Best Arduino Micro Usb Power Supply

Type C to Dual USB Adapter eTECH Collection Type C OTG USB Male to Dual 2.0 Female OTG Charge 2 Port HUB Cable Y Splitter 1 Pack

  • Connector:USB - A female of Micro USB male + Micro female data cable..
  • Dedicated Micro USB Male to USB female OTG cable..
  • USB powered with a separate, tested USB keyboard and U disk are OK, get an external USB power supply mobile hard disk.
  • At the same time it can be used with a micro usb interface MID, UMPC, and e-book for OTG transmission function.
  • Works With The Following:for micro usb interface equipment.
Check Stock

Norsimda 6.5 Feet 11 Pin Micro USB to HDMI Adapter Cable 1080P HDTV for Samsung Galaxy S5 S4 S3 Note 3 Note 2 Galaxy Tab 3 8.0 Tab 3 10.1 Tab Pro Galaxy Note Pro 12.2

  • Compatible ONLY to Samsung 11-Pin micro USB interface device, including: Samsung Galaxy S3/S4/S5/Note 2/Note 3, Galaxy Tab 3 8.0, Tab 3 10.1, Note 8,....
  • Mirror your Samsung MHL phones through the standard HDMI output on a compatible TV.
  • Note: user must connect the USB cable to supply power. The micro USB goes in to the device for data (the current might not be enough to charge the....
  • Connect the USB cable to a power adapter(at least 5V 1A) to supply power for the HDMI connector(if no power,it will not work).
Check Stock

KEYESTUDIO Pro Micro Atmega32U4 5V with USB Cable for Arduino Projects 1PC

  • It includes four analog inputs, five PWM pins, twelve digital inputs/outputs and hardware serial port Rx and Tx..
  • Operating voltage is 5V and working frequency is 16MHz ,and we can supply power via micro USB cable and port RAW GND (DC 7-9V)..
  • The anode of power supply board must be connected to the "RAW".
  • We also added a PTC fuse and diode to protect power supply circuit..
  • How to use: search for "KEYESTUDIO WIKI KS0503" in Google Chrome to get the wiki online tutorial for this Pro Micro..
Check Stock

USB Power Cable Adapter for Fire TV Stick,Powers Streaming TV Sticks Directly from TV USB Port(Eliminates AC Adapter and Very Long Power Cable)

  • ...t/TV Sticks and other streaming sticks..
  • Easy to install, plug and play, no driver required, just plug the micro USB into the Fire Stick, and then plug the USB A into the USB port on the side of the TV, which perfectly solves the problem of some TVs failing to start or restarting repeatedly due to insufficient power supply..
  • Built-in 5V power conversion module, multiple protection circuits, the TV’s USB voltage through the chip for constant voltage and constant current output, so that the streaming media stick works stably. The highest output is 5V/2A, Allows you to provide enough power support when enjoying 4K movies..
  • Note: Please wait patiently for about ten minutes to charge the device before the initial installation and use. The device only provides the fire stick power when the TV is turned on. After the TV is turned off, the power supply will automatically stop, saving energy and environmental protection. If you have any questions, please feel free to contact us, you will get a satisfactory answer within 24 hours..
Check Stock

Samsung Galaxy J7 (16GB) J700F - 5.5' Dual SIM Unlocked Smartphone, International Model (White)

  • Samsung 2.0 USB Power Adapter EP-TA20JWE + Samsung 2.0 Micro USB EP-DG925UWE.
  • Compatible with: Samsung Galaxy S6 / S6 Edge / S7 / S7 Edge and more with Micro 11pin.
  • Input / Alimention:100-240V ~50-60Hz 0.50A, Output / Sortie :9.0V===1.67 or 5.0V=2.0A S/N R37G. LTE Power Supply Only Original Samsung Galaxy Power Adapter Cube Weighs 1.5oz.
  • IMPORTANT NOTE: Only Original Samsung Galaxy S6 / S6 Edge / S7 / S7 Edge are compatible with fast charging technology The Samsung Adaptive Fast Charging Micro-USB Wall Charger enables rapid recharge on your devices..
Check Stock

Yahboom 4 Port USB 3.0 Hub for Raspberry Pi Jetson Nano ROS Robot, Compatible with USB 3.0/2.0/1.1 Driver-Free Plug&Play, Onboard External USB-A,5V (Micro-USB),9~24V Power Port, for High-Power Device

