Hedday Multi-Angle Drill Guide Attachment Portable Power Drill Stand Compatible with most 1/4” 3/8 Silver Drill Accessories Multi-Angle Readouts
Fits all 1/4-inch or 3/8-inch drills, perfect for horizontal, straight or angled drilling, drilling on the edge of a board or on round stock.
Guide-bars themselves have springs for a quick return when doing repetitive drilling.
Depth Stop & Large Handle : Adjustable depth stop and spring action control of the head. Drill adapter itself slides up and down on guide-bars,....
Angle positions can go up to 45 degrees, and rubber pads in the base hold the guide in place, to accommodate drilling any round stock up to 3 inches....
Satisfaction guaranteed: 90 Days money back guarantee, so there is no risk for you to try, we value our every customer and we always try our best to....
Weytoll Angle Grinder Chainsaw, 4 Inch Angle Grinder Modified To Electric Chainsaw Drill Attachment, Modification Tool Set Woodworking Chainsaw for 100 type Angle Grinder
【One-piece guide plate】Using cold rolling process, non-welding, alloy material, one-piece forging, not easy to break, and long service life..
【Alloy chain】 high temperature quenching treatment, not easy to break, higher hardness, more wear-resistant, smooth harvesting..
【Chain tension adjustment knob】The knob is designed to be enlarged, and the screw can be automatically adjusted by loosening the screw slightly before adjustment, and it should not be too tight..
【Easy to Modify】The angle grinder drill attachment is an easy-to-operate tool that allows users to replace the angle grinder with a chainsaw. This allows the user to easily switch between the angle grinder and the chainsaw. With this retrofit kit, you don't need to buy a new chainsaw, just spend a little time retrofitting, saving you money and time..
【Easy to use】One angle grinder has been developed for two purposes, and the idle angle grinder can also be rejuvenated..
Impact Grade Driver Sockets Adapter Extension Set Drill Bit+Right Angle Drill,3Pcs 1/4 3/8 1/2' Universal Socket Adapter Set,105 Degree Right Angle Screwdriver set Drill Hex Bit Socket Adapter
☆【Wide application】105°Right Angle Drill Driver Can be connected to the drill, rechargeable drill or manual wrench, extending their reach to inaccessible stenosis , twisting screws, nut and more..
☆【Multifunction] 3Pcs1/4 3/8 1/2"Square Nut Hex Shank Driver Drill Bit Used in the installation of pneumatic screwdriver, electric screwdriver, pneumatic drill, manual screwdriver and other installation for the hexagonal tool .It is a good accessory for conversion. for Universal Socket,Impact Adapter and Reducer Set,Universal Joint Set,Socket Adapter and Drive Reducer Set,Drive Impact Socket Extension Bar Set,Drive Impact Socket Set..
☆【Features】105° designs for tight spaces, extends the power of a cordless screwdriver - 100 in/lbs. torque, 400 RPM.These Tools are Work Great for Light Drilling,Slow Speed/Screw Driving,Like Cordless Drill,Ratchet Hand Screwdriver,etc..
☆【High Quality】105°Angle Extension Made of Chrome Vanadium steel, high hardness angle drill bit holder, anti rust, durable die cast body with 3 ball bearings for long life [Strong Magnet] Built in strong magnet for good holding power, this right angle drill attachment is easy to use and avoid falling off [Easy To Use] 105 degree angle extension, 360° parallel adjustment,....
MRCM Drill bit Sharpener for High-Speed Steel, Masonry, Carbide, Cobalt, & TiN-Coated Drill Bits,with Adjustable Angles from 90° to 135°,Sharpens 3mm-20mm Drill Bits… (MR-20G)
Capable of sharpening drill bit from 90°to 135°point angle of either a standard or split point..
Sharpens Standard Drill Bits – from 3mm" to 20mm" standard twist bits.Capable of setting the trimming angle to adjust the amount of material taken off on the center point of the drill bit,which will allow production of various drill bits to accommodate different material.
Grinding wheel is optional: CBN or SDC. The CBN model is used for High speed steel material.
while the SDC model is used to grind alloy tungsten steel material..
Capable of sharpening the front rake,front tip angle and clearance angle of drill bits.
Two edge alignment knobs position the cup hole from the edge of the door, while the edge pin sets the distance from the top/bottom..
The drill guide with metal bushing locks into jig and creates a perfectly straight hinge cup hole.
