Air-Tite rated design meets restricted air flow code requirements which prevents airflow between attic and living areas and saves on both heating and air conditioning costs.
Has four remodel clips which secure the recessed housing and accommodates 1/2 in. and 5/8 in. ceiling material.
Compatible with a wide variety of 4 in. LED retrofit trims but is best with HALO quality RL, RA, SLD, LT, SMD and ML series models (Bulb free with some having a 45 year LED lifespan).
Remodel arm: spring steel construction designed for ease of installation and ceiling support of LED driver.
Slide-N-side junction box: connectors allow non-metallic sheathed cable for both U.S. and Canada to be installed without tools.
3 "Quick Connect" connectors eliminate the need for separate wire nuts - simply strip supply wires and push in.
LED module connection: this non-screw-base LED connection preserves the high efficacy rating of the luminaire.
Can be installed from below the ceiling in home remodel applications, ideal for those who have limited or no access to their ceiling.
Insulation contact rated: designed for insulated ceilings where contact is necessary.
Features an integral thermal protector to guard against misuse of insulation materials and improper lamping.
H1499 4 in. Steel Recessed Lighting Housing for Remodel Shallow Ceiling, Low-Voltage, No Insulation Contact, Air-Tite
Air-Tite rated design meets restricted air flow code requirements which prevents airflow between attic and living areas and saves on both heating and air conditioning costs.
Has four remodel clips which secure the recessed housing and accommodates 1/2 in. and 5/8 in. ceiling material.
Compatible with a wide variety of 4 in. low-voltage recessed light trims but is best with Halo 1496, 1493, 1421, 1420 and 1419 series models.
NM cable pryouts and conduit knockouts in junction box.
Can be installed from below the ceiling in home remodel applications, ideal for those who have limited or no access to their ceiling.
For use in non-insulated ceilings or insulated ceilings where insulation is kept at least 3 in. from all sides of the recessed light fixture.
3 "Quick Connect" connectors eliminate the need for separate wire nuts - simply strip supply wires and push in.
Listed for damp location when used with dedicated wet rated recessed ceiling lights.
Features an integral thermal protector to guard against misuse of insulation materials and improper lamping.
Tamarack TTi HV1600 R38 Whole House Fan (2 Speeds), Insulated Quiet Cool Attic Fan with Remote and Self-Sealing Doors, Duct Free Whole House Attic Fan Improves Air Quality
QUALITY AIRFLOW - Tamarack Technologies’ remote-controlled HV1600 Whole House Fan allows you to avoid using your AC when the outdoor air is cooler than the indoor air. The attic exhaust fan pushes hot air, indoor air pollutants, allergens, moisture and odors out through attic vents or gables while pulling cool, fresh air naturally cooling your home and improving the indoor air quality..
SELF-SEALING DESIGN - The attic fan includes R38 insulated doors that open automatically when the fan is operating and seal shut automatically when the fan is off. The insulated door design prevents cool air from escaping your living area to the attic..
COST-EFFICIENT - Our whole house fans for home have insulated doors that prevent heat loss through the attic during the cooler months. Installing a Tamarack Whole House Fan reduces energy consumption and saves money. Our household ventilation fans use only 10% of energy a central air conditioning system uses and reduces your energy bill..
LONG-LASTING AND MADE IN USA - Made with durable metal material, this quiet cool whole house fan is covered by a lifetime manufacturer's warranty. Th....
【Attic Wall Stairs】Wall-mounted attic wall staircases are becoming more and more popular recently due to their simplicity, elegance, practicality, retractability and small footprint. Attic Wall Ladder Stairs meet most people's needs for a stylish and uncluttered lifestyle..
【Wall Mounted】This attic wall ladder is wall mounted, the frame size is 60x70cm (please refer to the picture), the drop-down attic staircase can install the frame on the vertical wall or vertical plane, but cannot be installed on the ceiling and pulled from the ceiling down..
【12 Steps】The 12-step drop-down attic staircase aluminum has a maximum vertical height of 3 meters/9.8 feet and a step width of 43 cm/16.93 inches. Wall Mounted Loft Wall Ladder Stairs can be used with a simple pull down. You can remove steps to lower the maximum height..
