Best Analog Sensor

KEYESTUDIO MEGA Sensor Shield V1 for Arduino MEGA R3 2560 Prototype Board Projects

  • Nice Sensor shield of MEGA Rev3, Easy prototyping and Very convenient especially for 3PIN (G V S) connections. There are tons of ground and VCC headers making really it easy to connect various Arduino modules and sensors with DuPont style cables..
  • This sensor shield board really simplify the circuit and easily connect commonly used sensors.The board is having digital and analog interface, Bluetooth module communication interface, SD Card module communication interface, APC 220 radio frequency module interface, etc..
  • This sensor shield allows ease development and prototyping and makes convenient way to connect many external devices/sensors..
  • This board works well for prototyping or certain permanent applications and a very handy companion to an Mega Rev3 or compatible board..
  • 100% Compatible with the programming software for Arduino. Excellent shield board in good quality and packaged in a nice box! Great for all kinds of scientific experiment research for Arduino.
Check Stock

DollaTek MAX30100 Heart-Rate Oximeter Pulse Sensor Pulsesensor Module for Arduino

  • Heart Rate Click carries Maxim's built-in MAX30100 pulse oximetry and heart rate sensor..
  • It is an optical sensor that derives its readings emitting two wavelengths of light from two LEDs..
  • A red and an infrared one - thus measuring the absorbance of pulsing blood through a photoelectric cell..
  • This particular combination of LED colors is optimized for reading data through the tip of a finger..
  • The signal is processed by a low-noise analog signal processing unit and communicated to the target MCU through the mikroBUS I2C interface..
Check Stock

CQRobot Ocean: TDS (Total Dissolved Solids) Meter Sensor Compatible with Raspberry Pi/Arduino Board. for Liquid Quality Analysis Teaching, Scientific Research, Laboratory, Online Analysis, etc.

  • Wide Voltage Input: 3.3V to 5.5V. Good Compatibility Output: 0 to 2.3V analog signal output, compatible with 5V or 3.3V controller..
  • AC Excitation Source: effectively prevent probe from polarization, Waterproof Probe..
  • Easy to Use: Arduino compatible, simple connection, plug and play without soldering..
  • Used with ADS1115 16-Bit ADC Module (ASIN: B08KFZ3PVT, Model: CQRADS1115), Compatible with Raspberry Pi Motherboard..
  • Note: When using the TDS instrument sensor, the sensor probe is immersed in liquid, and the purchaser needs to Separate the sensor Probe Protective Cover to avoid incorrect data reading and malfunction..
Check Stock

Getting Started with the micro:bit: Coding and Making with the BBC's Open Development Board (Make)

  • Specially designed for Microbit board. This kit includes a keyestudio sensor shield fully compatible with micro bit and other commonly used 37 kinds of sensor modules. It's compatible with both microbit v1.5 and v2, microbit board not include!.
  • Designed to learn electronics programming. Great hands on STEM kit to get started with the micro bit. The product needs to be debugged before use, such as an LED display module. Please use an external power supply and debug the backlight brightness..
  • The kit gives 37 kinds of common sensors, such as Digital LED Module, Analog Temperature Sensor, Photocell Sensor, Ultrasonic Module etc, allow you make a lot of interesting projects like Traffic Light, Magnetic Check, Temperature Test, Joystick Test, Photo-interrupter Test, Alcohol Detection and so on..
  • We have detailed tutorial( included introduction, wiring diagram, test code, driver installation, Example Projects...... Step by step to explain how to use on our wiki page..
  • Solder is very clean, everything is aligned nicely, all boards are well packed after function, voltage, current testing, protected in a beautiful box. Up to FCC and CE Standard: made from environmentally friendly components and materials..
Check Stock

Eversecu 5.0MP HD CMOS Sensor AHD/TVI/CVI/960H Bullet Analog Camera, 5MP Full HD Weatherproof CCTV Security Camera for Outdoor Surveillance,3.6 mm Lens, Metal, White

  • Please note this camera only workes with 5MP AHD/CVI/TVI DVR or Analog DVRs. If your DVR doesn't support 5MP Analog Cameras, please don't buy this camera. Power supply, coaxial video cable, and DVR are NOT INCLUDED but REQUIRED. If you need a 5mp DVR, please search ASIN: B07DQ7T573.
  • 003cb003e CRYSTAL CLEAR IMAGE:003c/b003e 1/2.7-inch 5MP HD CMOS sensor for crisp image. D-WDR, 3DNR and OSD adjustments for optimal picture quality in any lighting condition..
  • 003cb003e ENHANCED NIGHT VISION: 003c/b003e Latest anti-reflection black film technology and upgraded SMT Led with 65-100 feet IR Range for superior image at night..
  • 003cb003e GREAT LOW LIGHT IMAGE:003c/b003e HD CMOS Image sensor with NIR and LOW ILLUMINATION technology applied, it performs great image with little ambient light..
  • 003cb003e 4 MODES VIDEO OUTPUT: 003c/b003e 5MP HD-TVI, 5MP HDCVI, 5.0MP AHD and 960H CVBS. If you need a power adapter, please search ASIN: B0792261BP, If you need a 5mp Supported DVR, please search ASIN: B07DQ7T573.
Check Stock

