Best Anchor Hole

fischer DUOPOWER (#10) 5/16\ x 1 5/8\ Universal Wall Anchor with Screws (50 Pcs)

  • Combination of two material components for more performance..
  • Secure functions for solid (expansion) and hollow and panel building materials (folding/knotting)..
  • Easy installation: narrow edge of the plug prevents it from falling deeper into the drill hole..
  • Best possible feedback from the anchor - you can feel that the anchor is sitting perfectly..
  • Comes with 50 anchors and screws included..
Check Stock

VEVOR Standoff Post Base 4 x 6\(Inner Size:3.74 x 5.12\) 10 PCS Stainless Steel Adjustable Post Base Adjustable Post Anchor with Fiber Drawing Surface and Full Set of Accessories for Rough Size Lumber

  • [Anchor Your Cemented Posts]: The BISupply U-Shaped 4x4 Post Anchor Concrete Brackets 4 Pack fits standard 4 x 4-inch (10.2 x 10.2 cm) square posts.
  • (2) 3.75-inch (9.5 cm) long closed sides with predrilled screw holes and (2) 3.4-inch (8.6 cm) long open sides.
  • [Anywhere Posts are Needed]: Use as deck footing anchor, patio post holder, pergola anchor, or gazebo stabilizer for posts up to 4 feet (1.2 m) high.
  • Anchor post spike holder stands 3 inches (7.6 cm) above surface while spike end pokes 7 inches (17.8 cm) into concrete to give you 10 inches (25.4 cm) total.
  • [Install Easily]: Set the rebar spike in wet concrete before it cures and let dry for a permanent post mount.
  • Insert your wood post and install screws (not included) through the 10 predrilled holes (5 on either side) that sit approximately 2 inches (5.1 cm) apart.
  • [Built to Last]: Post hole spike anchor constructed of durable steel with a black powder coat finish for maximum longevity.
  • 0.6-inch (1.6 cm) diameter rebar spike adds strength and stability.
  • [Package Contents]: Wood post anchors package includes 4 individual post holder deck brackets.
  • Wooden posts and installation screws not included.
Check Stock

2 Pcs 10mm Screw Pin Anchor Shackle 3/8 Inch 304 Stainless Steel Shackle for Rigging, Chains Wirerope Lifting.

  • 1/2 Inch Anchor Shackle: Made of 304 stainless steel, one-way screw, bolt design, higher hardness, moisture-resistant, acid and alkali resistant, anti-rust, Connect loose ends of cables, chains, tow straps and snatch blocks..
  • Anchor Shackle Size: 2 Pcs 3/8"(10mm) Bow Shape Screw Pin Anchor Shackle, one-way screw, bolt design, Max Open Width: 22mm, Working Load Limit: 2000lbs, Breaking Load: 8000lbs..
  • Easy to Use: Make sure that the pin is properly screwed into the bow shackle hole, tighten it by hand, it with a wrench or other suitable tool, The best use of connection accessories, is perfect for use with ropes..
  • Wide Application: Screw pin anchor shackles, used for sailing hardware, towing, hiking and other outdoor sports, Great for boats, jeeps and other applications for tie downs, towing, could be also used in loading and unloading of goods..
  • Hardware Parts: These shackles hooks for anchoring, binding, rigging all types of hardware, always used together with a expansion hook and stainless steel chain, apply to a variety of boat or household applications..
Check Stock

Tie Down Strap Rings Tie-Down Anchors Hooks Stainless Steel Lashing Rings with Red Powder Coating for Tiedown Attachment Points for Dirt Bike, Motorcycle, Trailer, Pickup, Truck,Camper,RV (Pack of 10)

  • ...iders who mess up their throttle or clutch cables because they accidentally got the metal tie down hook on top of the cable instead of the handlebars..
  • ✅【Good Items】- Now there is a better way. By installing Tie Down Strap Ring on the fork clamp you get a very secure anchor point to attach the tie down hook. Once installed they are out of the way and add almost no weight to your motorcycle. With dirt bike tie down rings, you just hook one end of the tie downs to this eyelet, and the other end hook to the anchor on your truck bed - make loading and unloading so much easier, especially with only one person!.
  • ✅【Good Addition】- 10 Pack tie down anchors hooks can be easily installed almost anywhere there is a bolt, and support up to a 3/8" or 10mm hardware. You can use them to anchor any tie-downs, like ropes, bungee cords, truck bed cargo nets or straps. Widely used as tie down points for dirt bike, motorcycle, Jeep, trailer, pickup, truck, bed camper, ATV, kayaks, RV..
  • ✅【Durable Material】- These tie down anchor rings are miracle workers! They look small but are very strong. Made of thicker heavy-str....
Check Stock

