30 Pcs 3-Pin Extension Cable Cord Male to Female Lead Wire Connectors for Servo Extension Connection Control Board Remote Control Parts - 5 Sizes
5 Sizes: 5 different lengths of 10 cm/ 3.94 inch, 15 cm/ 5.9 inch, 30 cm/ 11.8 inch, 50 cm/ 19.7 inch and 60 cm/ 23.6 inch, each length has 6 pieces....
Widely Application: These servo extension lead cables are compatible with Futaba and JR servo, plane and helicopter servo connection or receiver....
3-Pin Wire Connector Design: These servo extension cable connectors with 3 pins and have an angle in case you will install incorrectly, convenient to....
Female to male servo extension cable: featured with female connector on one side and male connector on the other side, can be connected to the....
Item Quantity: Package come with 30 pieces of female to male servo extension cable wires, enough for you to use on different occasions.
AGFRC 36KG IP67 Waterproof Steering Servo High Torque Programmable Full Metal Gear Digital Brushless Servo with 25T Metal Servo Horn for 1/10 RC Models, Control Angle 180° (A80BHSW V2)
Programmable & High Torque - AGFRC A80BHSW high torque servo is programmable by the AGF-SPV2/3 servo programmer to change the torque, speed, angle, inversion, etc. The maximum torque of this steering servo for RC car is up to 36 kg/cm (500 oz/in) @8.4V and speed up to 0.071sec/60°@8.4V..
IP67 Waterproof Design - AGFRC RC steering servo motor uses high-precision production technology to improve product tightness. With IP67 waterproof design, when you cross the mountains and pass the charming stream, fully magnetic waterproof IP67 grade can let your model play with the river..
High Quality & Performance - Standard waterproof high torque servo equipped with full patent reinforced steel gear, full metal case, three ball bearings, and magnetic angular position Sensor which is low power consumption and can instantaneous angle sensing..
High Precision & Application - Advanced linearity and accuracy, stable, low noise, waterproof, dust-proof. This brushless full metal gear servo is with a standard size, dimension: 40*20*37.5mm, ideal for 1/10 buggy, monster truck, RC car, crawler, climbing car, boat, airplane, helicopter, robot, etc..
Satisfied Customer Service - Please read the detail description of this brushless high speed HV servo motor first, if any ideas ....
FEETECH 35KG Servo Motor 7.4V High Voltage Waterproof High Torque RC Servo Full Metal Gear Digital Servo, Aluminium Case, Control Angle 180° for 1/8 1/10 RC Cars, TRAXXS x4, Baja, RC4WD, GTR and More
HIGH QUALITY SERVO: FT5330M servo motor is composed of a sturdy PA aluminum middle shell, a strong steel metal gear, and a hard iron shaft, provide higher stability and provide longer service life..
GREAT COMPATIBLE MOTOR: The servo motor system is controlled by pulse, compatible with 1/8 and 1/10 scale RC robots, trucks, off-road vehicles, robotic arms, and any application that uses a standard servo system..
SERVO PROTECTION MECHANISM: The steering gear has IP54 waterproof performance and ball bearings.The output torque exceeds the overload torque, lasts 8S, or the temperature over 70 ℃, the steering gear will automatically stop the output torque. The overload torque can be modified..
HIGH ROTATION SPEED SERVO: A high-torque servo, the rotation angle is 180 degrees (at 500→2500μsec), when the power is stopped, it can rotate 360 degrees. Dead width ≤ 4 μsec. Durable and reliable..
STRONG STALL TORGUE MOTOR: The operating voltage range is 4V-8.4V, the stall torgue is (6V) 400.65oz/in(28.8kg/cm), (7.4V) 493.86oz/in(35.5kg/cm). The servo size is 55X20x43mm..
6 Channel Digital Servo Tester with Over-Current Protection
Use high-precision six potentiometers, which can control the corresponding six servos simultaneously.
The 0th, 1st, 2nd and 3rd interface have over-current protection to avoid burning out servo due to over-current.
The voltage that the controller require should correspond to the voltage required by a servo that you controlled.
There is a small button under each knob of controller, press it, the servo will return to the center of the state, the knob can not control the servo rotation.
then press it, remove the center of the state, the knob can continue to control the servo rotation.
AGFRC 55KG Digital-Steering-Servo High-Torque Programmable - Full Metal Gear Brushless Servo for 1/8 1/10 RC Models, Control Angle 180° (A86BHM)
【UPGRADED & PROGAMMABLE】This upgrade high torque servo is programmable by the AGF-SPV2/V3 servo programmer (not Include) to change the torque, speed, angle, etc..