GAOHOU PH0-14 Value Detect Sensor Module + PH Electrode Probe BNC For Arduino

  • Getting the voltage varies on what you’re using. The PH for this sensor is not at 0v for a PH7 it’s around 2.51v from the multi-meter and PH4 at 3.03. If you calculate the step, 2.51-3.03 =-0.52. The difference between ph4.01 and PH7 is 2.99..
  • If you’re using a Particle product like the Photon or Argon, be aware of a bug. It’s a hardware issue with the analog ports fluctuating a ghost voltage. This fluctuation is enough at these low voltages reading to make your ph sway by .7 or more. To fix this, you’ll need to add a 0.1uF cap between the analog port your using and ground..
  • This PH electrode probe must be calibrated with standard buffer solution before each use, and the electrode probe cannot be tested continuously for a long time, which will shorten its life. There are two trimmers on the circuit board. One of them is for offset adjustment (closest to BNC connector) accomplished by removing the Ph probe and shorting the BNC connector with a wire. The other trimmer is an upper limit threshold for the digital output pin..
Check Stock

Amcrest Night Color Turret Analog Camera w/ 131ft Full Color Nightvision, Security Camera Outdoor for CCTV DVR, Built-in Microphone, 112° FOV, 5MP@25fps AT5N28-W

  • 5-Megapixel Quality - The 5-Megapixel Analog Security Camera is a high resolution 2592 x 1944 (2688 TVL) camera that provides excellent video quality and clarity, 4MP @30fps. Features Quadbrid 4-in1 HD-CVI/TVI/AHD/Analog dip switch. Connect your camera to the Amcrest HD-CVI/TVI/AHD/Analog Security DVR Systems to view and record. Not recommended for third-party DVR's.
  • Smarter Security – Receive motion alert notifications and review footage via your smartphone with the Amcrest View app when connected to an Analog Security System. Playback and record professionally on a PC using the Amcrest Surveillance Pro software for Windows and MAC (included) or Blue Iris Professional..
  • NightColor – Features an enhanced low-light image sensor and chipset that allows for full night vision, in color up to 131 feet, this outdoor Turret Analog Security Camera features a heavy-duty metal weatherproof IP67 housing, built-in microphone for one-way audio. Dual H.265/H.264 compression allows for maximum encryption with the latest technology as well as backward compatibility with legacy platforms..
  • Long Distance Transmit Range - Transmit video and audio over a single coaxial cable, long distance transmit range up to 2296ft. This camera is compatible with the following BNC Ca....
Check Stock

AEM 30-3511 Infinity 6/8h Plug in Play Jumper Harness for 2003-2005 Mitsubishi Lancer Evolution / EVO 8 VIII

  • AEM’s Plug & Play harness for Mitsubishi Evo engines includes a Wideband O2 connector, AEMnet connector for communication with other AEMnet enabled devices and an auxiliary connector with a Deutsch DTM 12P connector for adding common aftermarket sensors including fuel pressure, air inlet temperature, MAP, oil temperature and ethanol content sensor..
  • The expansion port also includes a sensor ground, 5v reference, 12v power from relay and high side output for activating a relay or solenoid, a low side output for boost control and analog inputs for mode switch and no-lift shift..
Check Stock

Ultrasonic Sensor for Robots People Detection Proximity Zone Detection and more | MB1003-000 HRLV-MaxSonar-EZ0 | Ranges from 30cm - 5000mm | MaxBotix Inc.

  • Firmware filtering for better noise tolerance and clutter rejection..
  • HRLV?MaxSonar?EZ0 has the widest and most sensitive beam pattern from HRLV?MaxSonar?EZ sensor line..
  • Maximum range of 5000 mm (195 inches).Resolution of 1 mm..
  • Operates from 2.5V-5.5V. Low 3.1mA average current requirement..
  • Read from all sensor outputs: Analog Voltage, RS232 or TTL Serial, and Pulse Width..
Check Stock

YIXIND 482 in 1 Game Card,Super Combo Game Cartridge,Game Card Containing 482 Classic Nostalgic Games, Game Pack Card Super Combo,Suitable for Most DS / 2DS / 3DS Console of Game Consoles

  • Motion Sensor & Gyro Sensor. Two screens. Analog Control..
  • For ages 6 and up. Backwards Compatibility. StreetPass. Spotpass..
  • Adjustable Stylus. Charging Cradle. 2GB SD Memory Card Included..
Check Stock