【Easy to Use Construction Tool】RONGPRO laser level for picture hanging with one button operation makes it easy to select Horizontal or Vertical line for indoor or outdoor use. One button controls the laser lines, you could get any angles of the measurement target. Ideal for tile alignment, wall studding, windows, doors, etc..
【Self Leveling Feature】If you are struggling to make laser beam level when you use it,which would waste your much time.This level laser tool could self leveling when located on an inclined surface within 4 °. If the surface inclines over 4 °, the laser will flash to indicate out-of-level condition to remind you to adjust the location of laser leveler tool, which is very easy to use and save your much precious time..
【Multifunction Operation Modes】3 laser level line has two switching models:lock and unlock.Each of them has three measurement modes: vertical laser ,horizontal laser line,cross laser line.Switchable horizontal and vertical red beam laser tool could lock the vertical,horizontal and angle position of the measurement target quickly..
【Green Level Laser With Visibility and High Precision】RONGPRO green laser level takes upgraded chip tech to deliver maximum line laser visibility up to 50ft with 2 times....
RISEPRO 10-Inch Digital Torpedo Level and Protractor IP54 Protected Electronic Bubble Inclinometer, Angle Finder, Gauge w/Large VA Display & V-Groove Base DL135N
RELATIVE OR ABSOLUTE ANGLE MEASUREMENT - The regular absolute measurement mode can measure the angle against horizontal plane. This tool also features with relative measurement mode for quickly measuring angle between two measured surfaces..
EASY READABLE VA DISPLAY & SWITCHABLE UNITS – Clear and bright VA display allows you to use this device in the dark without light. Display modes can be converted from degrees (') to percent (%), to (mm/m), to pitch (IN/FT)..
STRONG MAGNETIC V GROOVE BASE & HOLD FUNCTION - The V Groove base with strong magnets enables strong attachment over a curve or cylindrical magnetic surfaces such as metal pipeline or shafts. Hold function helps save the current angle on the display..
SMART AUDIBLE BUZZER - This inclinometer has beeper sounds feature at horizontal position (0°) or vertical position (90°) which makes you more convenient and easier when it is in use. You can also listen it where you are unable to see the display..
WIDE APPLICATIONS – Great tool for automotive, wood & mechanical industries, machinery, medical fields....
YXGOOD Universal Magnetic Gauge Tool for Car Truck Adjustable Camber Castor Strut Wheel Alignment
【Accurate Measurement】Measures the Camber and Caster angle on the wheel hub or brake disc. Attach the magnetic gauge to the hub or disc brake,suitable for accurate checking of the castor and camber angle Wheel Alignment tool"..
【Adjustable Gauge】Allows you to return the strut to the original camber position after dismantling and re-assembling the suspension or to check the amount of camber change before re-installing..
【Multi-Function】The magnetic gauge tool has a powerful magnet it can easily attached on all kind metal surfaces.Also it could be used as a normal gradienter.(Note:Please double check and make sure the panel is balance before using.You could screw the button behind the gauge to adjust panel level).
【Easy To Read】Size: 4.5’’*1.2’’*0.8’’,it has a simple leveling adjustment from -5 degrees to 5 degrees.Body of gauge is made of high density aluminum and precision level vial,high strength plasticity..
【Professional Tools】Allows adjustment to maintain correct wheel alignment and even tyre wear.Suitable for automobile cars motorcycles trucks vans SUV tire repair..
eOUTIL Digital Level Angle Finder Waterproof IP65 Protractor Angle Gauge Inclinometer with V-Groove Magnetic Base/0~360 Degree
V-groove Magnetic Base: This magnetic V-groove base of digital angle gauge can be firmly attach to ferrous metal surfaces like pipe, steel construction framing, metal fabrication. Rugged durable aluminum frame for precision leveling measurement.
Absolute & Relative Measurement: This digital protractor has absolute angle measurement to test whether the working surface is on the level to check roof slopes, wheel alignment, etc. Moreover, this magnetic level lets you check the relative angles between the surfaces.
High Accuracy: Accurate to the ±0.1° at 0° and 90°.
±0.2° at other angles. Displays angle and bevel readings in degrees, pitch IN/FT, mm/M, and percent slope. With reading hold function, it is convenient to record by this level digital inclinometer bevel box. Moreover, you can have an accurate measurement of the angles between two measured surfaces.
Backlight LCD Display With Audio Indicator: Featuring a large, bright LCD display you can easily read the measurements whatever the light conditions. The display value reverses automatically when the electronic level is upside down. Acoustic signal routing via beeps when you reached 0° or 90°.
IP65 Waterproof And Dust-proof Level: It has IP65 protection which makes it suitable for use in harsh ....
Functions include actual distance, horizontal distance, height, angle and verticle seperation (difference in height between two targets) measurements as well three-point measurement (height between two points)..
Measurement results are displayed on both internal and external LCD panels. The external panel displays all results simultaneously..
HYPER READ provides quick and stable measurement responses in approx. 0. 3 second regardless of distance..
Digital Angle Finder Protractor, Preciva Digital Protractor 7 inch / 400mm Stainless Steel Measuring Ruler with Large LCD Display for Woodworking, Measurement, Construction Angle Measuring Tool
【Large LCD Display & High Precision】 Preciva digital protractor is equipped with a large LCD display for easy reading.