【1000lb Load Capacity】The maximum load capacity of wall mounted attic stairs is 1000 lbs, the step ladder can be widely used in attics and cabin tops, making it easier for you to go up and down the stairs (for your safety, please do not stand multiple people at the same time)..
【Aluminum-magnesium Alloy Material】The attic wall ladder stairs are made of aluminum-magnesium alloy material, which is stable in quality, d....
HALO E26 6 in. Aluminum Recessed Lighting Housing for Remodel Ceiling, Insulation Contact, Air-Tite, (E7RICAT)
Can be installed from below the ceiling in home remodel applications, ideal for those who have limited or no access to their ceiling.
Insulation contact rated: Designed for insulated ceilings where contact is necessary.
Air-Tite rated design meets restricted air flow code requirements which prevents airflow between attic and living areas and saves on both heating and air conditioning costs.
Exclusive remodel speed clamps securely lock from 3/8 in. to 2 in. ceilings eliminating the struggle often experienced with recessed housing clips.
Compatible with a wide variety of 6 inch Recessed light trims but is best with Halo 426, 420, 353, 310, 301, 172, 78, 71, 70, and 30 series models.
Compatible with a wide variety of 6 inch LED retrofit trims but is best with Halo quality RL, RA, SLD, LT, SMD, and ML series models (Bulb free with some having a 45 year LED lifespan).
High performance E26 Series 6 inch trim options available.
Socket bracket adjusts lamp to various trim styles and designs.
Three Quick Connect connectors eliminate the need for separate wire nuts - simply strip supply wires and push in.
Features an integral thermal protector to guard against misuse of insulation materials and improper lamping.
Ventamatic XXFIRESTAT 10-Amp Adjustable Programmable Thermostat with Firestat for Power Attic Ventilators, Replacement Thermostat
FIRESTAT THERMOSTAT: The Ventamatic Firestat Thermostat controls power attic ventilators. The Firestat Temperature Range is 183°F at which point it cuts off the appliance..
ADJUSTABLE THERMOSTAT: The Thermostat is adjustable by the use with a simple screw driver adjustment. It has adjustable bi-metallic switch..
ENERGY EFFICIENT POWER ATTIC VENTILATOR: It provides energy-efficient operation of power attic ventilators and the temperature ranges from 50°F to 120°F..
REPLACEMENT THERMOSTAT: This Ventamatic Replacement Thermostat controls power attic ventilators to promote the equalization of temperatures inside and outside your attic. Firestat safety feature shuts fan off at 183F Controls up to three units, not to exceed 10 amps..
PROGRAMMABLE THERMOSTAT WARRANTY: This thermostat provides 10 years of warranty. It is of opening size 4.8 x 2.5 x 4.8 inches.
HALO H995RICAT LED Recessed Lighting Housing for Remodel Ceiling, T24, Insulation Contact, Air-Tite, Aluminum, 4 in., Silver
Air-Tite rated design meets restricted air flow code requirements which prevents airflow between attic and living areas and saves on both heating and air conditioning costs.
Has four remodel clips which secure the recessed housing and accommodates 1/2 in. and 5/8 in. ceiling material.
Compatible with a wide variety of 4 in. LED retrofit trims but is best with HALO quality RL, RA, SLD, LT, SMD and ML series models (Bulb free with some having a 45 year LED lifespan).
Remodel arm: spring steel construction designed for ease of installation and ceiling support of LED driver.
Slide-N-side junction box: connectors allow non-metallic sheathed cable for both U.S. and Canada to be installed without tools.
3 "Quick Connect" connectors eliminate the need for separate wire nuts - simply strip supply wires and push in.
LED module connection: this non-screw-base LED connection preserves the high efficacy rating of the luminaire.
Can be installed from below the ceiling in home remodel applications, ideal for those who have limited or no access to their ceiling.
Insulation contact rated: designed for insulated ceilings where contact is necessary.
Features an integral thermal protector to guard against misuse of insulation materials and improper lamping.
