Best Arduino Nano Adafruit

1.54 Inch E-Paper Screen Display Module Resolution 200x200 3.3v E-Ink Electronic Display with Embedded Controller SPI Interface Support Partial Refresh for Raspberry Pi/Arduino/Nucleo/Jetson Nano

  • This is an E-Ink display module, 1.54inch, 200x200 resolution, with embedded controller, communicating via SPI interface, supports partial refresh..
  • No backlight, keeps displaying last content for a long time even when power down.
  • Ultra low power consumption, basically power is only required for refreshing.
  • Onboard voltage translator, compatible with 3.3V/5V MCUs.
  • SPI interface, for connecting with controller boards like Raspberry Pi/Arduino/Nucleo, etc..
  • Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32).
Check Stock

Testeronics 7 in 1 Breadboard Power Module Kit Compatible for Arduino/Raspberry Pi| 2PCS 3.3V/5V Power Supply Modules | 9V/1A Power Adaptor | 2PCS Solderless Breadboard 400 Points|65 PCS Jumper Wires

  • [Breadboard Power Module] Input voltage: 6.5-9V (DC Jack) or USB power supply.
  • [9V / 1A Power Adaptor] Output 9V / 1A DC, Input: 100~240V AC. US Plug 5.5mm x 2.5mm.
  • Compatible for Arduino UNO R3 Mega 2560 1280 ..
  • [400 Breadboard] 400 Points Solderless Breadboard, ABS Plastic Body, Fit for 21-26 AWG (0.4-0.7MM) wire. Compatible for Arduino Nano, ESP32, Raspberry Pi Pico..
  • [DC Power Splitter Cable] 1 Female to 2 Male 5.5mm x 2.1mm DC Power Adapter Splitter Cable.
  • [65 Jumper Wires] 65 PCS 24AWG Breadboard Solid Multi colors pure Copper Jumper Wires Kit.
Check Stock

HiLetgo 3pcs Nano V3.0 3.0 Controller Terminal Adapter Expansion Board Nano IO Shield Simple Extension Plate for Arduino Mano AVR ATMEGA328P

Check Stock

Lighthouse LEDs 12v 3mm Flat Top Pre-Wired Amber/Orange LED - Ultra Bright (10v, 11v, 12v, 13v, 14v, 15v) (Pack of 20)

  • 12v 3mm Flat Top Pre-Wired Amber / Orange LED - Ultra Bright (10v, 11v, 12v, 13v, 14v, 15v) (Ships from US).
  • Size: 12v Pre-Wired 3mm Flat Top Wide Angle LED, Color: Orange/Amber, Luminosity: 8,000-9,000 mcd.
  • Forward Voltage: 10v-15v (volts) (15v Not Recommended Continuous), Current: 20mA, Wavelength: 600-610nm, Operating Voltage 10v-15v (volts) (15v Not Recommended Continuous), Wire Length: Approximately 15cm (6 inches).
  • Viewing Angle: 105-115 Degrees, MountStyle: Custom, Lens Color: Clear, Resistor Built In: Yes, Additional Resistor Required: No, Shrink Wrap: Yes, Mount Style: Custom.
  • Super bright LEDs, used for mods, RC, adruino, cars, HO Scale models, planes, trucks, adafruit projects, halloween, christmas, PC, Ultra Light, Pre-Soldered Leads, solder, litz, micro, diode, nano, pico, milli.
Check Stock

Lighthouse LEDs 12v 5mm Flat Top Pre-Wired Amber/Orange LED - Ultra Bright (10v, 11v, 12v, 13v, 14v, 15v) (Pack of 10)

  • 12v 5mm Flat Top Pre-Wired Amber / Orange LED - Ultra Bright (10v, 11v, 12v, 13v, 14v, 15v) (Ships from US).
  • Size: 12v Pre-Wired 5mm Flat Top Wide Angle LED, Color: Orange/Amber, Luminosity: 9,000-10,000 mcd.
  • Forward Voltage: 10v-15v (volts) (15v Not Recommended Continuous), Current: 20mA, Wavelength: 600-610nm, Operating Voltage 10v-15v (volts) (15v Not Recommended Continuous), Wire Length: Approximately 15cm (6 inches).
  • Viewing Angle: 105-115 Degrees, MountStyle: Custom, Lens Color: Clear, Resistor Built In: Yes, Additional Resistor Required: No, Shrink Wrap: Yes, Mount Style: Custom.
  • Super bright LEDs, used for mods, RC, adruino, cars, HO Scale models, planes, trucks, adafruit projects, halloween, christmas, PC, Ultra Light, Pre-Soldered Leads, solder, litz, micro, diode, nano, pico, milli.
Check Stock

