Best Arc Welding Electrode Holders

Eastwood Mp 200 Amp Welder Electrode Holder Stick Rod Stinger Copper Plier Electrode Clamp of Welding Machine with 3 Meter Long Cable

  • 200 Amp Electrode Holder For Stick/Arc Welding With 3 Meter Long Cable.
Check Stock

Mini Welding Machine 110V Plug, 250A Stick MMA Welder Machine IGBT Digital Smart VRD Hot Start with Wire、Tongs, Ground Wire, Clip, Mask and Gloves.fits Below 3.2mm Welding rods

  • Mini Welding Machine capable of welding mild steel, carbon steel, stainless steel and cast iron.can handle E6010 cellulose electrode, is ideal for AWS E6010 E6011 E7018 E6013 of 1/16"-1/8"(1.6mm-3.2mm), and E40 series electrodes。.
  • The Miuezuth MINI arc welding kit has multiple protection mechanisms to improve the safety factor, the insulation protection level is "F", and the enclosure protection level is "IP21", which can ensure your safe use. With overheating and overcurrent automatic protection. This small welder is very easy to use, even a novice can use it..
  • The Miuezuth welding machine adopts the most advanced IGBT technology, the efficiency reaches 85%, and the power factor is 0.93. The miniature welding equipment reduces the loss of copper and iron, which is very energy-saving, the energy optimization effect is remarkable, and the welding efficiency is significantly improved..
  • The Miuezuth ARC Portable Welder features an easy-to-carry carrying strap, compact and lightweight body, and a colorful hard carton packaging for easy storage and portability. Whether you work indoors or out, this welding machine is your go-to welding tool..
  • Every Miuezuth IGBT rod stick welder machine is inspected before leaving the factory to ensure that it meets the hig....
Check Stock

Sprayway Industrial Welder's Anti-Spatter Spray, Case of 12 (20 oz) Cans

  • Handy for automotive, electrical, hardware, industrial, signs/display, welding.
  • Prevents spatter buildup on welding gun nozzles, electrode holders and contact tips.
  • Reduces downtime caused by spatter accumulation.
  • Heat-resistant. Will not interfere with finishing operations.
Check Stock

Sprayway Industrial Welder's Anti-Spatter Spray, 11 oz. can, 1 Count (SW725)

  • Handy for automotive, electrical, hardware, industrial, signs/display, welding.
  • Prevents spatter buildup on welding gun nozzles, electrode holders and contact tips.
  • Reduces downtime caused by spatter accumulation.
  • Heat-resistant. Will not interfere with finishing operations.
Check Stock

Welding Electrode Holder Cuwiny 300AMP High Quality Copper Electrode Clamp Jaw Holding Plier Fit for ARC Welder Welding Machine Stick Electrode Welding American Design

  • This Electrode holder is Made of high quality Copper materials for high conductivity and improved cable connections. Supplied with an allen wrench and cable connection ferrule, assuring efficient connnection and minimizing cable strand breakage at the connection. (New product promotion, only this week. Reviews and feedback, contact us for 20% off.).
  • Used # 1 AWG Gauge Cable and High-quality Copper..
  • Fit for Arc Welder 200A 300AMP etc,Suit for various kinds of Stick Welding Rods Electrodes etc..
  • The high temperature/high impact-resistant molded fiberglass fully insulated body to protect against electrical shock and have powerful spring loaded non-slip insulated clamping jaws to hold the electrode tight so it will not slip while welding..
  • Satisfactory after-sales service:Cuwiny products have 1 Year after-sales customers service guarantee.Please contact us for any assistance..
Check Stock

HITBOX TIG Welder 110V 220V 200A 2T 4T TIG Stick MMA IGBT Inverter High Frequency Dual Volatge Welding Machine (Model: TIG200A)