Guide bushings built into body of drilling jig leta you pre-drill pilot holes in 4 common locations, making sure hinges are straight and door closes true. The 1/16″ diameter drill bit for pilot holes is included..
Easily set your cup hole depth on the included 35mm drill bit using the built-in depth setting fixtures on the left and right side..
The hinge marking guide detaches from bottom of jig and allows you to transfer and mark center lines and hinge location to cabinet wall or frame.
90 Degree Angle Drill, Gearwoo 0.8-10mm Right Angle Bend Extension 8mm Hex Shank Professional Cordless Drill Attachment Adapter
▲ Max. 1500RPM and 25N·m torque – This right angle adapter drill can withstand a maximum torque of 25N·m and a maximum speed of 1500 rpm. Heavy duty steel material..
▲90 DEGREE – This 90 degree drill adapter can make drill power swerve 90°and get to hard-reached places..
▲0.8mm-10mm : The right angle drill adapter’s chuck accepts standard 0.8mm-10mm drill bits..
▲ 8MM HEX SHANK – 90 Degree Angle Drill is suitable for most standard drills like hand/power drills, electric drill, buffing attachments etc..
▲After sale& Warranty : Gearwoo sells this product and provides a 6-months warranty, please do not hesitate to contact us if you have any questions.
Angle Gauge Drill Bits, 3Pcs S/S Angle Gauge Measurement Drill Sharpener Tool Set Including Drill Diameter, Drill Bits and General Angle Gauge with Case
Professional Measurement Tool: This is a practical set of angle gauge set in drill bits angle measuring and drill sharpener inspection.
Professional and Standard Parameters: 60 Degree cutting tool for the inspection of tooth‑shaped 55 degree angle and metric thread and inch thread, and also it can measure blade angles.
Comprehensive Angle Range: This set of drill bits gauge has a comprehensive angle range: 60 °, 70 °, 90 °, 110 °, 118 °, 125 °, 135 °, 150 ° and 160 °.
Suitable Utilization: Diameter drill front edge of the protractor 50 gauge 118 ° angle twist drills grinding gauge is suitable for 118 ° diameter of less than 50mm grinding twist drills.
Durable for Long-Time Use: Made of high quality stainless steel, this set of angle gauge has high hardness, and it is durable for long-time use.
Flexible Drill Bit Extension Set, Includes 105° Right Angle Drill, Bendable Drill Bit Extension, 3pcs 1/4 3/8 1/2\ Universal Socket Adapter Set, 3pcs Drill Bit Holder, Screwdriver Bit Kit
【Complete Collocation】Package included 1pcs bendable drill bit extension, 1pcs 105° right angle drill extension, 3pcs 1/4 3/8 1/2" universal socket adapter set, 3pcs Drill Bit Holders, 10pcs screwdriver bit set. These extension kit work great, when you have limited access..
【1/4" 105° Right Angle Drill Attachment】105° Angle 1/4 inch Hex Drill Bit Screwdriver Socket Holder Adaptor,which is quick change compatible and fits most power drill, rechargeable drill, manual wrench and driver chucks..
【Impact Driver Bit Set】1/4 Hex Shank Socket Adapter Impact Set Square Nut Driver Drill Bit 1/4" 3/8" 1/2" ,connect to the standard hex nut drivers, impact hole saws, spade bits and more..
【Drill Bit Holders】1/4 Inch Hex Shank Magnetic Extension Chuck Adapter Quick Release Bar Socket Screwdriver Bit Holder | 60mm/ 100mm/ 150mm Length,Suitable for electric, pneumatic screwdrivers and other screwdriver bits of power tools, drill extended..
【Flexible Shaft Drill Bit Extension】Length: 29cm/11.42" (Approx.).
Features: for Electronic Drill, Connecting Link, Flexible..
Underside keel provides consistent fastener positioning. Radius sides and chamfered edges provide easier alignment and faster installation.
Type 316 stainless-steel trim-head, 6-lobe screws with black-painted heads provide a concealed finish and blend in with EB-TY biscuit. Decking thickness: 3/4 in..
Spacing requirement: 3/32 in. Use for 3/4-in. or greater wood with moisture content greater than air dry (approx. 19%).
Includes: EB-TY Premium biscuits, stainless-steel screws, Ipê plugs for first and last board installations, EB-GUIDE predrilling tool, 1/8 in. quick-release impact-ready drill bit, T-15 6-lobe driver bit for reduced cam outs. Quantity: 275.