Ingcool 4G / 3G / GNSS HAT Board for Raspberry Pi 4B/3B+/3B/2B/Zero/Zero W/Zero WH,Jetson Nano Based on SIM7600A-H 4G Support 4G Connection,LTE CAT4 for Downlink Data Transfer,

  • Compatible with Raspberry Pi 4B/3B+/3B/2B/Zero/Zero W/Zero WH,Jetson Nano,Onboard USB interface, to test AT Commands, get GPS positioning data, and so on,Onboard CP2102 USB to UART converter, for serial debugging.
  • Breakout UART control pins, to connect with host boards like Arduino/STM32,SIM card slot, supports 1.8V/3V SIM card.
  • This Product mainly applicable in North America (US, CA, MX). Supports dial-up, telephone call, SMS, MMS, mail, TCP, UDP, DTMF, HTTP, FTP, etc.Supports GPS, BeiDou, Glonass, LBS base station positioning.
  • Onboard audio jack and audio decoder for making telephone call,Onboard voltage translator, operating voltage can be configured to 3.3V or 5V via jumper,2x LED indicators, easy to monitor the working status.
  • Supports SIM application toolkit: SAT Class 3, USAT,Comes with development resources and manual (examples for Raspberry Pi/Arduino/STM32).
Check Stock

waveshare SIM7600G-H 4G DONGLE LTE USB Adapter for Industrial Grade 4G Communication and GNSS Positioning,Support/PC/Raspberry Pi/Drone/Industrial Computer,150Mbps Downlink Rate,Global Band Support

  • Supports 2G/3G/4G network connection, global band.Supports network protocols such as TCP/IP/IPV4/IPV6/Multi-PDP/FTP/FTPS/HTTP/HTTPS/DNS.Driver provided, for operating systems including Windows/Linux/Android.
  • Onboard USB port, for directly connecting with ARM/X86 hosts or other industrial computer.Onboard UART port with hardware flow control, for connecting with host boards like Arduino/STM32.
  • Onboard GNSS connecting, supports GPS, Beidou, Glonass, LBS base station positioning (additional GNSS antenna is required but NOT included).
  • Nano SIM card slot, supports 1.8V / 3V nano SIM card.3x LED indicators, easy to monitor the working status.Portable customized enclosure, mini size, nice looking.
  • Baudrate support: 300bps ~ 4Mbps (115200bps by default).Baudrate auto-negotiation: 9600bps ~ 115200bps.
Check Stock

ElectroCookie Solderable Breadboard Large PCB Board for Electronics Projects Compatible for DIY Arduino Soldering Projects Gold-Plated 3 Pack Blue

  • Useful in transferring breadboarded prototypes to reliable and permanent circuits.
  • Popular large breadboard alignment for versatile prototyping purposes.
  • Adaptable with a variety of MCU boards. Compatible with Arduino Nano, Pro Mini, NodeMCU, etc..
  • Gold plated finish to prevent oxidation, and all holes are through-plated for mounting strength.
  • Lead free and RoHS compliant, longer shelf life.
Check Stock

ElectroCookie Solderable Breadboard PCB Double Column Board for Electronics Projects Compatible for DIY Arduino Soldering Projects, Gold-Plated (3 Pack, Blue)

  • Useful in transferring breadboarded prototypes to reliable and permanent circuits.
  • Double-column breadboard alignment for versatile prototyping purposes.
  • Adaptable with a variety of MCU boards. Compatible with Arduino Nano, Pro Mini, NodeMCU, etc..
  • Gold plated finish to prevent oxidation, and all holes are through-plated for mounting strength.
  • Lead free and RoHS compliant, longer shelf life.
Check Stock

ElectroCookie Solderable Breadboard PCB Board for Electronics Projects Compatible for DIY Arduino Soldering Projects Gold-Plated 5 Pack + 1 Mini Board Blue

  • Useful in transferring breadboarded prototypes to reliable and permanent circuits.
  • Popular breadboard alignment for versatile prototyping purposes.
  • Adaptable with a variety of MCU boards. Compatible with Arduino Nano, Pro Mini, NodeMCU, etc..
  • Gold plated finish to prevent oxidation, and all holes are through-plated for mounting strength.
  • Lead free and RoHS compliant, longer shelf life.
Check Stock