  • Ship from the United States. Dual Volt 200 amp IGBT Tig Stick Welder with tig torch, earth clamp, electrode holder and gas tube..
  • Adopt newly IGBT inverter technology, Compared to MOS Technology, greatly reduce breakdown.
  • Inverter frequency up to 100KHZ, the technology is mature, stable performance.
  • TIG Welding thickness 0.5-6mm, and application of electrode diameter (MM): 2--3.2mm.
  • Easy arc ignition, litter spattering, stable current and good shaping.
Check Stock

GZ GUOZHI 130A Stick Welder, Super Mini and Portable Welding Machine, Hot Start 110V ARC MMA Welder Machine, Digital Display IGBT Inverter Welder, Welded Normally at Minus 20 Degree

  • ...arantee】: Welder machine with Over-heating protection, Over-current protection and over-loading protection,use more safety ,quality more assured..
  • 【Best Choice for Beginner】: This welder ideal for E6011.E6013.E6014.E7018 and welding rods below 1/8 inch.It can weld 10 electrodes in a row without protection,with high duty cycle..
  • 【Adjustable Voltage & High-Quality Accessories】: 20A-120A adjustable current, 90V-140V wide-voltage design, unafraid of the voltage fluctuations. Accessories included: 10-feet 500A Electrode Holder Assembly, 10-feet 500A Work Clamp Assembly, High quality auto darkening welding glasses, etc. High-quality accessories, durable and not easy to damage..
Check Stock

T TOVIA Welding Electrode Holder ARC Stick Manual Screw Twist Type Head, 300 Amp

  • Fully insulated head mechanically holds the stick electrode tight for easy bending & better arc control eliminating arc out problems.
  • Firmly holds electrodes up to 5/32" (4mm) diameter in 45° or 90° positions to accommodate a variety of welding applications.
  • Round DMC head provides increased visibility, and allows rod to be burnt to the end.
  • Insulated rubber handle with copper core for both high conductivity and improved cable connections.
  • The base of the handle has a rubber that surrounds the wire preventing debris and water to some extent from entering the handle.
Check Stock

SÜA - Aluminum E4043 Stick Electrode Rod 3/32\ x 14\ - (1 Lb)

  • SÜA - E4043 is used for production or maintenance and repair welding on all weldable grades of aluminum sheets, plates, pipes, castings, and extrusions with a minimum of 3/32” thickness. Special extruded coating in this electrode is dense and without the air holes found in cheaper dip-coated electrodes and it provides a gas atmosphere to protect the arc..
  • ***READ THIS: The images are for reference only. Please check Picture #2 for an approximate quantity of electrodes per pound***.
  • Can be used as a SMAW-stick electrode or as an oxyacetylene brazing rod. Very easy to use with an exceptionally stable arc, operating at low amperages with a very minimal amount of spatter or fumes. Weld deposits are strong, dense, porosity-free with good color match and corrosion resistance. Good weldability.
  • rapid ignition and re-ignition, little splashing, easy removal of oxides, the characteristics of the joints are particularly good. Good capillary fluidity..
  • Commonly used on irrigation piping systems, refrigeration equipment, appliances, boat parts, ornamental aluminum parts, aluminum door or window frames, aluminum ladders, tanks, shelves, automotive, trucks or bus parts, machining errors, and building-up missing sections on castings, extrusions, and plates..
Check Stock

AmicoPower MMA-200,200 Amp Stick Arc Lift-TIG DC Inverter Welder,110 and 230V Welding Machine

  • Advanced IGBT inverter technology, excellent Arc stability, hot start, anti-sticking, forces adjust, steeples amperage control, all generators....
  • Automatic compensation for voltage fluctuation, over voltage protection, under voltage protection, over current protection, over load protection..
  • Fan automatic temperature control, intelligent fan control operates when welding commences to cool components and reduce airborne contaminants pulled....
  • This is specially designed welding machine, can use all electrode, with force adjustment function..
  • 110V/230V dual voltage input. All machines tested in the USA and one-year warranty..
Check Stock