  • VL817 main control chip -- USB3.0 HUB expansion board aims to solve the problems of insufficient USB interface on the main board and insufficient power supply caused by the increase of USB peripherals.Equipped with VL817 main control chip scheme, the main control board performance is stable and the transmission is stable and safe. It uses USB3.0 communication interface and HUB chip expand 4 USB interfaces to ensure high-speed data transmission of the interface..
  • 1 to 4 data extension -- The expansion efficiency of the four ports is doubled and Each USB device has an independent indicator light. Built in over current protection, short circuit protection and power reverse connection protection circuit to ensure the safe use of USB devices..
  • Support wide voltage external power supply -- In addition to the USB-A standard data interface power supply, this product also supports 5V (micro-USB), 9~24V (DC interface/XH2.54 socket) wide-voltage external power supply. Even if multiple high-power peripherals are connected at the same time, the stability of power supply and signal transmission can be guaranteed..
  • Support equipment -- Support ROS robot / car, Raspberry Pi / Jetson series board, PC, other boards, industrial computer, etc. Compatible with win7 / 8 / 10....
Check Stock

HiLetgo 3pcs ESP32 Mini ESP-WROOM-32 Development Board WLAN WiFi Bluetooth IoT Development Board

  • ESP32 Mini development board, everything needed to program the ESP32 module, ESP32/32S WIFI Development Bluetooth ESP8266 Module CP2104 for Arduino IDE..
Check Stock

Arducam IoTai ESP32 CAM WiFi Bluetooth for Arduino UNO, PSRAM Development Board with Camera Module OV2640

  • Arducam IoTai is based on ESP-32S module, uses onboard 4MByte PSRAM and 2MP OV2640 camera module, which makes it possible to capture and process the image..
  • Fully compliant with WiFi 802.11b/g/n/e/i and Bluetooth 4.2 standards, supports both Arduino IDE and ESP-IDF software development tools, and keeps the same form of factors and pin-out as the standard Arduino UNO R3 board..
  • Powered by micro USB or lithium battery, supports lithium battery recharging..
  • The onboard camera interface can directly connect most of the parallel port cameras like OV2640, OV7670, OV7725 and etc. This board can also work with Arducam multi camera adapter (ASIN: B07TYL36MC), which makes this board can connect multiple SPI cameras (up to 4)..
  • Supports face detection and recognition in low frame rate, supports three low power wake-up modes, very suitable for home security, industrial wireless control and other IoT applications..
Check Stock

USB C Hub, SD Card Adapter, 6-in-1 USB C Multiport Adapter with 3 Powered USB 3.0 Ports, 5Gbps Speed SD/TF Card Readers for MacBook, MacBook Air, PC/ Laptop, Smart Devices with USB-C, Silver

  • INNOMAX 6-in-1 Powered USB 3.0 type-C hub instantly expands 3 USB 3.0 ports, SD and TF slots on your USB-C Devices and supply extra DC 5V power to USB devices connected. Compatible with MacBook Pro, MacBook Air, MacBook 12”, iMac/iMac Pro and other computer with USB-C, such as: Dell XPS 13, HP Spetre X2, etc.
  • Three Powerful USB 3.0 Ports: The USB 3.0 ports transfer data up to 5Gbps, support usb keyboard, mouse, usb driver, usb hard disks. The external power micro USB port could plug in external DC 5 V power source to power up large power consumption USB devices(To Buy the DC 5V 3A adapter, please search INNOMAX DC5V 3A adapter on amazon.com).
  • Powerful Memory Card Readers: It supports SDXC,SDHC,SD,MMC,RS-MMC and Micro SD, TF, Micro SDXC, Micro SDHC, UHS-I, cards. Size of SD, SDXC, SDHC,Micro SD, CF card up to 5TB and maximal transferring speed is 5Gbps which is perfect for Photographer or Designers.
  • Valuable Features: The SD and TF card slot was designed with spring loaded feature to make card reading accurately and make the valuable data to be safe. Smart working LED allow you to know if a card is correctly plugged in and monitor the data transferring status in real time..
  • What You Get: 1xUSB-C Hub device( aluminum alloy housing), 1x manual book (Cable....
Check Stock

Mini UPS Battery Backup 37Wh Uninterruptible Power Supply for Router, Modem, Security Camera with Input 5V DC Output 5V DC Max.3A Support Micro USB

  • Mini uninterruptible power supply for power outage, compatible with router, modem, security camera, DSL, and other 5V DC and Micro USB devices, and can still use WiFi in case of power outage..
  • Compact 5V DC backup battery, built-in 10000mAh 37Wh Li-polymer battery, offers a long backup time for the loading device..
  • Input: DC 5V or Micro USB 5V Max.3A, Output: DC 5V or Micro USB 5V Max.3A, support 0.5A, 1A, 1.5A, 2A, 2.5A and any current below 3A. No charger included, please use the original charger of the loading device..
  • Including 1×DC cable 5.5×2.5mm, 3×DC jacks 5.5×2.1mm, 4.0×1.7mm, 3.5×1.35mm and 1×Micro USB jacks..
  • Multiple smart protections: short circuit protection, voltage fluctuation protection, overcharge protection, over discharge protection, temperature protection, safe to use..
Check Stock