Best Atm Fuse Holder

ZOOKOTO Inline Fuse Holder, 16 AWG Gauge Copper Wire Car Auto Blade Fuse Waterproof with 15 AMP Fuse

  • In-line fuse holder for blade fuses,Water resistant cap,High Quality Product.
  • Damp proof and waterproof ,include 15A Fuse.
  • With 16AWG red insulated wire,rated current: 15A, 32V, DC (6V/12V/24V).
  • With Cap design waterproof your electrical connection using this fuse holder.
  • Access to the fuse is by means of a snap-fit lid on the top of the holder, Implementation of standards: National Standard.
Check Stock

ZOOKOTO Inline Fuse Holder, 16 AWG Gauge Copper Wire Car Auto Blade Fuse Waterproof with 10 AMP Fuse

  • In-line fuse holder for blade fuses,Water resistant cap,High Quality Product.
  • Damp proof and waterproof ,include 10A Fuse.
  • With 16AWG red insulated wire,rated current: 10A, 32V, DC (6V/12V/24V).
  • With Cap design waterproof your electrical connection using this fuse holder.
  • Access to the fuse is by means of a snap-fit lid on the top of the holder, Implementation of standards: National Standard.
Check Stock

Nilight - 50029R 120 Pcs Standard Blade Fuse 5A/7.5A/10A/15A/20A/25A/30A AMP Assorted Set with 10 Pack 14AWG ATC/ATO Inline Fuse Holder 2 Years Warranty 1 Count Pack of 10

  • Standard Blade Fuse: 0. 75 x0. 74 x0. 3 Inch. Fuse Type: Blade. Material: Zn alloy/Plastic. Protect your car and your electrical device from short circuit, overload etc.Material:plastic.
  • 10 Pack In-Line Fuse Holder: Heavy duty 14 gauge (AWG) red color wire, great look and added protection to the circuit..
  • Safety Protection: Unique design of the dual slot tight-fitting waterproof lid to enhance moisture-proof and waterproof performance. It's no doubt that this is an inline fuse holder extremely safe and reliable. Easy to use: Turn one fuse slot into two while providing protection for both circuits.
  • Suitable Fuses: Fits for 1A, 2A, 3A, 4A, 5A, 7. 5A, 10A, 15A, 20A, 25A, 30A ATC/ATO blade fuse of 19. 1 × 18. 5 × 5. 1 mm.
  • Package Include: 10 x 14AWG ATC/ATO Inline Fuse Holder and 120 PCs standard blade fuse+Puller.
Check Stock

10ga Fuse Holder 2 Pack MUYI Inline Fuse Holder 10 Gauge Fuse Holders 12v Waterproof Pigtail Blade Fuse Relay with 40AMP ATC Fuses

  • 10 AWG thick red pigtail wire allow you to splice it into any project..
  • Wire length: 6 inches 10 gauge wire each side, Fuse holder dimension: 41x35x15mm.
  • Waterproof design, the rubber cap fits on tightly to protect any standard blade fuse inside. NOT easy to fall off or let water in..
  • Inline Fuse Holder for standard blade fuses, Suitable for 1A,2A,3A,5A,7.5A,10A,15A,20A,30A,40A, ideal for car truck trailer atv boat marine.
  • Package Included: 2 X Standard Blade Fuse Holder and 2 X 40Amp Standard Blade Fuse.
Check Stock

MJIYA Automotive Fuses Assortment, 242PCS Car Fuses, 2/3/5/7.5/10/15/20/25/30/35/40 Amp Fuse Kit, Auto Blade Fuse for Car, Truck, Boat, Marine, RV, SUV, Trike, Vehicles Audio Reset System (242 Pcs)

  • Main useage: Nylon&Aluminum Micro Auto Car Blade Fuses Kit ,Special blade fuses for automotive lighting, audio, UPS, automotive headlights, taillights, parking lights, electronic circuit boards or other electronic products with low voltage circuits.
  • Different color for easy distinguish: Green, Orange, Yellow，Red，Blue, White, Light Gray and so on..
  • 242pc ATO & ATM Style Blade Fuse Set include 2A-3A-5A-7.5A-10A-15A-20A-25A-30A-35A-40A Medium Aluminum Fuse available,each 10pcs.
  • 2A-3A-5A-7.5A-10A-15A-20A-25A-30A-35A-40A Small Aluminum Fuse available, each 12PCS..
  • Portable PVC storage case: 242pcs fuses packed in see-through transparent window PVC storage case for easy storage and taken anywhere..
Check Stock