【HIGH PRECISION & MONSTER TORQUE】Stable, low noise, dust-proof, advanced linearity and accuracy. The maximum torque of this steering servo is up to 55kg/cm (764oz-in) @8.4V and speed up to 0.110sec/60°@8.4V. Size: 40*20*41.5mm(1.57*0.79*1.63in).
【HIGH QUALITY & PERFORMANCE】Standard 55KG high torque servo equipped with patent reinforced steel gear with PINS, three ball bearing, full Aluminium housing with groove surface for fast heat dissipation, accuracy with precision potentiometer..
【APPLICATION & 180 DEGREE ROTATION】AGFRC RC steering digital servo motor uses high-precision production technology to reduce production deviation and improve product tightness, ideal for 1/8 1/10 Buggy /Monster Trucks/RC car/boat/plane/helicopter/robot..
【SATISFIED CUSTOMER SERVICE】Please read the detail description of this RC car brushless servo motor first, if any ideas about our high torque digital servo, contact us first & We will provide you a better solution, and make you satisfied..
15 Pieces Servo Extension Cables Servo Extension Male to Female RC Servo Extension Cord Wire Cable Compatible with RC JR Futaba RC Car Airplanes (3.9 Inch,5.9 Inch,11.8 Inch,19.7 Inch,23.6 Inch)
Wide application: these servo extension s are compatible with Futaba and JR servo, plane and helicopter servo connection or receiver connection, also nice for remote control car, RC car and more.
Appropriate sizes: the servo extension cord measures approx. 3.9 Inch, 5.9 Inch, 11.8 Inch, 19.7 Inch, 23.6 Inch in length, different size for your use, the color is black and red.
Package includes: this package includes 15 pieces of male to female servo extension cables, enough quantity for you to use and replacement, providing more convenience for you.
Feature: this male to female servo extension cord featured with female connector on one side, and male connector on the other side, can be connected to the receiving set and steering engine.
Useful function: the servo extension wire is suitable for jumping from board to board, or can be applied to control panel cable remote control, which is male to female.
【CHANGE DIRECTION OF ROTATION】Servo Reverser can change the direction of rotation of the servo. Just install them in series in the servo channel..
【COMPACT SIZE】Compact size and light weight without putting extra burden on your drone and suitable for carrying anywhere. Perfect workmanship, easy to install and disassemble, the ideal upgrade accessory for your drone..
【OPERATING VOLTAGE】5.0-6.0V (directly connected to the receiver), Current: 2A, Length: approx 6 cm / 2.36 inch..
【STABLE PERFORMANCE】The RC servo signal reverser is made of PCB material, which is durable and solide to use for a long service life. High-precision PCB ensures stable performance and excellent functions, suitable for your RC done..
【WIDELY USED】The Rotation Inverters widely used in JR Futaba Aircraft, RC Aircraft Steering Gear. Package includes 1x Servo Signal Reverser with JR male and female type plug..
Favordrory 30 Pieces 3-Pin Extension Cable Cord Male to Female Lead Wire Connectors for Servo Extension Connection Control Board Remote Control Parts, 5 Sizes
Size: 5 different lengths of 10 cm/ 3.95 inch, 15 cm/ 5.9 inch, 30 cm/ 11.8 inch, 50 cm/ 19.7 inch and 60 cm/ 23.6 inch, each length has 6 pieces servo extension cords.
Quantity: this package includes 30 pieces of female to male servo extension cable, enough for you to use, different length can meet your different needs.
Good connector: the connector of these wires are Futaba style connector with 3 pins, and it has an angle, in case you will install incorrectly, very convenient.
Feature: Female to male servo extension cable: featured with female connector on one side and male connector on the other side, can be connected to the receiving set and steering engine.
Widely Application: these servo extension leads can be applied for Futaba and JR servo, plane and helicopter servo connection or receiver connection, remote control car, RC Car.
BETU 35KG Coreless High Torque RC Servo，Waterproof Servo with Full Metal Gear, Steering Servo with 25T Servo Horn（270°）
【Excellent Quality steering servo】Equipped with strong copper & stainless steel Gear, CNC aluminium middle shell, Less noise, light weight, Stable and water-proof..
Widely Use Rc Servo】The servo (Control Angle 270°) Compatible with 1/6，1/8, 1/10, 1/12 Scale Clawer Truck, Traxxas, scx10, RC Car / Robot / Boat and other remote control models..
【Waterproof Servo】Waterproof performance: IP66. Controllable angle range from 0 to 270 degrees, Excellent linearity, Precision control..
【35KG Servo Standard Size】40 x 20 x 38.5 mm ( 1.58 x 0.79 x 1.50 in).