1 Pcs 12mm Screw Pin Anchor Shackle 1/2 Inch 304 Stainless Steel Shackle for Rigging, Chains Wirerope Lifting.

  • 1/2 Inch Anchor Shackle: Made of 304 stainless steel, one-way screw, bolt design, higher hardness, moisture-resistant, acid and alkali resistant, anti-rust, Connect loose ends of cables, chains, tow straps and snatch blocks..
  • Anchor Shackle Size: 1 Pcs 1/2"(12mm) Bow Shape Screw Pin Anchor Shackle, one-way screw, bolt design, Max Open Width: 1" (25mm), Working Load Limit: 1400kg / 3086lbs, Breaking Load: 5500kg / 12125lbs..
  • Easy to Use: Make sure that the pin is properly screwed into the bow shackle hole, tighten it by hand, it with a wrench or other suitable tool, The best use of connection accessories, is perfect for use with ropes..
  • Wide Application: Screw pin anchor shackles, used for sailing hardware, towing, hiking and other outdoor sports, Great for boats, jeeps and other applications for tie downs, towing, could be also used in loading and unloading of goods..
  • Hardware Parts: These shackles hooks for anchoring, binding, rigging all types of hardware, always used together with a expansion hook and stainless steel chain, apply to a variety of boat or household applications..
Check Stock

Nylon Hammer Drive Pin Nail in Masonry Concrete Anchors Zinc Nail 1/4 x 3 Qty 250

  • 1/4 inch Diameter Nylon Mushroom Head Nail In Masonry Anchors with Zinc Plated Steel Nails.
  • Using a pre-drilled hole, they are installed with hand tools (typically a hammer).
  • Drive the pin into the anchor body, expanding the anchor, to form a tight fit.
  • Rust resistant nylon and zinc plated nail.
  • Designed for light duty masonry applications.
Check Stock

Nylon Hammer Drive Pin Nail in Masonry Concrete Anchors Zinc Nail 1/4 x 1 Qty 100

  • 1/4 inch Diameter Nylon Mushroom Head Nail In Masonry Anchors with Zinc Plated Steel Nails.
  • Using a pre-drilled hole, they are installed with hand tools (typically a hammer).
  • Drive the pin into the anchor body, expanding the anchor, to form a tight fit.
  • Rust resistant nylon and zinc plated nail.
  • Designed for light duty masonry applications.
Check Stock

34 Inch Boat Sand Anchor, 316 Stainless Steel PWC Sand Anchors Ideal for Pontoon, Kayak Jet Ski Keeps Securely Near Sandbar Beach or Shallow Water, Detachable Design with Gift Handbag Packaging (34”)

  • 【No more Drift away】Can you accept a sand anchor won't hold your boat, let it drift away? Designed with 316 stainless steel screw auger and 34 inches length, Itayak boat sand anchor will reach deep into shallow water, beaches or sandbars and tether your boat or pontoon securely, so it will never drift off onto the beach, rocks or other watercraft again. It's great to spend a beautiful sunny day on the beach or sandbar without any worries, gives you a fantastic & Wonderful seaside trip..
  • 【More Sturdy Design】 Our anchors are well built with thick and solid sturdy polished 316 stainless steel, better than 304, which has exceptional corrosion resistance, atmospheric corrosion resistance and high-temperature strength for use in demanding conditions. The removable handle turns the anchor to the sand deep enough to ensure stability and the foam grip heels comfortably when turning. The 3MM thick stainless steel shaft can provide excellent holding power during wind and waves..
  • 【Triple Auger Anchor】 The auger is easier to insert into the sand. When you drill the auger deep into the sand, the hole fills with sand, the water presses down on the sand and creates suction to prevent the sand anchor from being pulled out. The triple spiral provides even mo....
Check Stock

Four (4) 1\\/2 x 2-1\\/4 Zinc Plated Hex Nut Sleeve Anchor Bolts (BCP988)

  • Package includes 4 premium sleeve anchor bolts.
  • Ideal for solid concrete, hollow block, solid brick, hollow brick and stone.
Check Stock

ISPINNER 52pcs Zinc Plated Steel Hollow Wall Drive Anchor Screws Assortment Kit for Drywall 35mm 46mm 59mm

  • ✅【MATERIAL】These hollow wall anchors are made of high quality zinc plated carbon steel, which is rust-resistant and corrosion-resistant. Durable enough for you to hanging items..
  • ✅【SIZE & QUANTITY】Total 3 most used sizes, different sizes can meet your specific needs. Including 1/8SDx35mm(20pcs), 1/8SDx46mm(18pcs), 1/8SLDx59mm(14pcs)..
  • ✅【HOW TO USE】Drill a hole first. Clean the hole and unscrew the screw head until it is 4 to 5mm from the top of anchor. Then insert it into the drywall. Tighten the screw to make the anchor fully expanded. Its expansion during installation can provide strong bearing capacity and safety..
  • ✅【APPLICATIONS】Widely used for hanging curtain rods, lamps, photo frames, coat racks, power switches, etc. You can hang various things on the walls to help you save space..
  • ✅【PACKAGE】52 PCS 3 Sizes total in a sturdy transparent plastic case, Easy to store. Besides, the box can be used for a storage box..
Check Stock