MCIGICM Fuse Holder 10 Gauge Inline Fuse Holders 10 AWG Waterproof with 40 Amp Fuse 3 Pack

  • Heavy duty 10AWG wire, better protection to the circuit..
  • Wire length: 6 inches 10 gauge wire, Fuse holder dimension: 41x35x15mm.
  • Fits for 1A, 2A, 3A, 4A, 5A, 7.5A, 10A, 15A, 20A, 25A, 30A, 40A ATC/ATO blade fuse..
  • Waterproof design, the rubber cap fits on tightly to protect any standard blade fuse inside..
  • Package included 3 x 10 gauge fuse holder & 3 x 40A blade fuse..
Check Stock

smseace 2pcs 200A ANL fuse with 2pcs ANL fuse holder +4pcs 1/0AWGx5/16 copper ring terminal with 4pcs Heat shrinkable tube for 1/0,2,4AWG used for car audio and other applications

  • 200 AMP ANL Fuse Holder + 200A ANL Fuses, Solid Brass 0/2/4 Gauge (3 PACK), Has stable conductivity..
  • Unique swing-out design of ANL fuse allows replacement of the fuse without removing fastener..
  • The anl fuse block bolt specification is M8*1.25, which is the size of commonly used terminals..
  • The anl fuse holder 1/0 base is made of flame-retardant ABS and has an insulating layer at the bottom..
  • ANL fuse holder is widely applied to inverter, audio amplifier and other high current applications..
Check Stock

Recoil 10 Pack 12V Car Add-a-Circuit Fuse Tap Adapter ATO ATC Blade Fuse Holder with 10pcs 10A,20A Fuses (FT1-10)

  • ATO ATC dual-slot blade fuse holder, stand up to 20A each slot, suitable for any vehicle with a standard fuse slot.
  • Provides one fuse holder to protect existing circuit and a second fuse holder to protect new circuit.
  • Easy installation of additional circuits without splicing or cutting.
  • Use when hardwiring or adding 12V radio, LED light strip, dash cam, GPS, backup camera or any other small electronic device that requires direct wiring into the fuse box.
  • Made from high quality materials, good bending performance, melting resistance and excellent electrical conductivity.
Check Stock

InstallGear 0/2/4 Gauge AWG in-Line ANL Fuse Holder with 150 Amp Fuse

  • LED WARNING INDICATOR: this fuse block with negative bus can easily identify & replace blown fuses immediately without guessing! The LED indicator lights up when a blown fuse is detected. It is both safe and easy for you to check and replace the blown fuse..
  • WIDE USE: This fuse block holder with ground is suitable for all vehicles with a 10-32 Volt DC power source. So it come with multi-function stickers for DIY your specific need, convenient for examination and repair, easy to troubleshoot in outdoor.
  • widely used in vehicle, car, marine , bus, ship, tanker, subway etc.
  • PREMIUM QUALITY: The 6 way fuse box with ground buss is crafted to perfection with the best quality materials and with special attention to detail so it can be incredibly efficient and durable. The fuse box has LED light indicators and a strong construction for guaranteed results.base:PBT,cap:PC,terminal:Nickel plated copper,screw:Stainless steel,label:PP*70.
  • EASY TO SET UP: No need to worry about getting your fuse box ready to use. This 6 circuit fuse box holder with ground is very easy to install..
  • WITH COVER AND FUSE: Transparent plastic cover with push latch system, easy to operate, splash and dust-proof design. Adds extra protection to your fuse box & fuses. With 12 pcs Blade fuse 2 ....
Check Stock

IN-LINE ANL FUSE HOLDER 4 WAY 1x0GA-4x4GA WITH FUSE DISTRIBUTION BLOCK STEREO/AUDIO/CAR

  • This 100Amp power distribution fuse holder is made out of high quality materials in order to get professional results from your car subwoofer audio system..
  • This fuse block holder designed for high performance car audio systems and other electrical high current applications. The power fuse compartment geared up with a heat-resistant acrylic covers and corrosive resistant materials such as gold-plated finish. The new style engineering design makes your installation safe and stylish..
  • Gold Plating Terminal Fuse Block, 4X100A Fuse Included..
  • Screw terminals hold cables securely in place,Fast and easy installation.
Check Stock