Best Ansi Shaft Part

ULTNICE Quartz Clock Mechanism Battery Operated DIY Wall Clock Movement Repair Parts

  • Size About : 5.6 x 5.6 x 1.5cm/2.2 x 2.2 x 0.6inch. The total length of the shaft is 12mm, and the length of the yellow spiral is 5mm. ( Please Note: Please measure the shaft of you clock mechanism you need before buying ! ).
  • Diameter : The Minute Shaft Diameter is 3.6-3.7mm, and the Hour Shaft Diameter is 5.5mm. Screw Shaft Diameter 7.6mm..
  • For DIY quartz wall clock replacement movement part, applicable framless 3D Wall clock. The error is less than +-1.5 seconds/day, and the power consumption is less than 200 microamps..
  • Powered by 1 AA battery(Not Included, You can use No.5 AA batteries, carbon batteries, alkaline batteries. Cannot Use Rechargeable Batteries)..
  • IMPORTANT : This model is a 5mm ordinary shaft, which is suitable for clock panel thickness of not more than 4mm, otherwise the front nut cannot be tightened and the clock cannot run ! !(Due to different measuring tools and measuring methods, the measured length may be slightly different from the actual one. Thank you for your understanding!!!).
Check Stock

Rocker Arm Shaft Assembly 4892293AC Replacement for 2005-2010 Chrysler 300 Sebring Dodge Charger Challenger Magnum 3.5L MSQ-CD (Pair)

  • Rocker Arms Shaft Lifter Assembly, Set of 2.
  • Replacement Part Number: 4892293AC, 4892293, 04892293AC.
  • Rocker Arms Lifters Shaft Assembly Replacement for Chrysler Town and Country 4.0L V6 2008-2010.
  • Rocker Arms Lifters Shaft Assembly Replacement for Dodge Avenger 3.5L V6 2008-2010.
  • Please be sure to compare carefully with Photos or OE numbers before purchasing items.Once a problem occurs with the purchased product, please do not hesitate to let us know..
Check Stock

SSM-16HR Oven Microwave Turntable Motor Carousel Synchronous Motor AC21V 3W 2.5/3 RPM WB26X10143、6549W1S011B（1 PCS）

  • Part Number： Non-OEM,Microwave with "D" shaft Turntable Drive Motor（Shaft Diameter: 7mm/0.28in, Shaft Length: 9mm/0.35 in） SSM-16HR....
  • Electrical parameters: AC frequency: 50/60HZ voltage: 21AC power: 3W speed: 2.5/3r/min rotation direction: CW/CCW class: E When purchasing, please....
  • Replacement part number: WB26X10143 replacement (6549W1S011B, SSM-16HR, ).
  • Suitable brands/models: GE ST16FE EX73SAAA3 WB26X10143 and LG 721.63252301 721.63254301 MPDJ030BF JES35BJ JES738WJ02.
  • The drive motor is located under the glass microwave turntable. Before starting this repair, make sure to disconnect the microwave power. Just use a....
Check Stock

Drum Mixer Blade for Tight Head 55 Gallon Barrel-36 Shaft

  • Barrel Mixer has Three, 2 1/8 inch diameter mixing heads which fit directly into the coarse thread bunghole of the 55 Gallon Barrel..
  • Dim. (head x shaft x length): Three 2 1/8" Mixer Blade Diameters x 1/2" Shaft Diameter x 36" Shaft Length.
  • This part fits most hands held air motor or power drill for 1/2 inch chuck..
  • Cast aluminum mixing heads allow you to use this with most materials..
Check Stock

Legend 350-406 Square Head Pipe Plug, 1-1-4', Threaded, Class 150

  • Brand Name|Legend Valve & Fitting#MFR Part Number|350-406#UPC|662545025223#UNSPSC|40173506#Item|Pipe Plug#Type|Square Head#Nominal Size|1-1-4 Inch#End Style|Threaded#Pressure Class|Class 150#Working Pressure|150 psi#Method of Manufacture|Cupola Casting#Material|Malleable Iron#Material Specification|ASTM A197#Finish|Galvanized#Color|Black#Industry Standards|ANSI B16.3, ANSI B1.20.1#Temperature Rating|200 deg F#Standard-Approvals|NSF 372 Standard, UL Listed, UPC-IAPMO#Application|For Low Pressure.
Check Stock

