.6~5 VDC operation. Beam Divergence (Half Angle) : 0.6 mRad. Beam shape: oval, not perfect circular. Dimensions: D7 x 21 mm..
  • Red laser. Ideal Laser module if cost is a very important consideration. Notice: This item is not a laser pen. Laser modules are not supposed to be used for commercial use like normal laser pointers..
  • This module has an integrated optic, laser diode, and APC driver circuit. APC driver circuit enables constant Laser output power..
  • Aspherical plastic lens provides Dot spot. The operation voltage is 2.6~5 VDC. Please make sure that you connect this module to the appropriate voltage (2.6~5 VDC)..
Check Stock