【Locking Function】Convenient locking screw-by pressing the screw, the ruler can be kept at any angle.For maintain its accuracy and read it easily, Preciva angle finder could be locked at any angle..
【2 in 1 Digital Protractor】Digital stainless steel ruler and angle finder combo makes precise measurements.the hinge mechanism on the angle rule allows complete 360-degree measurement of internal and reverse angles.
The protractor combines standard and metric scale scales.Relative and absolute angle measurement..
【Durable Rulers & Low Power Consumption】The digital protractor angle gauge & angle finder durable stainless steel body can be used for a long time.
HOLD and RESET function, laser engraving scale, clear and accurate, will not fall off.In addition, it also has the advantage of energy saving, it will automatically close after 6 minutes of inactivity..
【Battery Included】Large capacity standby with automatic power-off function ,use a CR2032 button battery to work for more than 2000 hours .Saving power consumption and extending battery life..
House, Home and More Set of 15 Skid-Resistant Carpet Stair Treads - Burgundy Red - 9 Inches X 36 Inches
PROFESSIONAL DESIGN: Neitra stair tread template tool has been patented. It is designed with sliding rods with a male and female fit slot, making the measurement more accurate, stable and easier to use. Accurate and clear ruler markings allow the stair tread installer to accurately measure the length and angle of treads and risers. Dual-use design of the sliding rod and wooden bar..
COMPLETE ACCESSORIES: Each set of stair tread measuring tools consists of (2 × tread templates, 2 × 16-inch sliders, 2 × 12-inch sliders, 2 × 8-inch sliders, 2 × wooden strip fixing blocks, 9 × knobs, 5 × long screws, 9 × short screws, 1 × washer, 1 × 6-angle screw wrench, 1 × toolbox.) which can be used in combination to form one piece of tread template according to the actual stair length and at any angle. This is an essential tool for precision cutting and professional measurements..
RELIABLE AND DURABLE: The stair gauge is made of an impact and chemical resistant aluminum-alloy material with thickness up to 5 mm, making it resistant to damage and bends. The CNC anodized surface is wear-resistant and rust-proof, and the electroplating markings are more precise and clearer. With superior quality, reliability and durability, this stair measuring tool will help y....
TAGVIT 1/2 Inch Drive Digital Torque Wrench, 7.38-147.5 ft-lbs./10-200Nm Angle Digital Torque Wrench, Electronic Torque Wrench with Buzzer and LED Flash Notification, ±2% Accuracy
Four Torque Measurement Units: This digital torque wrench can measure from 7.38-147.5 ft-lbs./10-200Nm, with easy to read LED display, available in Nm, Ft-lb, In.lb, Kgf.cm four measurement value switching, can adapt to the application of different torque unit measurement. The angle digital torque wrench has an accuracy of ±2% clockwise and ±3% counterclockwise. Comes with a calibration certificate and conforms to ISO 6789 and ASME B107.14M standards..
Buzzer & LED Indicator: When the set torque is reached, the 1/2 inch torque wrench will emit a flashing light, and the buzzer will sound to remind you to stop applying force to avoid damage caused by excessive torque. The angle torque wrench provides 10 preset values, which can save the commonly used torque values and angle values, and can set the upper and lower limits of the torque value and angle value alarm, which is convenient and fast for daily use..
Four Measurement Modes: The 1/2 inch drive digital torque wrench has TRACK real-time mode and PEAK mode, torque mode (A1) and angle mode (A2). By quickly switching the four modes of A1&TRACK, A1&PEAK, A2&TRACK, and A2&PEAK, it can meet your dif....
【Professional Test】Master precision level is used to check machine's horizontal and vertical positions of equipment installation..
【Base with V-groove】AIWFL master precision level has a base with v-groove, which can also be applied to small-angle measurement and working surfaces with V-grooves..
【Cross Test Vial】Additional cross level enables the user to check side declinations..
【Application】It is mainly used to check the straightness of the guideways of various machine tools and other equipment, the correctness of the horizontal and vertical positions installed, etc..
ARES 43007 - 3/8-Inch Drive Flex Head Electronic Digital Torque and Torque Angle Wrench - 10-100 ft/lbs (13.5-135Nm) - Reversible Sealed Head - Multi-Alert Prevents Over-Torquing
...ures within 10-100 ft/lbs (13.5-135Nm) with an accuracy tolerance of ±2% clockwise and measures torque angle with 3 separate modes: Peak Torque, Torque Angle and Peak Torque Angle. The easy-to-use digital LCD interface lets you adjust your specified torque with the push of a button and switch between five units of measurement: Nm, ft/lbs, in/lbs, kgf/m, and kgf/cm..
DESIGN: This digital torque wrench features a multi-alert system to help ensure you do not ever over-torque a bolt. When your specified torque is reached, the proprietary ergonomic comfort grip handle will vibrate, a audible buzzer will sound, and the LCD display back light will flash and then light up a solid red color to let you know it’s time to release. Each torque wrench also offers ten presets, so you can save and select your most frequently used torque and angle settings..
FLEXIBILITY: Each electronic digital torque wrench features a flex head ratchet design with peak torque, torque angle, and peak torque angle modes, so you can get exactly the right torque in exactly the right position. The “Peak Torque Angle” mode measures specified torque and immediately measures torque angle so you can torque down and finish tightening without needing to remove the wrench from the bol....