4Pcs 1:10 RC Car Drive Shaft Front and Rear Universal Axles Drive Shaft CVD Heavy Duty Compatible with 1/10 Traxxas Slash 4X4 Rustler VXL 4WD Replacement Parts (Gray)

  • ▶Compatibility: 4Pcs front and rear drive shaft CVD heavy duty replacement parts, compatible with 1/10 scale Traxxas Slash Platinum/Ultimate/VXL 4x4 4WD, Hoss 4X4 VXL, Rustler 4X4 VXL, Stampede 4X4 VXL etc..
  • ▶Update Material: CVD drive shaft made of high-quality metal materials: middle part and wheel hex adaptor is made of 6061-T6 alloy, axle part is made of update material Q235 Carbon steel, ensuring maximum durability and for long time service life..
  • ▶Performance: Ingenious design, professional manufacturing and fine workmanship, high reliability, ensuring smooth transmission..
  • ▶Separate use or use together: Good compatibility, suitable for most 1/10 traxxas rc car models, you can separate these front and rear drive shaft CVD or use them together according to your needs..
  • ▶Easy to install: these rc cars drive shaft CVD comes with Screws and nuts and easy to use, you can directly use them on your RC car model. If you have any questions during use it, please contact us anytime..
Check Stock

CTS TAOT Custom 500K SHORT Split Shaft Audio Taper Pots - Set of Four (4X) - 10% Tolerance – 450G

  • TAOT CUSTOM Series Pots -High Quality Brass Bushing & Brass C-clip reinforced Shaft Part #450S500K TAOT.
  • Short Split Shaft (3/8" Height X 3/8" Diameter Bushing).
  • 24 Tooth Fine Spline .236" Diameter Shaft.
  • Audio Taper suitable for both Volume & Tone controls.
Check Stock

Deebior Compatible with 80-82 C10 80-83 C10 Suburban 80-83 C30 80-83 C50 80-82 K10 80-83 K10 Suburban 80-83 K20 80-83 K20 Suburban 80-83 K3 or Truck Black Tilt Steering Column Column Shift

  • Intermediate Steering Shaft : Keeps the steering gearbox and steering wheel connected. The universal joint or also called as u-joint at the end of the steering shaft connects to the steering gearbox which has another u-joint that connects to the steering wheel allows for the angles between them to be supported resulting to your vehicle wheels smooth and easy turning..
  • Direct Replacement - Easy Installation:While this is not a genuine OEM part, it is a direct replacement and will fit, work and function like the original part. This replacement intermediate steering shaft is manufactured from high quality steel to ensure longevity providing excellent value..
  • Universal Joint :Direct replace your worn or damaged steering shaft, with new U-Joints featuring precision needle bearings for smooth, silent operation and reliable performance..
  • Cost-effective:We are a factory direct sales.Customers can spend a small amount of money and get high quality Brand new Intermediate Steering Shaft..
  • PLEASE NOTE: Before placing the order, please check your car model in the Amazon Fitment Filter System in the top left corner,Do not count on year make and model only,please view compatability tab including the notes,or send us a message to make sure it matches exactly..
Check Stock

Left Hand .335 Golf Shaft Adapter Sleeve for Cobra King F9 Speedback Speedzone F8 F7 F6+ Fly-z Driver

  • Left Hand Golf Shaft Adapter Sleeve For Cobra RAD Speed King F9 speedback, speedzone, F8 F7 F6 Plus Fly-z Bio Cell Driver 1#.
  • If you need right hand adapter, please check ANSI: B07SS9JH4L.
Check Stock

Quartex Q-80 Quartz Clock Movement, 5/16” Max Dial Thickness, 13/16" Hand Shaft Length

  • To request hands, Purchase item first then immediately contact seller and ask for a customization, in that message, include the part # of the hands you want. Choose from the photos in the upper left..
Check Stock